lbattraw/hanvon-linux

Driver for Linux kernels which supports complete functionality of the tablet: pen coordinates, touch/float/click detection, pressure, x and y tilt, pen button.

hanvon-linux's Issues

Hanvon Artmaster 0504 Not Working on Ubuntu 18.04

$ lsmod | grep hanvon
hanvon                 16384  0

[ 2161.121274] usb 8-2: USB disconnect, device number 7
[ 2161.429860] usb 8-2: new full-speed USB device number 8 using xhci_hcd
[ 2161.618691] usb 8-2: New USB device found, idVendor=0b57, idProduct=8037
[ 2161.618711] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2161.618713] usb 8-2: Product: ArtMaster 0504
[ 2161.618715] usb 8-2: Manufacturer: Hanvon
[ 2161.618717] usb 8-2: SerialNumber: V2.4
[ 2163.460443] usb 8-2: USB disconnect, device number 8
[ 2163.773866] usb 8-2: new full-speed USB device number 9 using xhci_hcd
[ 2163.955249] usb 8-2: New USB device found, idVendor=0b57, idProduct=8037
[ 2163.955254] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2163.955258] usb 8-2: Product: ArtMaster 0504
[ 2163.955260] usb 8-2: Manufacturer: Hanvon
[ 2163.955263] usb 8-2: SerialNumber: V2.4
[ 4140.529851] hanvon: loading out-of-tree module taints kernel.
[ 4140.529952] hanvon: module verification failed: signature and/or required key missing - tainting kernel
[ 4140.530463] input: Hanvon tablet as /devices/pci0000:00/0000:00:09.0/0000:04:00.0/usb8/8-2/8-2:1.0/input/input28
[ 4140.530909] usbcore: registered new interface driver hanvon
[ 4140.530911] USB Hanvon tablet driver 0.6
[ 4140.583546] hanvon_irq - urb shutting down with status: -2
[ 4140.643509] hanvon_irq - urb shutting down with status: -2
[ 4154.898100] usbcore: deregistering interface driver hanvon
[ 5430.635116] input: Hanvon tablet as /devices/pci0000:00/0000:00:09.0/0000:04:00.0/usb8/8-2/8-2:1.0/input/input29
[ 5430.635529] usbcore: registered new interface driver hanvon
[ 5430.635532] USB Hanvon tablet driver 0.6
[ 5430.679032] hanvon_irq - urb shutting down with status: -2

Hanvon ArtMaster 806 not working

The tablet ArtMaster 806 is not working under Ubuntu 18.04 LTS
Tablet is pluged in.

