Warning when sending CAN data

[libresolar]

Warning when sending CAN data

[martinjaeger]

That's because the voltages and temperatures don't fit into a single classical CAN frame. With the new ThingSet SDK packetized reports we send all data items in a multi-frame report to make this work. This was not yet included in the BMS firmware.

I have just merged #65 to include it. Please double-check if the warning has gone.

[Ananyaaynana]

Using commit: https://github.com/LibreSolar/bms-firmware/tree/187d315c7acb94628d0c467649940d386e8e79c5 at this commit the board is not able to send data through CAN. Output at the serial terminal:

Data was not received in the CAN software dashboard.

Using commit: https://github.com/LibreSolar/bms-firmware/tree/50b5bc5bdae9ee7609a8f9edb43ee9fb062481d9 at this commit the board can send data through CAN. Output at the serial terminal:

Data received in the CAN software dashboard.

[martinjaeger]

Sorry, I forgot to enable one additional required Kconfig. Fixed in main now. See this commit: fb078cc

[Ananyaaynana]

Data received on the CAN software dashboard.
Output on serial terminal:

Thank you for the help!