linuxmint / mintsystem Goto Github PK
View Code? Open in Web Editor NEWHome Page: https://www.linuxmint.com
Home Page: https://www.linuxmint.com
Hello to all.
Problem: sometimes after removing some program, some of it's dependencies are left in system and you can't find them.
This is not problem, that I noticed recent, it pent me over years.
Started when I installed some program with QT as dependency, I removed that program, but some of dependencies were left. I sweared some time and tried to remove them all manually (searching them in logs, etc).
Time went and sometimes I met with such "bugs". Then I got used to avoid such situations with user-tags from aptitude, but this spent many time, I always forgot needed commands, in short, it was boring work.
Today I met with it again in #linuxmint-ru channel, they told me about this error again.
I'm sure, the time came to correct this behavior, it hurts to all.
Example: when we install package "rpm" (apt install rpm
(mint's apt uses "/usr/bin/apt" for this)),:
debugedit librpm3 librpmbuild3 librpmio3 librpmsign3 rpm-common rpm2cpio
,rpm-i18n alien elfutils rpmlint rpm2html
,debugedit librpm3 librpmbuild3 librpmio3 librpmsign3 rpm rpm-common rpm2cpio
Well, we used this package near half of year, it became not needed to us. What was installed with it we don't remember, logs were removed. Let's remove it: apt purge rpm
:
rpm*
debugedit librpmbuild3 librpmsign3
sudo apt autoremove
) (ontly 3 of 7 are not needed any more)librpm3, librpmio3 rpm-common rpm2cpio
) were lost.Let's figurte it out why.
All 7 dependency packages were marked as automatically installed, only "rmp" was marked as manually installed.
Let's try aptitude (sudo aptitude purge rpm
):
debugedit{u} librpm3{u} librpmbuild3{u} librpmio3{u} librpmsign3{u} rpm{p} rpm-common{u} rpm2cpio{u}
So aptitude has not his bug. Also I heared that there are many dependency types in apt, like:
"depends", "depends, but not very much", "recommends", "recommends, but not very much".
But I had not found such information on Wiki.
Maybe apt has such strange gradations and that's why it has such bug?
In package itself (in "control.tar.gz/control" file) all that packages (that were installed with "rpm") were in "dependencies" section:
Depends: libc6 (>= 2.17), libelf1 (>= 0.131), libpopt0 (>= 1.14), librpm3 (>= 4.12.0.1), librpmbuild3 (>= 4.10.0), librpmio3 (>= 4.10.0), librpmsign3 (>= 4.12.0.1), perl, rpm2cpio, debugedit (= 4.12.0.1+dfsg1-3build3), rpm-common (= 4.12.0.1+dfsg1-3build3)
Also there were not any "magic" sections like "not very depends", only "depends", "suggests", "breaks", "replaces"; in our case are figuring first two.
My suggestion: #62 (comment)
/var/spool/anacrom seems to be needed by anacron to hold files called cron.daily, cron.weekly and cron.monthly which contain the date they were last run. The folder is missing on both of my machines running Mint 19. The result is that anacron.service fails as there is no folder to access.
The syslog showed:
....
Aug 26 14:00:18 defiant systemd[1]: Started Run anacron jobs.
Aug 26 14:00:18 defiant anacron[5859]: Can't chdir to /var/spool/anacron: No such file or directory
Aug 26 14:00:18 defiant anacron[5859]: anacron: Can't chdir to /var/spool/anacron: No such file or directory
Aug 26 14:00:18 defiant systemd[1]: anacron.service: Main process exited, code=exited, status=1/FAILURE
Aug 26 14:00:18 defiant systemd[1]: anacron.service: Failed with result 'exit-code'.
...
The result is that anacron does not run and logrotate is not called and the log files gradually fill up which is how I discovered the problem.
I created /var/spool/anacron by sudo mkdir /var/spool/anacron
after which syslog showed anacron running and the cron jobs being started
......
Aug 26 16:07:33 defiant anacron[17957]: Job `cron.weekly' started
Aug 26 16:07:33 defiant anacron[27690]: Updated timestamp for job `cron.weekly' to 2018-08-26
Aug 26 16:08:01 defiant anacron[17957]: Job `cron.weekly' terminated
....
and the log files are now rotating.
This may have been caused by an update as I found some rotated log files up to 16th July but I have not been able to find out more.
inxi output
System: Host: defiant Kernel: 4.15.0-33-generic x86_64 bits: 64
Desktop: Cinnamon 3.8.8 Distro: Linux Mint 19 Tara
Machine: Device: laptop System: Notebook product: W230ST serial: N/A
Mobo: Notebook model: W230ST serial: N/A
BIOS: American Megatrends v: 4.6.5 date: 11/18/2013
Battery BAT0: charge: 56.9 Wh 100.0% condition: 56.9/62.2 Wh (91%)
CPU: Quad core Intel Core i7-4700MQ (-MT-MCP-) cache: 6144 KB
clock speeds: max: 3400 MHz 1: 1995 MHz 2: 1996 MHz 3: 1995 MHz 4: 1995 MHz
5: 1996 MHz 6: 1996 MHz 7: 1995 MHz 8: 1998 MHz
Graphics: Card-1: Intel 4th Gen Core Processor Integrated Graphics Controller
Card-2: NVIDIA GK106M [GeForce GTX 765M]
Display Server: x11 (X.Org 1.19.6 )
drivers: modesetting (unloaded: fbdev,vesa)
Resolution: [email protected]
OpenGL: renderer: Mesa DRI Intel Haswell Mobile version: 4.5 Mesa 18.0.5
Audio: Card-1 Intel 8 Series/C220 Series High Def. Audio Controller
driver: snd_hda_intel
Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.15.0-33-generic
Network: Card-1: Intel Centrino Advanced-N 6235 driver: iwlwifi
IF: wlp3s0 state: up mac: c4:d9:87:0a:df:a2
Card-2: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
driver: r8169
IF: enp4s0f1 state: down mac: 00:90:f5:f7:1d:5b
Drives: HDD Total Size: 1250.3GB (47.5% used)
ID-1: /dev/sda model: Samsung_SSD_860 size: 250.1GB
ID-2: /dev/sdb model: ST1000LM014 size: 1000.2GB
Partition: ID-1: / size: 41G used: 27G (71%) fs: ext4 dev: /dev/sda2
ID-2: /home size: 139G used: 30G (23%) fs: ext4 dev: /dev/sda4
ID-3: swap-1 size: 16.78GB used: 0.00GB (0%) fs: swap dev: /dev/sdb3
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 65.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 299 Uptime: 5 days Memory: 5570.4/7896.9MB
Client: Shell (bash) inxi: 2.3.56
Hi,
apt is not working with * symbol.
sudo apt purge nvidia-prime*
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package nvidia-prime*
but apt-get is working.
sudo apt-get purge nvidia-prime*
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'nvidia-prime' for glob 'nvidia-prime*'
Note, selecting 'nvidia-prime-applet' for glob 'nvidia-prime*'
The following packages will be REMOVED:
nvidia-prime* nvidia-prime-applet*
0 upgraded, 0 newly installed, 2 to remove and 58 not upgraded.