$ lsmod | grep hanvon
hanvon 16384 0

$ dmesg
...
[ 2.157592] usb 3-4: New USB device found, idVendor=0b57, idProduct=8502
[ 2.157596] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.157599] usb 3-4: Product: ArtMaster 0806+
[ 2.157601] usb 3-4: Manufacturer: Hanvon
[ 2.157604] usb 3-4: SerialNumber: V3.0
[ 2.161475] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.162993] usbcore: registered new interface driver usbhid
[ 2.162993] usbhid: USB HID core driver
[ 2.204123] tsc: Refined TSC clocksource calibration: 2294.786 MHz
[ 2.204139] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
[ 2.204146] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.236128] usb 3-1.1: new low-speed USB device number 4 using xhci_hcd
[ 2.349766] usb 3-1.1: New USB device found, idVendor=046d, idProduct=cab1
[ 2.349768] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.349769] usb 3-1.1: Product: USB Wireless HID Receiver
[ 2.349770] usb 3-1.1: Manufacturer: Logitech
[ 2.419405] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2883
[ 2.419407] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.419408] usb 1-1.3: Product: ASUS USB2.0 Webcam
[ 2.419409] usb 1-1.3: Manufacturer: 04G626000611BQ2AH0002TN
[ 2.436132] usb 3-1.2: new full-speed USB device number 5 using xhci_hcd
[ 2.477991] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 2.491502] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0d.
[ 2.505050] psmouse serio4: elantech: Elan sample query result 07, 15, 64
[ 2.538553] usb 3-1.2: New USB device found, idVendor=046d, idProduct=c52b
[ 2.538557] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.538560] usb 3-1.2: Product: USB Receiver
[ 2.538563] usb 3-1.2: Manufacturer: Logitech
[ 2.573314] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
[ 2.620099] usb 3-1.3: new low-speed USB device number 6 using xhci_hcd
[ 2.740508] usb 3-1.3: New USB device found, idVendor=046a, idProduct=0106
[ 2.740512] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.740515] usb 3-1.3: Product: wired keyboard
[ 2.740518] usb 3-1.3: Manufacturer: Cherry GmbH
[ 2.769742] input: Logitech USB Wireless HID Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:CAB1.0001/input/input14
[ 2.769981] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input2
[ 2.828297] hid-generic 0003:046D:CAB1.0001: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Wireless HID Receiver] on usb-0000:00:14.0-1.1/input0
[ 2.828410] input: Cherry GmbH wired keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:046A:0106.0005/input/input15
[ 2.888236] hid-generic 0003:046A:0106.0005: input,hidraw2: USB HID v1.11 Keyboard [Cherry GmbH wired keyboard] on usb-0000:00:14.0-1.3/input0
[ 2.888376] input: Cherry GmbH wired keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:046A:0106.0006/input/input16
[ 2.900066] input: Logitech Performance MX as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C52B.0004/0003:046D:101A.0008/input/input17
[ 2.948341] hid-generic 0003:046A:0106.0006: input,hiddev1,hidraw3: USB HID v1.11 Device [Cherry GmbH wired keyboard] on usb-0000:00:14.0-1.3/input1
[ 2.948425] logitech-hidpp-device 0003:046D:101A.0008: input,hidraw4: USB HID v1.11 Mouse [Logitech Performance MX] on usb-0000:00:14.0-1.2:2
[ 3.228378] clocksource: Switched to clocksource tsc
[ 7.902221] input: Logitech Unifying Device. Wireless PID:1017 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C52B.0004/0003:046D:1017.0007/input/input18
[ 7.902559] logitech-hidpp-device 0003:046D:1017.0007: input,hidraw5: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-0000:00:14.0-1.2:1
[ 8.029583] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 8.876383] random: crng init done
[ 9.446718] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.547118] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 9.564266] systemd[1]: Detected architecture x86-64.
[ 9.579907] systemd[1]: Set hostname to .
[ 11.265508] systemd[1]: Created slice System Slice.
[ 11.265601] systemd[1]: Listening on Syslog Socket.
[ 11.265664] systemd[1]: Listening on Journal Socket.
[ 11.266191] systemd[1]: Mounting Huge Pages File System...
[ 11.266728] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.278933] systemd[1]: Starting Load Kernel Modules...
[ 11.279495] systemd[1]: Mounting Kernel Debug File System...
[ 11.889586] lp: driver loaded but no devices found
[ 11.927528] ppdev: user-space parallel port driver
[ 12.259619] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 12.563481] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 12.586369] systemd-journald[333]: Received request to flush runtime journal from PID 1
[ 22.893038] audit: type=1400 audit(1527181234.127:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=465 comm="apparmor_parser"
[ 22.893094] audit: type=1400 audit(1527181234.127:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=462 comm="apparmor_parser"
[ 22.893620] audit: type=1400 audit(1527181234.127:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=461 comm="apparmor_parser"
[ 22.893622] audit: type=1400 audit(1527181234.127:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=461 comm="apparmor_parser"
[ 22.893624] audit: type=1400 audit(1527181234.127:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=461 comm="apparmor_parser"
[ 22.893740] audit: type=1400 audit(1527181234.127:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=463 comm="apparmor_parser"
[ 22.893746] audit: type=1400 audit(1527181234.127:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=463 comm="apparmor_parser"
[ 22.894463] audit: type=1400 audit(1527181234.127:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=457 comm="apparmor_parser"
