legrego/homeassistant-combustion

Integrate Combustion thermometers with Home Assistant

homeassistant-combustion's Issues

Add combustion brand images

Add brand images for your integration to https://github.com/home-assistant/brands

Add basic test suite

Setup basic test suite for discovery config flow.

Extract BLE communications into dedicated package.

BLE comms should not be included in this repository, but should instead be a standalone package that this component can leverage.

not detecting probe on raspberry pi

Hello,
I Installed your addon per the directions, and the integration shows up on my list, but no devices are being detected. I'm running HASSOS on a Raspberry Pi 4.

Disable individual temperature sensors by default

We create sensors for each of the 8 thermistors in each probe, in addition to the 3 virtual sensors (Core, Surface, Ambient).

This creates a lot of visual noise. We should disable the 8 individual thermistor sensors by default, leaving only the 3 virtual sensors.

Track battery state

Track the battery state of each connected probe. Probes report OK/Low status, so the best we can do is a binary sensor.

Sensor values retain last value before combustion inc devices go offline

System Health details

System Information

version	core-2024.2.2
installation_type	Home Assistant OS
dev	false
hassio	true
docker	true
user	root
virtualenv	false
python_version	3.12.1
os_name	Linux
os_version	6.1.74-haos
arch	x86_64
timezone	Australia/Sydney
config_dir	/config

Home Assistant Community Store

GitHub API	ok
GitHub Content	ok
GitHub Web	ok
GitHub API Calls Remaining	5000
Installed Version	1.34.0
Stage	running
Available Repositories	1408
Downloaded Repositories	21
HACS Data	ok

Home Assistant Cloud

logged_in	true
subscription_expiration	July 17, 2024 at 10:00 AM
relayer_connected	true
relayer_region	ap-southeast-1
remote_enabled	false
remote_connected	false
alexa_enabled	true
google_enabled	true
remote_server	ap-southeast-1-0.ui.nabu.casa
certificate_status	ready
instance_id	e1feeba07ad74976b9bb4cd4293d2541
can_reach_cert_server	ok
can_reach_cloud_auth	ok
can_reach_cloud	ok

Home Assistant Supervisor

host_os	Home Assistant OS 11.5
update_channel	stable
supervisor_version	supervisor-2024.02.0
agent_version	1.6.0
docker_version	24.0.7
disk_total	30.8 GB
disk_used	11.4 GB
healthy	true
supported	true
board	ova
supervisor_api	ok
version_api	ok
installed_addons	Studio Code Server (5.15.0), Advanced SSH & Web Terminal (17.1.0), Mosquitto broker (6.4.0), Node-RED (17.0.7), openWakeWord (1.8.2), ESPHome (2023.12.9), Samba share (12.3.0), eufy-security-ws (1.7.1)

Dashboards

dashboards	5
resources	18
views	6
mode	storage

Recorder

oldest_recorder_run	February 18, 2024 at 10:50 AM
current_recorder_run	February 19, 2024 at 8:26 PM
estimated_db_size	208.75 MiB
database_engine	sqlite
database_version	3.44.2

Checklist

• I have enabled debug logging for my installation.
• I have filled out the issue template to the best of my ability.
• This issue only contains 1 issue (if you have multiple issues, open one issue for each issue).
• This issue is not a duplicate issue of any previous issues..

Describe the issue

Cards in Home assistant are still showing the last read values, rather than an indication that the devices are offline

Reproduction steps

1.Create entity card
2. add Temps
3.Connect devices, let it do whatever you need with them
4 let the combustion devices turn off
5 values remain

Debug logs

.

Diagnostics dump

No response

Add to HACS

Add this component to the default HACS repository for easier installation.

Don't use advertised address in device creation.

Only register devices when we have a valid serial number in the payload