After this operation, 104 kB disk space will be freed.
Do you want to continue? [Y/n]
The code and the instructions have been posted here almost two years ago: http://forums.linuxmint.com/viewtopic.php?f=148&t=82867
I've tried it - apt is much better with autocompletion :)
When starting Linux Mint MATE 17.2, Grub proposes to start Memtest86+ version 4.2.
But there's a newer version of Memtest86+ : 5.01.
Linux Mint 18.3 'Sylvia'
The program highlight
of the package highlight
is not usable when ommitting the path.
The path of /usr/local/bin/highlight
(mintsystem highlight) has precedence over /usr/bin/highlight
(highlight package) if you simply invoke highlight
. This affects at least the filemanager ranger, whose scope.sh uses highlight
without specifying a path.
Install highlight
and try to use it:
$ sudo apt-get install highlight
$ # The following command will hang, because it represents the mintsystem highlight script, which waits for input
$ highlight --syntax=bash --out-format=ansi /usr/local/bin/highlight
$ # will not hang, because it represents the original program
$ /usr/bin/highlight --syntax=bash --out-format=ansi /usr/local/bin/highlight
$ sudo apt-get install ranger highlight
$ # create basic ~/.config/ranger files
$ # notice that simple text files are previewed in the 3rd column
$ ranger
$ # copy /etc/ranger/ configuration files (includes scope.sh) to ~/.config/ranger/
$ ranger --copy-config=all
$ # the following call will no longer preview simple text files
$ ranger
The filemanager ranger will fail to preview text files after the recommended ranger --copy-config=all
or ranger --copy-config=scope
(as soon as ~/.config/ranger/scope.sh exists, which is configured to be used for previews in /etc/ranger/config/rc.conf
resp. ~/.config/ranger/rc.conf
.
$ # will replace the wrapped highlight command with /usr/bin/highlight in the scope script
$ sed -i 's/command highlight/command \/usr\/bin\/highlight/' ~/.config/ranger/scope.sh
Rename /usr/local/bin/highlight
to /usr/local/bin/highlight-mint
.
[Edit] replaced wrong path /usr/local/ with /usr/local/bin/
Hello,
The python script provided, which is a helper/wrapper for "apt" commands, suffers from shell command injection. The script on a Linux Mint system is located here - /usr/local/bin/apt.
As seen here in the source - https://github.com/linuxmint/mintsystem/blob/master/usr/local/bin/apt, the Python script does not sanitize the user input at all, and therefore it is possible to inject shell commands via the user input.
An example of this,
$ apt install "vim && sudo bash"
Reading package lists... Done
Building dependency tree
Reading state information... Done
vim is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 27 not upgraded.
# id
uid=0(root) gid=0(root) groups=0(root)
In this case, when a user sends "vim && sudo bash" as input, the script also spawns a root shell because the script already uses sudo, if the user is not root.
This can be easily exploited by tricking someone into executing shell commands with root permissions. An attacker would just need to social engineer the victim into putting his desired input as a package name.
The bug can be fixed by either using subprocess or shlex module.
Regards,
c0dist @ Garage4Hackers.
/usr/local/bin/apt
currently overrides /usr/bin/apt
, the system package provided by Debian/Ubuntu. This is not a problem, per-se, except that it does not behave the same as the system package which can cause confusion when people are looking online for help, or when they expect it to behave as Debian/Ubuntu's "apt" does.
/usr/local/bin/apt
should be updated to provide a strict superset of the functionality of the system "apt" by wrapping the commands it provides. This will make Mint's "apt" behavior consistent with that of Debian and Ubuntu where the two overlap.
The option to check the SHA256 hash is also displayed on folders ending with iso. The cause is the line Extensions=iso;img;
. Maybe use MIME types instead like Mimetypes=application/x-iso9660-image;
? I will provide a pull request to fix this shortly.
mintsystem: 8.3.9
/usr/local/bin/apt currently passes the deprecated markauto command through to apt-mark but not the auto command that has replaced it. This seems incongruous. The general handling of auto and manual results in the following situation:
auto: apt-mark accepts
markauto: apt mark accepts but deprecated; Mint apt accepts
manual: apt-mark accepts
unmarkauto: apt-mark accepts but deprecated
markmanual: Mint apt accepts
It would probably be useful to add aliases so that all of these are passed through.
Imho the search for apt should be returned back from aptitude to /usr/bin/apt.
For an example:
$ /usr/local/bin/apt search "remote desktop client" | wc -l
1173
$ /usr/bin/apt search "remote desktop client" | wc -l
35
Where the latter gives much better results, where as the previous (aptitude
) ignores the quotes and searches for each word separately.
Using apt instead of aptitude for searching would also give the same results as the searches on Ubuntu's apt, which would be better when, for an example, one is following online guides and tutorials.
Should anyone want especially the search results from aptitude, aptitude itself could be used. Now this is just confusing.
The Flatpak (system) repo was automatically re-enabled on my system when I upgraded to 19.2 (from 19.1). Can you please give users to the option to leave their current configs alone? I always switch to the user repo, keeping / as pristine as possible.
~/.bash_aliases
does still work, though (and the contents of '/etc/.bash_aliases' works if, and only if, I copy that content into ~/.bash_aliases
).
For example, on a system where I removed nano and installed vim instead, apt sources does not work.
I suggest using $EDITOR, or /usr/bin/editor, or /usr/bin/sensible-editor - in the order described here: http://www.debian.org/doc/debian-policy/ch-customized-programs.html#s11.4
$ apt download python3
......
71 packages can be upgraded. Run 'apt list --upgradable' to see them.
download: you must specify at least one package to download
xargs: aptitude: exited with status 255; aborting
Doesn't download because python3 is already installed. Uninstalled (and upgradable) packages download without issue.
Relevant code: (https://github.com/linuxmint/mintsystem/blob/master/usr/local/bin/apt#L112)
The help command isn't displayed either:
$ apt help download
Traceback (most recent call last):
File "/usr/local/bin/apt", line 107, in <module>
archive_name = argoptions.split()[0]
IndexError: list index out of range
I'm working on a Trash mystery and have encountered some bugs/flaws in Mint (or Gnome?).
It appears that Mint in general, and Nemo in particular may not conform with this:
The FreeDesktop.org Trash specification Written by Mikhail Ramendik <[email protected]> Content by David Faure <[email protected]>, Alexander Larsson <[email protected]> and others on the FreeDesktop.org mailing list Version 0.7
or may be imposing a non-compliant and unpublished method regarding Trash.
Also, it appears that MInt does not conform with 'https://www.freedesktop.org/wiki/Specifications/basedir-spec/', regarding required environmental variables, to wit:
mark@mark-Lenovo-V570 ~ $ echo $XDG_DATA_DIRS
/usr/share/cinnamon:/usr/share/gnome:/usr/local/share/:/usr/share/:/usr/share/mdm/
mark@mark-Lenovo-V570 ~ $ echo $XDG_CONFIG_DIRS
/etc/xdg/xdg-cinnamon:/etc/xdg
mark@mark-Lenovo-V570 ~ $ echo $XDG_DATA_HOME
mark@mark-Lenovo-V570 ~ $ echo $XDG_CACHE_HOME
mark@mark-Lenovo-V570 ~ $ echo $XDG_CONFIG_HOME
mark@mark-Lenovo-V570 ~ $
I've encountered these problems while working on the following Trash mystery.
