litti/dccu2

dccu2's Issues

Supported Hardware

I wonder what hardware I'd need to run dccu on a QNAP NAS?
HmIP-RFUSB only seems to support HmIP. Is there hardware available that supports Homematic and Homematic IP?

Sources for Docker image litti/debian-stretch-for-ccu2

Where can I find the sources for the mentioned image?
It seems that parts of the OCCU SDK is included in the mentioned image already,

Changes to rfd.conf not saved

I want to add an Interface to rfd.conf, but every tim I start the docker container the changes are overwritten with the original file created the first time I started dccu2 without any interface section in it. What could I do?

AddOns

The readme says: "installation of specially prepared AddIns".

What does specially prepared mean?
I tried a x86 version of CuxD but after pressing install just nothing happens.

homegear as a gateway

Would love to use homegear as a gateway für dccu2.

FW update needed?

Hello,
I just installed container and it runs like hell. Tried to get it work with HM LAN gateway but status stays empty even though IP is entered correct and ping from inside container
docker exec -it dccu2-x86_64 /bin/bash
->
PING 192.168.11.28 (192.168.11.28): 56 data bytes 64 bytes from 192.168.11.28: icmp_seq=0 ttl=63 time=0.374 ms 64 bytes from 192.168.11.28: icmp_seq=1 ttl=63 time=0.423 ms 64 bytes from 192.168.11.28: icmp_seq=2 ttl=63 time=0.437 ms 64 bytes from 192.168.11.28: icmp_seq=3 ttl=63 time=0.414 ms 64 bytes from 192.168.11.28: icmp_seq=4 ttl=63 time=0.440 ms 64 bytes from 192.168.11.28: icmp_seq=5 ttl=63 time=0.460 ms 64 bytes from 192.168.11.28: icmp_seq=6 ttl=63 time=0.397 ms 64 bytes from 192.168.11.28: icmp_seq=7 ttl=63 time=0.413 ms ^C--- 192.168.11.28 ping statistics --- 8 packets transmitted, 8 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.374/0.420/0.460/0.025 ms
works.
Is it possible that FW versions don't match?
GW has newer 2.49.18 and DCCU2 the very old 2.29.23.20171216

Would be fantastic if updates where possible or an image with a newer FW version would be available.

Best regards
Klaus

is this project alive?

hey @litti, I love your project, but is it still alive? :)