[ 22.894466] audit: type=1400 audit(1527181234.127:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=457 comm="apparmor_parser"
[ 22.894468] audit: type=1400 audit(1527181234.127:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=457 comm="apparmor_parser"
[ 27.618817] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input19
[ 27.635415] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.655063] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170831/utaddress-247)
[ 27.655070] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[ 27.655076] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.655079] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170831/utaddress-247)
[ 27.655084] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20170831/utaddress-247)
[ 27.655089] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.655090] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170831/utaddress-247)
[ 27.655094] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20170831/utaddress-247)
[ 27.655099] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.655100] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170831/utaddress-247)
[ 27.655104] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20170831/utaddress-247)
[ 27.655109] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.655109] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 27.698674] Bluetooth: Core ver 2.22
[ 27.698688] NET: Registered protocol family 31
[ 27.698689] Bluetooth: HCI device and connection manager initialized
[ 27.698691] Bluetooth: HCI socket layer initialized
[ 27.698694] Bluetooth: L2CAP socket layer initialized
[ 27.698698] Bluetooth: SCO socket layer initialized
[ 27.703813] usbcore: registered new interface driver btusb
[ 27.704983] usbcore: registered new interface driver ath3k
[ 27.708216] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 27.708217] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 27.708218] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 27.708218] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 27.716538] AVX version of gcm_enc/dec engaged.
[ 27.716539] AES CTR mode by8 optimization enabled
[ 27.742653] intel_rapl: Found RAPL domain package
[ 27.742655] intel_rapl: Found RAPL domain core
[ 27.742656] intel_rapl: Found RAPL domain uncore
[ 27.742660] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 27.812383] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 240
[ 27.991643] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 27.993429] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 28.017919] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 28.017920] cfg80211: failed to load regulatory.db
[ 28.520041] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 28.619633] ath: phy0: Disable PLL PowerSave
[ 28.627022] ath: phy0: ASPM enabled: 0x42
[ 28.627024] ath: EEPROM regdomain: 0x60
[ 28.627024] ath: EEPROM indicates we should expect a direct regpair map
[ 28.627025] ath: Country alpha2 being used: 00
[ 28.627026] ath: Regpair used: 0x60
[ 28.629788] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.630122] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffb6b341f00000, irq=17
[ 28.666815] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC663: line_outs=2 (0x14/0x16/0x0/0x0/0x0) type:speaker
[ 28.666817] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 28.666818] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 28.666819] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 28.666820] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 28.666821] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 28.666823] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 28.666824] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 28.674952] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 28.674993] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 28.762033] media: Linux media interface: v0.10
[ 28.767256] Linux video capture interface: v2.00
[ 28.779144] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
[ 28.796972] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!
[ 28.796974] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[ 28.796975] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[ 28.797034] input: ASUS USB2.0 Webcam: ASUS USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input22
[ 28.797096] usbcore: registered new interface driver uvcvideo
[ 28.797097] USB Video Class driver (1.1.1)
[ 28.915236] usbcore: registered new interface driver hanwang
[ 28.931269] asus_wmi: ASUS WMI generic driver loaded
[ 28.932460] asus_wmi: Initialization: 0x1
[ 28.932504] asus_wmi: BIOS WMI version: 7.9
[ 28.932560] asus_wmi: SFUN value: 0x6a0877
[ 28.934078] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input24
[ 28.965617] asus_wmi: Number of fans: 1
[ 29.174284] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 34.718229] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.718230] Bluetooth: BNEP filters: protocol multicast
[ 34.718232] Bluetooth: BNEP socket layer initialized
[ 39.109267] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 39.114246] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 39.137816] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 39.152712] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 39.242847] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 40.320253] wlp3s0: authenticate with 34:31:c4:fa:f9:fd
[ 40.334522] wlp3s0: send auth to 34:31:c4:fa:f9:fd (try 1/3)
[ 40.337047] wlp3s0: authenticated
[ 40.340176] wlp3s0: associate with 34:31:c4:fa:f9:fd (try 1/3)
[ 40.345100] wlp3s0: RX AssocResp from 34:31:c4:fa:f9:fd (capab=0x431 status=0 aid=1)