Step #1: I ran this script:
#!/bin/bash
echo This is a test>~/.local/share/Trash/files/bash.txt;
(
echo [Trash Info];
echo Path=~/bash.txt;
echo DeletionDate=$(date "+%Y-%m-%d"T"%T")
)>~/.local/share/Trash/info/bash.txt.trashinfo
It successfully created an entity named 'bash.txt' in the Trash.
Step #2: I echoed "This is a test" to '~/nemo.txt', then deleted it via Nemo.
Step #3: I compared the 2 'trashinfo' files.
mark@mark-Lenovo-V570 ~/.local/share/Trash/info $ xxd bash.txt.trashinfo
00000000: 5b54 7261 7368 2049 6e66 6f5d 0a50 6174 [Trash Info].Pat
00000010: 683d 2f68 6f6d 652f 6d61 726b 2f62 6173 h=/home/mark/bas
00000020: 682e 7478 740a 4465 6c65 7469 6f6e 4461 h.txt.DeletionDa
00000030: 7465 3d32 3031 362d 3130 2d31 3254 3133 te=2016-10-12T13
00000040: 3a31 323a 3030 0a :12:00.
mark@mark-Lenovo-V570 ~/.local/share/Trash/info $ xxd nemo.txt.trashinfo
00000000: 5b54 7261 7368 2049 6e66 6f5d 0a50 6174 [Trash Info].Pat
00000010: 683d 2f68 6f6d 652f 6d61 726b 2f6e 656d h=/home/mark/nem
00000020: 6f2e 7478 740a 4465 6c65 7469 6f6e 4461 o.txt.DeletionDa
00000030: 7465 3d32 3031 362d 3130 2d31 3254 3133 te=2016-10-12T13
00000040: 3a31 343a 3539 0a :14:59.
So far so good. But when I select the 2 files in the Trash utility and attempt to restore them (Restore Selected Items), 'nemo.txt' restores fine, but 'bash.txt' produces this error:
Could not determine original location of "bash.txt"
The item cannot be restored from trash
The properties and permissions of the 2 files are identical.
There must be something deficient about the 'bash.txt.trashinfo' file created by my script that prevents subsequently restoring 'bash.txt'.
What could it be?
This part doesn't work and hasn't in a while:
os.system("LC_ALL=C apt-get install --dry-run %s | grep ^Inst | awk {'print $2;'} | xargs aptitude download -r" % package.name)
aptitude download
is a wrapper for apt, thus this calls apt -r download
, which fails due to the bug in the apt script I reported here.
It would however fail regardless because the -r is no valid option for apt or apt-get.
Suggest to simply replace aptitude download -r
with /usr/bin/apt download
Modifying /etc/lsb-release is a bad idea, as we are using packages from ubuntu, some package maintainers uses /etc/lsb-release instead of /etc/os-release to detect version and take decisions.
Therefore modifying it could lead to unpredictable results.
For instance libvirt
package:
ifeq ($(shell dpkg --compare-versions "$(shell grep DISTRIB_RELEASE /etc/lsb-release | cut -d= -f2)" ge "14.04" && echo "yes"),yes)
APPARMOR_REQ = -V'dist:Conflicts=apparmor (<< 2.8.95~2430-0ubuntu4)'
endif
ifeq ($(shell dpkg --compare-versions "$(shell grep DISTRIB_RELEASE /etc/lsb-release | cut -d= -f2)" ge "14.10" && echo "yes"),yes)
APPARMOR_REQ = -V'dist:Conflicts=apparmor (<< 2.8.96~2652-0ubuntu1)'
endif
the new pastebin does not allow options to pass to gist-paste , option -P can be a hilite and share but i cant make it work, on lm18-plasma, i dont know if its the way the command was quoted in that code chunk
ref: the source code for the script
SimonNL tested the idea, inxi -F
pastebin -P , i get the same result on lm18-plasma
i believe the 'gist-paste' command is not accepting the option -P
This is for Mint 17.3 Rosa, hopefully it can still be fixed: wrapper /usr/local/bin/apt
is missing list
command.
% dpkg -S /usr/local/bin/apt
mintsystem: /usr/local/bin/apt
% apt version mintsystem
8.1.6+1
% /usr/local/bin/apt list
apt
Usage: apt command [options]
apt help command [options]
Commands:
...
% /usr/bin/apt list
WARNING: /usr/bin/apt does not have a stable CLI interface yet. Use with caution in scripts.
Listing...
0ad/trusty 0.0.15+dfsg-3 amd64
0ad-data/trusty 0.0.15-1 all
0ad-data-common/trusty 0.0.15-1 all
...
Is there a way to update mintsystem
to a corrected version?
@clefebvre hope you see this.
With the latest Mint with a Enc.+LVM setup, during BIOS start up I can flip between uppercase and lowercase with my computer indicating them with a on/off light just fine.
But when I reach the screen where I have to type my enc. password when clicking the Caps Lock button the light does not appear so it doesn't indicate whether I am using uppercase or lowercase.
Only happens during this screen. Once I get past this screen to log into my Desktop, the Caps Lock indicator is working fine. Why is this?
Due to other packages requiring python3 to be the default python, I changed /usr/bin/python to point to python3.
Error goes away when I set python to point to python2.
Preparing to unpack .../skypeforlinux_5.2.0.1_amd64.deb ...
Unpacking skypeforlinux (5.2.0.1) over (5.1.0.1) ...
Processing triggers for mintsystem (7.9.3+1) ...
File "/usr/lib/linuxmint/mintSystem/mint-adjust.py", line 128
except Exception, detail:
^
SyntaxError: invalid syntax
dpkg: error processing package mintsystem (--unpack):
subprocess installed post-installation script returned error exit status 1
Processing triggers for mime-support (3.54ubuntu1.1) ...
Linux Mint 19.1 MATE. System is up to date.
warning: core file may not match specified executable file.
[New LWP 1540]
[New LWP 1541]
[New LWP 1542]
[New LWP 1543]
[New LWP 1686]
[New LWP 1736]
[New LWP 1551]
[New LWP 1737]
[New LWP 1738]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/bin/mate-settings-daemon'.
Program terminated with signal SIGABRT, Aborted.
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
51 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0x7f1ce507da80 (LWP 1540))]
warning: core file may not match specified executable file.
[New LWP 1540]
[New LWP 1541]
[New LWP 1542]
[New LWP 1543]
[New LWP 1686]
[New LWP 1736]
[New LWP 1551]
[New LWP 1737]
[New LWP 1738]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/bin/mate-settings-daemon'.
Program terminated with signal SIGABRT, Aborted.
