wolfssh
wolfSSL's Embeddable SSH Server
dependencies
wolfSSH is dependent on wolfCrypt. The simplest configuration of wolfSSL required for wolfSSH is the default build.
$ cd wolfssl
$ ./configure [OPTIONS] --enable-ssh
$ make check
$ sudo make install
To use the key generation function in wolfSSH, wolfSSL will need to be
configured with keygen: --enable-keygen
.
If the bulk of wolfSSL code isn't desired, wolfSSL can be configured with
the crypto only option: --enable-cryptonly
.
building
From the source directory run:
$ ./autogen.sh
$ ./configure
$ make
$ make check
The autogen.sh
script only has to be run the first time after cloning the
repository. If you have already run it or are using code from a source
archive, you should skip it.
For building under Windows with Visual Studio, see the file "ide/winvs/README.md".
NOTE: On resource constrained devices the DEFAULT_WINDOW_SZ may need to be set to a lower size. It can also be increased in desktop use cases to help with large file transfers. By default channels are set to handle 16,384 bytes of data being sent and received. An example of setting a window size for new channels would be as follows "./configure CPPFLAGS=-DDEFAULT_WINDOW_SZ=16384"
examples
The directory examples
contains an echoserver that any client should be able
to connect to. From the terminal run:
$ ./examples/echoserver/echoserver
From another terminal run:
$ ssh_client localhost -p 22222
The server will send a canned banner to the client:
wolfSSH Example Echo Server
Characters typed into the client will be echoed to the screen by the server. If the characters are echoed twice, the client has local echo enabled. The echo server isn't being a proper terminal so the CR/LF translation will not work as expected.
testing notes
After cloning the repository, be sure to make the testing private keys read- only for the user, otherwise ssh_client will tell you to do it.
$ chmod 0600 ./keys/gretel-key-rsa.pem ./keys/hansel-key-rsa.pem \
./keys/gretel-key-ecc.pem ./keys/hansel-key-ecc.pem
Authentication against the example echoserver can be done with a password or public key. To use a password the command line:
$ ssh_client -p 22222 USER@localhost
Where the USER
and password pairs are:
jill:upthehill
jack:fetchapail
To use public key authentication use the command line:
$ ssh_client -i ./keys/key-USER.pem -p 22222 USER@localhost
Where the user can be gretel
or hansel
.
scp support
wolfSSH includes server-side support for scp, which includes support for both copying files 'to' the server, and copying files 'from' the server. Both single file and recursive directory copy are supported with the default send and receive callbacks.
To compile wolfSSH with scp support, use the --enable-scp
build option
or define WOLFSSL_SCP
:
$ ./configure --enable-scp
$ make
For full API usage and implementation details, please see the wolfSSH User Manual.
The wolfSSL example server has been set up to accept a single scp request, and is compiled by default when compiling the wolfSSH library. To start the example server, run:
$ ./examples/server/server
Standard scp commands can be used on the client side. The following are a
few examples, where scp
represents the ssh client you are using.
To copy a single file TO the server, using the default example user "jill":
$ scp -P 22222 <local_file> [email protected]:<remote_path>
To copy the same single file TO the server, but with timestamp and in verbose mode:
$ scp -v -p -P 22222 <local_file> [email protected]:<remote_path>
To recursively copy a directory TO the server:
$ scp -P 22222 -r <local_dir> [email protected]:<remote_dir>
To copy a single file FROM the server to the local client:
$ scp -P 22222 [email protected]:<remote_file> <local_path>
To recursively copy a directory FROM the server to the local client:
$ scp -P 22222 -r [email protected]:<remote_dir> <local_path>
port forwarding support
wolfSSH provides client side support for port forwarding. This allows the user to set up an encrypted tunnel to another server, where the SSH client listens on a socket and forwards connections on that socket to another socket on the server.
To compile wolfSSH with port forwarding support, use the --enable-fwd
build
option or define WOLFSSH_FWD
:
$ ./configure --enable-fwd
$ make
For full API usage and implementation details, please see the wolfSSH User Manual.
The portfwd example tool will create a "direct-tcpip" style channel. These directions assume you have OpenSSH's server running in the background with port forwarding enabled. This example forwards the port for the wolfSSL client to the server as the application. It assumes that all programs are run on the same machine in different terminals.
src/wolfssl$ ./examples/server/server
src/wolfssh$ ./examples/portfwd/portfwd -p 22 -u <username> \
-f 12345 -t 11111
src/wolfssl$ ./examples/client/client -p 12345
By default, the wolfSSL server listens on port 11111. The client is set to try to connect to port 12345. The portfwd logs in as user "username", opens a listener on port 12345 and connects to the server on port 11111. Packets are routed back and forth between the client and server. "Hello, wolfSSL!"
The source for portfwd provides an example on how to set up and use the port forwarding support in wolfSSH.
sftp support
wolfSSH provides server and client side support for SFTP version 3. This allows the user to set up an encrypted connection for managing file systems.
To compile wolfSSH with SFTP support, use the --enable-sftp
build option or
define WOLFSSH_SFTP
:
$ ./configure --enable-sftp
$ make
For full API usage and implementation details, please see the wolfSSH User Manual.
The SFTP client created is located in the directory examples/sftpclient/ and the server is ran using the same echoserver as with wolfSSH.
src/wolfssh$ ./examples/sftpclient/wolfsftp
A full list of supported commands can be seen with typeing "help" after a connection.
wolfSSH sftp> help
Commands :
cd <string> change directory
chmod <mode> <path> change mode
get <remote file> <local file> pulls file(s) from server
ls list current directory
mkdir <dir name> creates new directory on server
put <local file> <remote file> push file(s) to server
pwd list current path
quit exit
rename <old> <new> renames remote file
reget <remote file> <local file> resume pulling file
reput <remote file> <local file> resume pushing file
<crtl + c> interrupt get/put cmd
An example of connecting to another system would be
src/wolfssh$ ./examples/sftpclient/wolfsftp -p 22 -u user -h 192.168.1.111