ldm9958 / sboot Goto Github PK
View Code? Open in Web Editor NEWThis project forked from theopolis/sboot
Standalone libSboot for U-boot
This project forked from theopolis/sboot
Standalone libSboot for U-boot
libSboot -- Standalone These libraries (libSboot, libTLCL) and TPM drivers provide a Secure Boot example for U-boot. A source tree with libSboot built into mainline U-Boot is available at https://github.com/theopolis/u-boot-sboot. Overview: ========= libSboot provides an example 'Secured Boot' for U-Boot and a U-Boot Second Phase Loader (SPL). libSboot attempts to define an example of how a platform can measure a pre-OS boot environment, thus providing a capability to ensure that a libSboot-enforced OS is only loaded in an owner-authorized fashion. A 'Secure Boot' concept is a common means to ensure platform security and integrity; understand that there are many implementations of a 'Secure Boot'. The pre-boot environment is defined as: - The U-Boot binary loaded by a SPL - EEPROM defining platform identification and configuration - Environment data read from an initial external source - Environment variables set via the U-Boot console - Commands interpreted via the U-Boot console - Flat Device Tree files - Initial Ram Disks and Ram Disks - An OS Kernel Currently libSboot does not require augmentation (signatures or keys) to data or configuration options for boot. It only requires patching U-Boot and SPL boot routines to measure and check platform state. This does not provide the user with much robustness. A change to the pre-boot environment will require interaction on the U-Boot console to 'reseal' the configuration. A more robust implementation would apply signature checking to data and options to provide flexible updates to the pre-boot environment. Understanding the implementation of libSboot: libSboot uses a TPM v1.2 to implement a secure boot using a static root of trust measurement (SRTM). The static adjective implies a 'read-only' attribute, meaning libSboot expects its initialization to occur from ROM code. During this initialization libSboot performs a TPM_Start, TPM_SelfTest and checks that the TPM is neither deactivated nor disabled. The TPM must have its NVRAM locked, meaning access control is enforced. Initialization then checks each PCR used to measure the pre-boot environment and verifies they are reset. Finally Physical Presence is asserted to satisfy NVRAM read/write permissions. The sealed data for a securely measured pre-boot environment is stored in TPM NVRAM with a Physical Presence requirement for read and write. Note: the sealed data is an encrypted blob, thus a Physical Presence requirement for reading is not required. Though the Physical Presence requirement for writing is very important! If arbitrary sealed data can be written, then an attacker can measure and store from a compromised OS state. Because of this, libSboot must de-assert Physical Presence and extend the PCRs with random data when libSboot finishes measuring or encounters an error. libSboot uses two sealed blobs stored in TPM NVRAM, one measured for the pre-execution of U-Boot, the other for the OS. This enables flexibility within U-Boot to seal modifications to the pre-boot environment for the U-Boot environment, U-Boot console usage, OS kernel, etc. Modifications to U-Boot are more difficult, U-Boot can issue a re-seal of a new U-Boot binary, but first the PCR which measured the running U-Boot must be reset. This requires an authenticated TPM_Reset command. libSboot will report to the console if an unseal fails, if libSboot is in 'enforce' (see below) mode then a failed unseal will halt execution. This implementation does not depend on the sealed and unsealed data (meaning we can seal well-known data), it only depends on the TPM response (success/failure) of an unseal. Since libSboot does not require authentication during initialization, subsequent initializations will normally fail. There are several ways to assure successful subsequent initializations: (1) build a method for authenticating a TPM owner within the SRTM; (2) require hardware Physical Presence; (3) issue a TPM Reset before the OS reboots. Setup: ====== 1. A working TPM. 2. Ownership of TPM; libSboot uses the Storage Root Key (SRK) for sealing measurements; the TPM must be protected against a reset. 3. TPM NVRAM locked. 4. Two NVRAM defined indexes with Physical Presence required for Read/Write. 5. Hardware write protection for the location of the SRTM (SPL). Configuration Options: ====================== - TPM Drivers CONFIG_TPM This will build libtpm, a TPM device will also need to be configured. CONFIG_TPM_I2C_ATMEL This selects a TPM device (Atmel's AT97SC3204T I2C TPM). A device on an I2C bus also needs to know it's bus ID and address. By default the first (0) I2C bus will be used. CONFIG_TPM_I2C_BUS For boards with multiple I2C buses, you may configure the bus number the TPM device is connected on. CONFIG_TPM_I2C_ADDR The address of the TPM on the I2C bus, usually specific to the device. CONFIG_CMD_TPM Enable the 'tpm' command within the U-Boot shell. The command accepts space-delimited characters to send to the TPM. - libTLCL (TPM Lite Library) This library provide the necessary TPM 1.2 Commands required for libSboot. CONFIG_TLCL_SEAL Adds TlclSeal, TlclUnseal and related methods to libTLCL. CONFIG_CMD_TPM_TLCL Enable the 'tpm_tlcl' command within the U-Boot shell. This command includes methods for testing the TPM. Warning! Some commands set permanent configuration options on the TPM. - libSboot CONFIG_SBOOT Adds libSboot to U-Boot. CONFIG_SPL_SBOOT_SUPPORT Adds libSboot to SPL. CONFIG_SBOOT_UBOOT_SEAL_INDEX Sets the NVRAM index to Seal/Unseal well-known blob data bound to the PCR values for a known-secure state before executing U-Boot. This option value is only used if CONFIG_SPL_SBOOT_SUPPORT is enabled. CONFIG_SBOOT_IMAGE_SEAL_INDEX Same as above, but for the state within U-Boot before executing an OS (kernel or otherwise). CONFIG_SBOOT_DISABLE_CONSOLE_EXTEND Prevent libSboot from measuring U-Boot console commands. (Not Recommended!) CONFIG_SBOOT_DISABLE_ENV_EXTEND Prevent libSboot from measuring U-Boot environments. This includes an external environment store, uEnv.txt, and environment variables set via the U-Boot shell (or other commands). (Not Recommended!) CONFIG_SBOOT_ENFORCE This will cause libSboot to halt execution if it fails to unseal for U-Boot or the OS. Notes: ====== This documentation is a work-in-progress.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.