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
51 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0x7f1ce507da80 (LWP 1540))]
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
#1 0x00007f1ce2bee801 in __GI_abort () at abort.c:79
#2 0x00007f1ce3231335 in g_assertion_message () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#3 0x00007f1ce323139a in g_assertion_message_expr () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#4 0x00007f1cbffffa21 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse-mainloop-glib.so.0
#5 0x00007f1ccbb734e5 in pa_pstream_unlink () from /usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecommon-11.1.so
#6 0x00007f1ccbdbe095 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#7 0x00007f1ccbdbe8a0 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#8 0x00007f1ccbdc01e5 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#9 0x00007f1ccbdc16da in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#10 0x00007f1ccbb6dc61 in ?? () from /usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecommon-11.1.so
#11 0x00007f1cbffffec8 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse-mainloop-glib.so.0
#12 0x00007f1ce320a417 in g_main_context_dispatch () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#13 0x00007f1ce320a650 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#14 0x00007f1ce320a962 in g_main_loop_run () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#15 0x00007f1ce3effa25 in gtk_main () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
#16 0x0000558be84befff in main ()
warning: core file may not match specified executable file.
[New LWP 1540]
[New LWP 1541]
[New LWP 1542]
[New LWP 1543]
[New LWP 1686]
[New LWP 1736]
[New LWP 1551]
[New LWP 1737]
[New LWP 1738]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/bin/mate-settings-daemon'.
Program terminated with signal SIGABRT, Aborted.
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
51 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0x7f1ce507da80 (LWP 1540))]
Thread 9 (Thread 0x7f1cb86d2700 (LWP 1738)):
#0 0x00007f1ce2cc2bf9 in __GI___poll (fds=0x7f1cb86d1ad0, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
resultvar = 18446744073709551100
sc_cancel_oldtype = 0
sc_ret =
#1 0x00007f1cbf9237c4 in snd_mixer_wait () from /usr/lib/x86_64-linux-gnu/libasound.so.2
No symbol table info available.
#2 0x00007f1cbfbecfca in ?? () from /usr/lib/x86_64-linux-gnu/libmatemixer/libmatemixer-alsa.so
No symbol table info available.
#3 0x00007f1ce3232195 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#4 0x00007f1ce2fa66db in start_thread (arg=0x7f1cb86d2700) at pthread_create.c:463
pd = 0x7f1cb86d2700
now =
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {139761329972992, -1026562045266917821, 139761329970304, 0, 139761792610000, 140720485833744, 1151122257049257539, 1151002543060649539}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call =
#5 0x00007f1ce2ccf88f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
No locals.
Thread 8 (Thread 0x7f1cb96d4700 (LWP 1737)):
#0 syscall () at ../sysdeps/unix/sysv/linux/x86_64/syscall.S:38
No locals.
#1 0x00007f1ce325077f in g_cond_wait () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#2 0x00007f1cbfbed00d in ?? () from /usr/lib/x86_64-linux-gnu/libmatemixer/libmatemixer-alsa.so
No symbol table info available.
#3 0x00007f1ce3232195 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#4 0x00007f1ce2fa66db in start_thread (arg=0x7f1cb96d4700) at pthread_create.c:463
pd = 0x7f1cb96d4700
now =
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {139761346758400, -1026562045266917821, 139761346755712, 0, 94059419329696, 140720485833744, 1151120059099743811, 1151002543060649539}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call =
#5 0x00007f1ce2ccf88f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
No locals.
Thread 7 (Thread 0x7f1cca4c8700 (LWP 1551)):
#0 0x00007f1ce2cc2bf9 in __GI___poll (fds=0x558bea1bc0b0, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
resultvar = 18446744073709551100
sc_cancel_oldtype = 0
sc_ret =
#1 0x00007f1ce320a5c9 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#2 0x00007f1ce320a6dc in g_main_context_iteration () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#3 0x00007f1ce112a82d in ?? () from /usr/lib/x86_64-linux-gnu/libdconf.so.1
No symbol table info available.
#4 0x00007f1ce3232195 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#5 0x00007f1ce2fa66db in start_thread (arg=0x7f1cca4c8700) at pthread_create.c:463
pd = 0x7f1cca4c8700
now =
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {139761629824768, -1026562045266917821, 139761629822080, 0, 94059416719520, 140720485836944, 1151091757412746819, 1151002543060649539}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call =
#6 0x00007f1ce2ccf88f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
No locals.
Thread 6 (Thread 0x7f1cb9ed5700 (LWP 1736)):
#0 0x00007f1ce2cc2bf9 in __GI___poll (fds=0x7f1c94001b30, nfds=3, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
resultvar = 18446744073709551100
sc_cancel_oldtype = 0
sc_ret =
#1 0x00007f1ccbde2481 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
No symbol table info available.
#2 0x00007f1ccbdd3e40 in pa_mainloop_poll () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
No symbol table info available.
#3 0x00007f1ccbdd44d0 in pa_mainloop_iterate () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
No symbol table info available.
#4 0x00007f1ccbdd4560 in pa_mainloop_run () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
No symbol table info available.
#5 0x00007f1ccbde23c9 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
No symbol table info available.
#6 0x00007f1ccbb84318 in ?? () from /usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecommon-11.1.so
No symbol table info available.
#7 0x00007f1ce2fa66db in start_thread (arg=0x7f1cb9ed5700) at pthread_create.c:463
pd = 0x7f1cb9ed5700
now =
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {139761355151104, -1026562045266917821, 139761355148416, 0, 94059419056976, 140720485824944, 1151118961198728771, 1151002543060649539}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call =
#8 0x00007f1ce2ccf88f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
No locals.
Thread 5 (Thread 0x7f1cb6ecf700 (LWP 1686)):
#0 syscall () at ../sysdeps/unix/sysv/linux/x86_64/syscall.S:38
No locals.
#1 0x00007f1ce325089a in g_cond_wait_until () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#2 0x00007f1ce31dd571 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#3 0x00007f1ce31ddb2c in g_async_queue_timeout_pop () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#4 0x00007f1ce3232c3e in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#5 0x00007f1ce3232195 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#6 0x00007f1ce2fa66db in start_thread (arg=0x7f1cb6ecf700) at pthread_create.c:463
pd = 0x7f1cb6ecf700
now =
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {139761304794880, -1026562045266917821, 139761304792192, 0, 94059417270592, 140720485836944, 1151099183948072515, 1151002543060649539}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call =
#7 0x00007f1ce2ccf88f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
No locals.
Thread 4 (Thread 0x7f1cd9033700 (LWP 1543)):
#0 0x00007f1ce2cc2bf9 in __GI___poll (fds=0x7f1cd401d590, nfds=2, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
resultvar = 18446744073709551100
sc_cancel_oldtype = 0
sc_ret =
#1 0x00007f1ce320a5c9 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#2 0x00007f1ce320a962 in g_main_loop_run () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#3 0x00007f1ce37f80e6 in ?? () from /usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
No symbol table info available.
#4 0x00007f1ce3232195 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#5 0x00007f1ce2fa66db in start_thread (arg=0x7f1cd9033700) at pthread_create.c:463
pd = 0x7f1cd9033700
now =
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {139761876678400, -1026562045266917821, 139761876675712, 0, 94059415743264, 139761893460096, 1151049330115184195, 1151002543060649539}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call =
#6 0x00007f1ce2ccf88f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
No locals.