[ 40.345229] wlp3s0: associated
[ 40.351393] ath: EEPROM regdomain: 0x8114
[ 40.351394] ath: EEPROM indicates we should expect a country code
[ 40.351395] ath: doing EEPROM country->regdmn map search
[ 40.351396] ath: country maps to regdmn code: 0x37
[ 40.351398] ath: Country alpha2 being used: DE
[ 40.351398] ath: Regpair used: 0x37
[ 40.351400] ath: regdomain 0x8114 dynamically updated by country IE
[ 40.366474] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 45.788946] kauditd_printk_skb: 34 callbacks suppressed
[ 45.788948] audit: type=1400 audit(1527181257.023:46): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1347 comm="snap-confine" capability=2 capname="dac_read_search"
[ 112.025477] logitech-hidpp-device 0003:046D:101A.0008: HID++ 1.0 device connected.
[ 121.839706] Bluetooth: RFCOMM TTY layer initialized
[ 121.839714] Bluetooth: RFCOMM socket layer initialized
[ 121.839720] Bluetooth: RFCOMM ver 1.11
[ 127.299951] rfkill: input handler disabled
[ 301.579973] usb 3-4: USB disconnect, device number 3
[ 301.887833] usb 3-4: new full-speed USB device number 7 using xhci_hcd
[ 302.037583] usb 3-4: New USB device found, idVendor=0b57, idProduct=8502
[ 302.037588] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 302.037592] usb 3-4: Product: ArtMaster 0806+
[ 302.037595] usb 3-4: Manufacturer: Hanvon
[ 302.037598] usb 3-4: SerialNumber: V3.0
[ 335.840850] usb 3-4: USB disconnect, device number 7
[ 336.146902] usb 3-4: new full-speed USB device number 8 using xhci_hcd
[ 336.296265] usb 3-4: New USB device found, idVendor=0b57, idProduct=8502
[ 336.296270] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 336.296274] usb 3-4: Product: ArtMaster 0806+
[ 336.296277] usb 3-4: Manufacturer: Hanvon
[ 336.296279] usb 3-4: SerialNumber: V3.0
[ 369.155875] usb 3-4: USB disconnect, device number 8
[ 369.462523] usb 3-4: new full-speed USB device number 9 using xhci_hcd
[ 369.611274] usb 3-4: unable to read config index 0 descriptor/all
[ 369.611284] usb 3-4: can't read configurations, error -71
[ 369.738527] usb 3-4: new full-speed USB device number 10 using xhci_hcd
[ 369.887104] usb 3-4: unable to read config index 0 descriptor/all
[ 369.887113] usb 3-4: can't read configurations, error -71
[ 369.887183] usb usb3-port4: attempt power cycle
[ 370.538452] usb 3-4: new full-speed USB device number 11 using xhci_hcd
[ 370.559011] usb 3-4: unable to read config index 0 descriptor/start: -71
[ 370.559018] usb 3-4: can't read configurations, error -71
[ 370.686530] usb 3-4: new full-speed USB device number 12 using xhci_hcd
[ 370.708319] usb 3-4: New USB device found, idVendor=0b57, idProduct=8502
[ 370.708324] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 370.708328] usb 3-4: Product: ArtMaster 0806+
[ 370.708330] usb 3-4: Manufacturer: Hanvon
[ 370.708333] usb 3-4: SerialNumber: V3.0
[ 374.014933] usb 3-4: USB disconnect, device number 12
[ 374.322493] usb 3-4: new full-speed USB device number 13 using xhci_hcd
[ 374.472003] usb 3-4: New USB device found, idVendor=0b57, idProduct=8502
[ 374.472008] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 374.472012] usb 3-4: Product: ArtMaster 0806+
[ 374.472014] usb 3-4: Manufacturer: Hanvon
[ 374.472017] usb 3-4: SerialNumber: V3.0
[ 378.105024] usb 3-4: USB disconnect, device number 13
[ 378.410463] usb 3-4: new full-speed USB device number 14 using xhci_hcd
[ 378.560074] usb 3-4: New USB device found, idVendor=0b57, idProduct=8502
[ 378.560080] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 378.560083] usb 3-4: Product: ArtMaster 0806+
[ 378.560086] usb 3-4: Manufacturer: Hanvon
[ 378.560088] usb 3-4: SerialNumber: V3.0
[ 383.917681] input: Hanvon tablet as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input30
[ 383.917816] usbcore: registered new interface driver hanvon
[ 383.917817] USB Hanvon tablet driver 0.7a
[ 383.982520] hanvon_irq - urb shutting down with status: -2
[ 384.038406] hanvon_irq - urb shutting down with status: -2
[ 395.396771] usb 3-4: USB disconnect, device number 14
[ 395.714378] usb 3-4: new full-speed USB device number 15 using xhci_hcd
[ 395.863962] usb 3-4: New USB device found, idVendor=0b57, idProduct=8502
[ 395.863968] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 395.863971] usb 3-4: Product: ArtMaster 0806+
[ 395.863974] usb 3-4: Manufacturer: Hanvon
[ 395.863976] usb 3-4: SerialNumber: V3.0
[ 395.864930] input: Hanvon tablet as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input32
[ 395.978347] hanvon_irq - urb shutting down with status: -2
[ 408.487042] usb 3-4: USB disconnect, device number 15
[ 408.826331] usb 3-4: new full-speed USB device number 16 using xhci_hcd
[ 408.975937] usb 3-4: New USB device found, idVendor=0b57, idProduct=8502
[ 408.975943] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 408.975946] usb 3-4: Product: ArtMaster 0806+
[ 408.975950] usb 3-4: Manufacturer: Hanvon
[ 408.975953] usb 3-4: SerialNumber: V3.0
[ 408.977025] input: Hanvon tablet as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input34
[ 409.026460] hanvon_irq - urb shutting down with status: -2
[ 409.078308] hanvon_irq - urb shutting down with status: -2
[ 411.261587] usb 3-4: USB disconnect, device number 16
[ 411.566327] usb 3-4: new full-speed USB device number 17 using xhci_hcd
[ 411.715862] usb 3-4: New USB device found, idVendor=0b57, idProduct=8502
[ 411.715867] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 411.715870] usb 3-4: Product: ArtMaster 0806+
[ 411.715873] usb 3-4: Manufacturer: Hanvon
[ 411.715875] usb 3-4: SerialNumber: V3.0
[ 411.716815] input: Hanvon tablet as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input36

Any suggestions?