Giter Site home page Giter Site logo

lupi's Introduction

LuPi

Introduction

LuPi is an embedded OS for ARM hardware, that deliberately does not do a lot of stuff. It is an experiment on how far you can push a few concepts before it all falls apart. These concepts are, roughly:

  • The kernel should contain only functionality which cannot be implemented user-side.
  • Kernel simplicity is more important than maximum functionality.
  • User-side code should only be in C if it cannot be implemented in Lua.
  • Everything else should be written in Lua.

Further to those concepts, it is a microkernel architecture that (currently) only runs on the Raspberry Pi and the TiLDA MKe. There is no x86 support, no device tree or dynamic libraries or any kind, no paging (swap memory), and no file system. And definitely no POSIX support or fork/exec.

Project layout

bin/        - Where final binaries are built to
build/      - One subdirectory per build target
  build.lua - The main build script
  tilda/    - all project files specific to the TiLDA hardware
  pi/       - All Pi 1 and 2 specific files
  pi3/      - In progress, non-functional Pi 3 AARCH64 support
k/          - All the kernel code
lua/        - The code comprising the Lua runtime
modules/    - Lua modules and 'apps'
testing/    - Various junky bits of temporary test code
userinc/    - Headers for presenting a vaguely C-like environment for
              building Lua
usersrc/    - Cut-down implementations of the subset of std C required to
              build Lua

Build process

LuPi is built using a custom Lua script, build.lua. There are a couple of different build targets which correspond to config files build/<target>/buildconfig.lua. Intermediate object files are located at bin/obj-<target>/ and build products at bin/<target>/.

For syntax, see build.lua syntax.

Targets are built in the order specified on the command line, so if you specify clean, it should be first. Eg:

./build/build.lua -m clean luac pi

The command-line parsing also supports combining short options together, so the following are all equivalent:

./build/build.lua -i -m -j 64 pi
./build/build.lua -im -j64 pi
./build/build.lua -imj 64 pi
./build/build.lua -imj64 pi

Incremental builds are enabled by specifying the -i or --incremental command-line options. When enabled, the build will output an additional file bin/obj-<target>/dependencyCache.lua. This file contains information about the dependencies of all the object files as well as the command-line used to create them. If the next build also enables the incremental option, this file is loaded and a file is only recompiled if it or any of its dependencies have changed since the last build (ie if the last modified date of any of the sources is more recent than that of the object file). Sources are also rebuilt if the command line used to build them has changed (for example, due to a different bootMode being specified). A non-incremental build will not calculate the dependencies and will delete dependencyCache.lua if it exists.

The system requirements for running build.lua are:

  • Lua 5.3 must be on your PATH, and must support io.popen().
  • For pi builds, arm-none-eabi-gcc must be on your PATH, and must support gcc 4.x syntax.
  • The default system shell must support find -path, mkdir -p, rm.
  • To support incremental builds, the shell must also support xargs, stat -f "%m %N" and find -prune.

Building the code - Tilda

From the main directory, run build.lua - see the build process section for more info, but these are the usual options. We first clean all and build luac which is required by the use of the -m option.

./build/build.lua clean doc luac
./build/build.lua -limj64 tilda --bootmode 6

This creates a kernel.img in bin/tilda/kernel.img. This must be flashed onto the device using bossac. I extracted this from my Arduino IDE installation but it looks like it can be also be downloaded from https://sourceforge.net/projects/b-o-s-s-a/.

First you'll need to put the board into flash mode by shorting the "Erase" pins while pressing the "Reset" button. Then plug in the USB cable and the device should enumerate (on OS X) as /dev/cu.usbmodemNNNN. Flash the image using:

bossac -i --port=/dev/cu.usbmodem1411 -U true -e -w -b bin/tilda/kernel.img -R

Once flashing is complete, power cycle the board and it should boot into the GUI boot menu.

Internal details

For more details about the kernel design, see here.

License

Except as noted below, this software is © 2014-2016 Tom Sutcliffe.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

markdown.lua

markdown.lua is Copyright © 2008 Niklas Frykholm.

Lua

Lua is Copyright © 1994–2016 Lua.org, PUC-Rio.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

malloc.c

This is a version (aka dlmalloc) of malloc/free/realloc written by Doug Lea and released to the public domain, as explained at http://creativecommons.org/publicdomain/zero/1.0/

memcmp_arm.S, memcpy_arm.S

Copyright (C) 2008 The Android Open Source Project

All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:

 * Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
 * Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in
   the documentation and/or other materials provided with the
   distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.

memcmp_thumb2.s, memcpy_thumb2.s

Copyright (c) 2009 Apple Inc. All rights reserved.

@APPLE_LICENSE_HEADER_START@

This file contains Original Code and/or Modifications of Original Code
as defined in and that are subject to the Apple Public Source License
Version 2.0 (the 'License'). You may not use this file except in
compliance with the License. Please obtain a copy of the License at
http://www.opensource.apple.com/apsl/ and read it before using this
file.

The Original Code and all software distributed under the License are
distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
Please see the License for the specific language governing rights and
limitations under the License.

@APPLE_LICENSE_HEADER_END@

lupi's People

Contributors

tomsci avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.