Thread 3 (Thread 0x7f1cd9834700 (LWP 1542)):
#0 0x00007f1ce2cc2bf9 in __GI___poll (fds=0x7f1cd4007ce0, nfds=2, timeout=2662) at ../sysdeps/unix/sysv/linux/poll.c:29
resultvar = 18446744073709551100
sc_cancel_oldtype = 0
sc_ret =
#1 0x00007f1ce320a5c9 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#2 0x00007f1ce320a6dc in g_main_context_iteration () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#3 0x00007f1ce320a721 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#4 0x00007f1ce3232195 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#5 0x00007f1ce2fa66db in start_thread (arg=0x7f1cd9834700) at pthread_create.c:463
pd = 0x7f1cd9834700
now =
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {139761885071104, -1026562045266917821, 139761885068416, 0, 94059415743104, 139761893459712, 1151048230066685507, 1151002543060649539}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call =
#6 0x00007f1ce2ccf88f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
No locals.
Thread 2 (Thread 0x7f1cda035700 (LWP 1541)):
#0 0x00007f1ce2cc2bf9 in __GI___poll (fds=0x558bea109de0, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
resultvar = 18446744073709551100
sc_cancel_oldtype = 0
sc_ret =
#1 0x00007f1ce320a5c9 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#2 0x00007f1ce320a6dc in g_main_context_iteration () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#3 0x00007f1cda03d36d in ?? () from /usr/lib/x86_64-linux-gnu/gio/modules/libdconfsettings.so
No symbol table info available.
#4 0x00007f1ce3232195 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#5 0x00007f1ce2fa66db in start_thread (arg=0x7f1cda035700) at pthread_create.c:463
pd = 0x7f1cda035700
now =
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {139761893463808, -1026562045266917821, 139761893461120, 0, 94059415740736, 140720485836416, 1151055928258692675, 1151002543060649539}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call =
#6 0x00007f1ce2ccf88f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
No locals.
Thread 1 (Thread 0x7f1ce507da80 (LWP 1540)):
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
set = {__val = {0, 94059417815425, 94059417815444, 94059417815344, 94059417815444, 0, 2064, 124, 139761457038641, 140720485836896, 139762043821120, 139762040317912, 566935683072, 2048, 343597383680, 7}}
pid =
tid =
ret =
#1 0x00007f1ce2bee801 in __GI_abort () at abort.c:79
save_stage = 1
act = {__sigaction_handler = {sa_handler = 0xfefefeff, sa_sigaction = 0xfefefeff}, sa_mask = {__val = {94059417816592, 0, 140720485836896, 140720308486145, 8863086342219767808, 72057594037927936, 16777216, 5548434740920451072, 139759930310656, 94059417816592, 0, 0, 8863086342219767808, 139761457038641, 94059417816592, 78}}, sa_flags = -481477152, sa_restorer = 0x7ffc0a922860}
sigs = {__val = {32, 0 <repeats 15 times>}}
__cnt =
__set =
__cnt =
__set =
#2 0x00007f1ce3231335 in g_assertion_message () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#3 0x00007f1ce323139a in g_assertion_message_expr () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#4 0x00007f1cbffffa21 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse-mainloop-glib.so.0
No symbol table info available.
#5 0x00007f1ccbb734e5 in pa_pstream_unlink () from /usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecommon-11.1.so
No symbol table info available.
#6 0x00007f1ccbdbe095 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
No symbol table info available.
#7 0x00007f1ccbdbe8a0 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
No symbol table info available.
#8 0x00007f1ccbdc01e5 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
No symbol table info available.
#9 0x00007f1ccbdc16da in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
No symbol table info available.
#10 0x00007f1ccbb6dc61 in ?? () from /usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecommon-11.1.so
No symbol table info available.
#11 0x00007f1cbffffec8 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse-mainloop-glib.so.0
No symbol table info available.
#12 0x00007f1ce320a417 in g_main_context_dispatch () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#13 0x00007f1ce320a650 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#14 0x00007f1ce320a962 in g_main_loop_run () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#15 0x00007f1ce3effa25 in gtk_main () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
No symbol table info available.
#16 0x0000558be84befff in main ()
No symbol table info available.
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
#1 0x00007f1ce2bee801 in __GI_abort () at abort.c:79
#2 0x00007f1ce3231335 in g_assertion_message () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#3 0x00007f1ce323139a in g_assertion_message_expr () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#4 0x00007f1cbffffa21 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse-mainloop-glib.so.0
#5 0x00007f1ccbb734e5 in pa_pstream_unlink () from /usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecommon-11.1.so
#6 0x00007f1ccbdbe095 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#7 0x00007f1ccbdbe8a0 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#8 0x00007f1ccbdc01e5 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#9 0x00007f1ccbdc16da in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#10 0x00007f1ccbb6dc61 in ?? () from /usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecommon-11.1.so
#11 0x00007f1cbffffec8 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse-mainloop-glib.so.0
#12 0x00007f1ce320a417 in g_main_context_dispatch () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#13 0x00007f1ce320a650 in ?? () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#14 0x00007f1ce320a962 in g_main_loop_run () from /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#15 0x00007f1ce3effa25 in gtk_main () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
#16 0x0000558be84befff in main ()
It seems that a fairly serious problem with chkrootkit
is patched in Debian but not in Mint.
This is a security issue.
I have two computers: the first one is laptop which previously had Linux Mint 18.3 and I upgraded it to Linux Mint 19. The second has fresh Linux Mint 19 install.
The problem is with ALT key in combination "CTRL+ALT+SHIFT". It seems that Linux Mint 19 doesn't recognize ALT key in this combination, even though in Linux Mint 18.3 it used to work perfectly. Some examples: in Linux Mint 19 combination CTRL+ALT+T works fine (opens Terminal), CTRL+ALT+LEFT ARROW (or RIGHT ARROW) works fine (changes workspace), ALT+F4 works fine (closes active window). But combination CTRL+ALT+SHIFT+LEFT ARROW (or RIGHT ARROW) should move active window to another workspace, but it doesn't even though in system there is set a shortcut for that.
I tested it with Intellij which has the ability to check what key combination is pressed. And when I press CTRL+ALT+SHIFT combination, Intellij recognizes it as CTRL+SHIFT without ALT. It also happens when in Linux Mint 19 system settings for shortcuts I try to change any shortcut combination. For example: Keyboard -> Shortcuts -> Windows -> Inter-workspace there is and option to set shortcut for "Move window to workspace 1". If I try to set a shortcut for this action as CTRL+ALT+SHIFT+Num Pad 1, newly assigned shortcut is CTRL+ALT+1. When I try to change shortcut for "Move window to right workspace" and press CTRL+ALT+SHIFT+RIGHT ARROW, newly set shortcut is set as CTRL+SHIFT+RIGHT ARROW.
So basically combination of CTRL+ALT+SHIFT is no longer possible in Linux Mint 19.
Hi :)
beta LM19 cinnamon 64 full level update
the file
/etc/rc.local is unavailable.
the systemd service is available and working..
after create the /etc/rc.local file, the rc.local startup works ...
regards ehtron
mark@mark-Lenovo-V570 ~ $ ls /sys/firmware
acpi dmi efi memmap
mark@mark-Lenovo-V570 ~ $ df -h --local | grep /boot
/dev/sda2 473M 61M 389M 14% /boot
/dev/sda1 511M 3.6M 508M 1% /boot/efi
mark@mark-Lenovo-V570 ~ $ efibootmgr
BootCurrent: 000A
Timeout: 1 seconds
BootOrder: 000A,0005,0006,0007,0004,0009,0008,0003,0002
Boot0000 Setup
Boot0001 Boot Menu
Boot0002* USB FDD:
Boot0003* ATA SSD:
Boot0004* ATA HDD: TOSHIBA MQ01ABD100
Boot0005* ATAPI CD: HL-DT-ST BDDVDRW CP40NG10
Boot0006* USB HDD:
Boot0007* USB CD:
Boot0008* PCI LAN: Realtek PXE B03 D00
Boot0009* Windows Boot Manager
Boot000A* ubuntu
mark@mark-Lenovo-V570 ~ $
My BIOS settings are as follows:
1 Information 1-1 Product Name = Lenovo V570 1-2 BIOS Version = 44CN43WW 1-3 KBC Version = 44EC29WW 1-4 Lenovl SN = WB02836788 1-5 UUID Number = 29E7DDC0-CB7A-11E0-80EC-B2DBD19D08CE 1-6 CPU = Intel Core i5-2430M CPU @ 2.40GHz 1-7 System Memory = 6144 MB 1-8 Hard disk = TOSHIBA MQ01AB - 1000 GB 1-9 ODD = HL-DT-ST BDDVD - ATAPI 2 Configuration 2-1 System Time 2-2 System Date 2-3 USB Legacy = [Disabled] 2-4 Wireless = [Enabled] 2-5 SATA Controller working mode = [AHCI] 2-6 Power Beep = [Disabled] 2-7 Intel Virtual Technology = [Enabled] 3 Security 3-1 Set Supervisor Password 3-2 Set Hard Disk Password 4 Boot 4-1 Boot Priority Order 4-1-1 ubuntu 4-1-2 ATAPI CD = HL-DT-ST BDDVDRW CP40NG10 4-1-3 USB HDD 4-1-4 USB CD 4-1-5 ATA HDD = TOSHIBA MQ01ABD100 4-1-6 Windows Boot Manager 4-1-7 PCI LAN = Realtek PXE B03 D00 4-1-8 ATA SSD 4-1-9 USB FDD
Consequences:
Partition #2 ('/dev/sda2') is unclean (and of course it cannot be fixed while it is mounted).
USB live Mint from ISO via 'mintstick' will not boot.
USB live Mint from ISO via 'unetbootin' does not even appear in boot device list when I boot using F12.
So, I can't rely on the system, and I can't boot a USB live Mint in order to fix partition #2 (while it is unmounted).
Before I shoot myself, I thought I'd stop by here to see if anyone can save my life. Thanks!
Hi,
Could you add reinstall with configuration files to apt implementation. Sometimes we need to easily reset the configuration files that we changed. It would be nice to do it easier.
The following sample command,
apt install --reinstall -o Dpkg::Options::="--force-confask,confnew,confmiss" package.deb
can be implented as follows.
apt install --reinstall-forceconf package.deb
Best regards.
Add journald log rotation size by default, I'm sick of setting it after I've reinstalled the distro and see that 3GB chunk of data. You are a user-friendly distro, you shouldn't omit such fatal flaws that literally freeze a pc to death and leave no option for a novice user to do anything.
apt recommends produces nonsensical output.
(with debug output enabled, missing packages are marked [MISSING]):
$ apt recommends mpv
mpv
youtube-dl [MISSING]
python3-pkg-resources
libarchive13
libacl1
libattr1
libc6
libgcc1
gcc-8-base
libbz2-1.0
liblz4-1
liblzma5
liblzo2-2
multiarch-support
libnettle6
libxml2
libicu60
libstdc++6
zlib1g
libasound2
libasound2-data
libass9
libfontconfig1
libexpat1
libfreetype6
libpng16-16
fontconfig-config
ucf
debconf
perl-base
dpkg
libselinux1
libpcre3
libzstd1
tar
coreutils
sensible-utils
fonts-dejavu-core
fonts-liberation
libfribidi0
libharfbuzz0b
libglib2.0-0
libffi6
libmount1
libblkid1
libuuid1
libgraphite2-3
libavcodec58
libswresample3
libavutil56
libdrm2
libdrm-common
libva-drm2
libva2
libva-x11-2
libx11-6
libxcb1
libxau6
libxdmcp6
libbsd0
libx11-data
libxext6
libxfixes3
libvdpau1
libsoxr0
libgomp1
libcairo2
libpixman-1-0
libxcb-render0
libxcb-shm0
libxrender1
libcodec2-0.8.1
libcrystalhd3
libgsm1
libmp3lame0
libopenjp2-7
libopus0
librsvg2-2
libcroco3
libgdk-pixbuf2.0-0
libjpeg8
libjpeg-turbo8
libtiff5
libjbig0
shared-mime-info
libgdk-pixbuf2.0-common
libpango-1.0-0
fontconfig
libthai0
libthai-data
libdatrie1
libpangocairo-1.0-0
libpangoft2-1.0-0
libshine3
libsnappy1v5
libspeex1
libtheora0
libogg0
libtwolame0
libvorbis0a
libvorbisenc2
libvpx5
libwavpack1
libwebp6
libwebpmux3
libx264-152
libx265-160
libnuma1
libxvidcore4
libzvbi0
libzvbi-common
libavdevice58
libavfilter7
libavformat58
libbluray2
libaacs0 [MISSING]
libgcrypt20
libgpg-error0
libchromaprint1
libavcodec-extra57
libavutil55
libopencore-amrnb0
libopencore-amrwb0
libswresample2
libvo-amrwbenc0
libx265-146
libgme0
libgnutls30
libgmp10
libhogweed4
libidn2-0
libunistring2
libp11-kit0
libtasn1-6
libopenmpt0
libmpg123-0
libvorbisfile3
libssh-gcrypt-4
libgssapi-krb5-2
libk5crypto3
libkrb5support0
libkrb5-3
libkeyutils1
libpostproc55
libswscale5
libbs2b0
libflite1
liblilv-0-0
libserd-0-0
libsord-0-0
libsratom-0-0
libmysofa0
libopencv-core3.2
libtbb2
libopencv-imgproc3.2
librubberband2
libfftw3-double3
libsamplerate0
libzmq5
libnorm1
libpgm-5.2-0
libsodium23
libavc1394-0
libraw1394-11
libcaca0
libncursesw5
libtinfo5
libslang2
libcdio-cdda2
libcdio17
libcdio-paranoia2
libdc1394-22
libusb-1.0-0
libudev1
libgl1
libglvnd0
libglx0
libglx-mesa0
libglapi-mesa
libx11-xcb1
libxcb-dri2-0
libxcb-dri3-0
libxcb-glx0
libxcb-present0
libxcb-sync1
libxdamage1
libxshmfence1
libxxf86vm1
libgl1-mesa-dri
libdrm-amdgpu1
libdrm-intel1
libpciaccess0
libdrm-nouveau2
libdrm-radeon1
libelf1
libllvm6.0
libedit2
libsensors4
libiec61883-0
libjack-jackd2-0
libopenal1
libopenal-data
libsndio6.1
libpulse0
libasyncns0
libdbus-1-3
libsystemd0
libsndfile1
libflac8
libwrap0
libsdl2-2.0-0
libwayland-client0
libwayland-cursor0
libwayland-egl1
libxcursor1
libxi6
libxinerama1
libxkbcommon0
xkb-data
libxrandr2
libxss1
x11-common
lsb-base
libsndio7.0
libxcb-shape0
libxcb-xfixes0
libxv1
libcdio18
libdvdnav4
libdvdread4
libegl1
libegl-mesa0
libgbm1
libwayland-server0
liblcms2-2
liblua5.2-0
libsmbclient
samba-libs
libavahi-client3
libavahi-common3
libavahi-common-data
libcap2
libcups2
libjansson4
libldap-2.4-2
libgssapi3-heimdal
libasn1-8-heimdal
libroken18-heimdal
libhcrypto4-heimdal
libheimbase1-heimdal
libheimntlm0-heimdal
libkrb5-26-heimdal
libhx509-5-heimdal
libwind0-heimdal
libsqlite3-0
libsasl2-2
libsasl2-modules-db
libdb5.3
libldap-common
libldb1
libtalloc2
libtdb1
libtevent0
libpam0g
libaudit1
libaudit-common
libcap-ng0
libpopt0
libpython2.7
libpython2.7-stdlib
libpython2.7-minimal
mime-support
libreadline7
readline-common
install-info
libssl1.1
libwbclient0
python-talloc
libuchardet0
libva-wayland2
libvulkan1
The following missing recommended packages were found for mpv:
libaacs0
youtube-dl
You can install them by typing the following command:
apt install libaacs0 youtube-dl
Of those two, only youtube-dl
is a missing direct recommend:
$ apt show mpv
[...]
Recommends: xdg-utils, youtube-dl (>= 2014.11.26
Direct recommends are the only thing I would want to see as the output of that command.
libaacs0
is a recommendation of the libbluray2
package far down the list. Other recommended packages in the tree are not listed, in particular recommended packages of recommended packages. There is no logic to this limitation. If you go recursive then go fully recursive.
Make default operation non-recursive:
$ apt recommends mpv
The following missing recommended packages were found for mpv:
youtube-dl
You can install them by typing the following command:
apt install youtube-dl
but add a --recursive parameter for a fully recursive output:
$ apt recommends mpv --recursive
The following missing recommended packages were found for mpv:
aria2
libaacs0
libbdplus0
mplayer
phantomjs
python3-pyxattr
rtmpdump
va-driver-all
vdpau-driver-all
youtube-dl
You can install them by typing the following command:
apt install aria2 libaacs0 libbdplus0 mplayer phantomjs python3-pyxattr rtmpdump va-driver-all vdpau-driver-all youtube-dl
* Cinnamon version 3.6.6
* Distribution - (Mint 17.2, Arch, Fedora 25, etc...)
* Sony Vaio VGN-FZ430E
* 64 bit
Issue
/dev/video0 is not present. Its the laptops webcam
Steps to reproduce
Install mint os from live usb stick, restart, /dev/video0 not there.
Start mint os from live usb stick, /dev/video0 is there and camera works.
Expected behaviour
For /dev/video0 to be there for the installed mint os
Other information
Hi
I know that i can install steam from software manager but i should can install steam from official website, normally, like on windows (It is important for new users).
I have laptop with Radeon HD 8550M. I have error on linux kernel 4.4.x and 4.8.x.
Running Steam on linuxmint 18.1 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(0)
libGL error: unable to load driver: radeonsi_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: radeonsi
libGL error: unable to load driver: swrast_dri.so
libGL error: failed to load driver: swrast
When i installed steam from software manager all was ok but why steam not work when i install official client from steam webiste?
binary apt has a showsrc command, the wrapper does not. Needs to be added to the command list for apt in
https://github.com/linuxmint/mintsystem/blob/master/usr/local/bin/apt#L86
Description as per apt-cache:
showsrc - Show source records
When I tring to add a ppa I get the following error message Linux mint 18.1:
sudo add-apt-repository ppa:nilarimogard/webupd8
Traceback (most recent call last):
File "/usr/lib/linuxmint/mintSources/mintSources.py", line 1547, in
codename = config_parser.get("general", "base_codename")
File "/usr/lib/python2.7/ConfigParser.py", line 330, in get
raise NoSectionError(section)
ConfigParser.NoSectionError: No section: 'general'
After installing Linux Mint 17.3 bêta, I saw that swap partition is in a logical partition, alone in an extended partition.
Putting the swap partition at the end of the disk is a good idea because it's easiest to move the swap partition after cloning by example. But why not only create a primary partition for swap ? It would be perfect.
Hi,
Make an executable script owned by root and drop it in /etc/cron.hourly.
#!/bin/sh
apt update && apt dist-upgrade -y
It fails when run by the system crontab with 17 * * * * root cd / && run-parts --report /etc/cron.hourly
However running it manually via sudo run-parts --report /etc/cron.hourly
from the terminal works fine.
Also running apt update && apt dist-upgrade -y
from a root crontab set up with sudo crontab -e
works fine.
Why the difference? Does the script fail to identify the user as root when run by the system crontab?
Behaviour observed on Mint 18.3
Missing activity status (hang during boot?)
The boot process appears to hang with no status to the user.
After reading this:
'http://askubuntu.com/questions/435066/how-to-skip-boot-time-fsck-check-preferably-by-editing-grub-menu-entry'
"...the default should be to check once every 30 boots." – terdonhttp://askubuntu.com/users/85695/terdon Mar 19 '14 at 0:29
I believe the situation may be that an extended file system check is in progress...
But the user is not informed of it <-- This is a design flaw that should be fixed.
Impact: I have been turning my system off, then back on and taking the default boot option in grub. I understand now that doing so is not wise. But what choice do I have when the boot appears to hang?
I have a WD My Passport Ultra external hard drive. When I plug
it in to the PC, immediately a read-only "WD Unlocker"
device/drive is mounted (this is normal, it is used under
Windows or Mac to provide an app to decrypt and mount the real drive).
But then if I umount that drive and try to eject it, eject gives
an error. I get the same error (via a dialog) if I use nemo to
eject the drive.
I'm using latest Mint 19 Cinnamon.
[Plug in the drive]
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
...
/dev/sr1 13212 13212 0 100% /media/user1/WD Unlocker15
$ mount
...
/dev/sr1 on /media/user1/WD Unlocker15 type udf (ro,nosuid,nodev,relatime,uid=1000,gid=1000,iocharset=utf8,uhelper=udisks2)
$ umount /dev/sr1
$
[Drive no longer appears in mount or df]
$ eject -v /dev/sr1
eject: device name is `/dev/sr1'
eject: expanded name is `/dev/sr1'
eject: `/dev/sr1' is not mounted
eject: `/dev/sr1' is not a mount point
eject: `/dev/sr1' is not a multipartition device
eject: trying to eject `/dev/sr1' using CD-ROM eject command
eject: CD-ROM eject command failed
eject: trying to eject `/dev/sr1' using SCSI commands
eject: SCSI eject failed
eject: trying to eject `/dev/sr1' using floppy eject command
eject: floppy eject command failed
eject: trying to eject `/dev/sr1' using tape offline command
eject: tape offline command failed
eject: unable to eject, last error: Invalid argument
$ eject -v /dev/nosuchdevice
eject: device name is `/dev/nosuchdevice'
eject: unable to find or open device for: `/dev/nosuchdevice'
$ eject -h
Eject version 2.1.5 by Jeff Tranter ([email protected])
...
First: apologies if this is the wrong place, within Mint's bugtrackers, to report the bug; I found it non-obvious where I should report it.
Next: Debian rejected the bug report that follows, on the basis that Debian has fixed the bug and thus, if it it persists in Mint, it is Mint's fault.
The problem is as reported in my title and as reported in this three-year old (NB!) Debian bug report: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=718232
I have Mint 18.1 x64 Cinnamon.
with the help of Thee Mahn (Ultimate EDition project leader) and a Canadian friend, I have created and updated this plymouth theme for Linux Mint http://gnome-look.org/content/show.php/aurora-borealis%3A+Linux+Mint+bootsplash?content=163634
demo here https://www.youtube.com/watch?v=uOAr1IRC3sA&feature=youtu.be
I want your feedback on whether it can be a Linux Mint default bootsplash
One of the error messages from binary apt:
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).
That command works fine with binary apt, but it won't work on Mint because the apt script currently cannot handle the reversed argument order, it is hardcoded to look for the command only in the first argument:
https://github.com/linuxmint/mintsystem/blob/master/usr/local/bin/apt#L80
Suggest to instead check all arguments for a known command, use the rest as options.
Xplayer crashes. Every time.
Bash completion doesn't work with all apt commands.
In my testing with LM 19, "full-upgrade" and "list" didn't autocomplete and possibly others as well.
I would love to see something like:
http://jancborchardt.net/slides/owncloud-gnome.html
also for Mint.
How can this be done?
Debian packages shouldn't install files directly into the /usr/local
prefix. Just move the scripts to /usr/bin
, as long as they don't conflict with other packages. If they do, like in case of apt
, move them to /usr/lib/linuxmint/mintSystem/
and install shortcuts in /usr/local/bin
with a maintainer script.
edit:
The commands highlight
and search
are provided in the packages highlight and sphinxsearch. Should they really be overridden with the commands in the mintsystem package?
And maybe /usr/bin/xchat-systray
should be removed since xchat isn't pre-installed on Mint anymore.
I'm filing this here because I don't know where else to file it, I am afraid.
After an in-place upgrade from Mint 18.3 to 19, my M720 Triathlon Multi-Device Mouse, connected via USB receiver, can't pair properly with my ThinkPad. Admittedly, under Mint 18.3 the pairing would struggle for a while after the USB receiver had been removed and reinserted, but, now (in Mint 19), the pairing won't establish - more than intermittently, for a few seconds at a time - at all. Still, the mouse's battery status does now (unlike in 18.3) appear in the Settings window.
I am using kernel 4.17.3-041703-generic, with so-called zero-day Linux firmware.
Writing log file to: "/home/proulxf012/.stellarium/log.txt"
File search paths:
0 . "/home/proulxf012/.stellarium"
1 . "/usr/share/stellarium"
Config file "/home/proulxf012/.stellarium/config.ini" does not exist. Copying the default file.
Config file is: "/home/proulxf012/.stellarium/config.ini"
Default surface format: QSurfaceFormat(version 2.0, options QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1, redBufferSize -1, greenBufferSize -1, blueBufferSize -1, alphaBufferSize -1, stencilBufferSize -1, samples -1, swapBehavior QSurfaceFormat::SwapBehavior(DefaultSwapBehavior), swapInterval 1, profile QSurfaceFormat::OpenGLContextProfile(NoProfile))
Desired surface format: QSurfaceFormat(version 2.1, options QFlagsQSurfaceFormat::FormatOption(), depthBufferSize 24, redBufferSize 8, greenBufferSize 8, blueBufferSize 8, alphaBufferSize 8, stencilBufferSize 8, samples -1, swapBehavior QSurfaceFormat::SwapBehavior(DefaultSwapBehavior), swapInterval 1, profile QSurfaceFormat::OpenGLContextProfile(NoProfile))
StelGLWidget constructor
StelGraphicsScene constructor
initializeGL
OpenGL supported version: "2.1 Mesa 18.0.5"
Current Format: QSurfaceFormat(version 2.1, options QFlagsQSurfaceFormat::FormatOption(DeprecatedFunctions), depthBufferSize 24, redBufferSize 8, greenBufferSize 8, blueBufferSize 8, alphaBufferSize 8, stencilBufferSize 8, samples 0, swapBehavior QSurfaceFormat::SwapBehavior(DefaultSwapBehavior), swapInterval 1, profile QSurfaceFormat::OpenGLContextProfile(NoProfile))
StelMainView::init
Detected: OpenGL "2.1"
Driver version string: "2.1 Mesa 18.0.5"
GL vendor is "Intel Open Source Technology Center"
GL renderer is "Mesa DRI Intel(R) Ironlake Mobile "
GL Shading Language version is "1.20"
MESA Version Number detected: 18
Mesa version is fine, we should not see a graphics problem.
GLSL Version Number detected: 1.2
This is not enough: we need GLSL1.30 or later.
You should update graphics drivers or graphics hardware.
Else, please try to use an older version like 0.12.9, and try there with --safe-mode
You can try to run in an unsupported degraded mode by ignoring the warning and continuing.
But more than likely problems will persist.
Erreur de segmentation (core dumped)
Notice that stellarium works alright from Ubuntu 18.04 (3 flavors tried) but still with the initial warning about a problem (unspecified) about my laptop openGL installation. Program starts without problems and I had no other warnings about it.
I do not see why it would not work with my preferred distro.
François Proulx, Longueuil, Québec, Canada
Laptop: Zareason 1454 (MSI MS-1454)
Intel i3 1st gen + intel video controller
4G ram + 320G HDD
Linux Mint 19 Cinnamon
I don't understand why mintsystem depends on the package cowsay...
For an experiment on the APT lock file,I needed a package to remove and install. I usually use cowsay because it seems so unimportant. However, it removed a bunch of system packages, too.
Using APT's log file, I managed to reinstall those packages, but I don't understand why this needed to happen. Is there any good reason for mintsystem depending on cowsay? If not, please remove it.
APT log:
Start-Date: 2014-12-31 13:09:49
Commandline: apt-get remove cowsay
Remove: mint-artwork-gnome:amd64 (2.6.36), mint-meta-cinnamon:amd64 (2014.12.09), mint-meta-core:amd64 (2014.12.09), cowsay:amd64 (3.03+dfsg1-6), mint-artwork-common:amd64 (1.8.4), mintsystem:amd64 (7.9.7), ubuntu-system-adjustments:amd64 (2014.11.19)
End-Date: 2014-12-31 13:10:13
PS: Also mint-meta-core depends on cowsay separately, additionally to mintsystem.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.