liyistc/cleansync

Automatically exported from code.google.com/p/cleansync

cleansync's Issues

Object Reference Not Set to An Instance of An Object

When two files are deleted and one file is updated, the system cannot sync
them. In fact, it will show an exception message box. If you insists to
sync again, then the system will be not responding and crashed.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:41

Allowing user to set USB path on the computer hard disk

Users are currently allowed to set the USB path on the computer Hard Disk
currently. There is no checking to prevent users from doing so. It will
forever be an incomplete job and the USB meta-data not be detected next
time the program starts up, causing a dead job.

Original issue reported on code.google.com by shiokamania on 15 Mar 2010 at 8:35

Allow users to rename a job after creating it

Suggestion: Allow users to rename a job after creating it. Currently, the
only option is to delete the job and create it again with a different name.

Original issue reported on code.google.com by [email protected] on 6 May 2010 at 11:31

Removing of usb during synchronization causes the program to crash

No handling of such a problem

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:55

Drive Access (Windows Vista)

I do the following actions: (1) Edit file.txt; (2) Sync the folder; (3)
Edit file.txt; (4) Sync the folder; (5) Edit the file.txt again; (6) Sync
the folder; (7) The system suddenly tells me that I cannot access
Backupm1.temp on my thumb drive.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:40

When first sync failed due to not enough disc space, further first sync on this job will fail with not enough disc space error.

Incorrect message, due to old error message persist as the job name is
already saved.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 8:40

Cannot perform subsequent sync after first sync until the job is paired with another computer

Program shows message 'Not fully setup' after sync. Cannot perform sync
subsequently. This applies to various Windows versions and local/removable
drives.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:36

Not able to save path for Task

Unable to save destination path for Task.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:48

Pressing browse will remove the last folder path selected

When pressing the browse folder for the second time, and cancel, the
original path is removed.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 8:41

Invalid Job Names

Invalid job names are yet to be handled. E.g, duplicate job names, USB
plugging in with duplicate job names, etc.

Original issue reported on code.google.com by shiokamania on 27 Mar 2010 at 5:32

Buttons not in use are not disabled

Buttons such as analysis and sync are not disabled when no job is selected.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:37

Bug: The upper case and lower case situation

Add two empty folders X and Y in uppper case in folder A, after the sync,
two folders x and y in lower case are added to folder B.

Original issue reported on code.google.com by [email protected] on 10 May 2010 at 9:31

Bug: The support for two ways sync and even n ways sync

Essentially, the program also support the one way sync, it always update
the intermediate buffer on the stick memory with the folder on the local
machine.

Original issue reported on code.google.com by [email protected] on 10 May 2010 at 9:30

Start sync button does not work at the main window

Nothing happens when start sync button is clicked. Apparently, sync can
only be done when user clicks on analyze button then click start sync
button at the analysis window.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:33

Changing drive letter of local path doesn't show error message of path not found

Put the local path to removable media, and change the drive of the
removable media. Only removable path will be changed, no path not found
(which should be thrown) exception shown to user.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 8:38

Need to click on the "Analyze" before clicking start sync

Need to click on the "Analyze" before start sync. The start sync button
beside analyze is not functioning

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:51

Deleting session

At the end of the session, the user may have a lot of jobs in the main
window. If the user have hundreds of jobs created, it will be tedious if
the user has to delete the job one by one. A checkbox to let the user to
indicate which job he/she wants to delete

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:56

Removable Path not showing up

After I have created a task, the files are copied over, as well as some
extra information, but within CleanSync, the Removable Path is not defined
(when I click on the job on the left, only "JobName" and "Local Path" is
defined. The "Remote Path" and "Removable Path" fields say "Not Fully Setup".

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:50

Disable buttons when they are not in use

[Non-critical] The first time I run CleanSync, 4 buttons appeared at the
bottom of the UI, but only 1 of them is clickable. Perhaps the other 3
buttons can be disabled to indicate to the user that they are not in use.
Otherwise when I click any of the 3 buttons, I do not get any response
either. Analyse button does not seem to work.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 8:45

Unauthorized access exception during synchronization

What steps will reproduce the problem?
1. Unauthorized access exception during synchronization happens for
folders. At different times, it occurs at different areads. Happens usually
during accepting job synchronization

Original issue reported on code.google.com by shiokamania on 27 Mar 2010 at 5:36

Bug: The issue about renaming

 Actually, it does not support rename.

Original issue reported on code.google.com by [email protected] on 10 May 2010 at 9:30

The software hangs and shows an error when a large folder on a computer is "first synced" with the folder on ED.

The software hangs and shows an error when a large folder on a computer is
"first synced" with the folder on ED. I guess the background worker or a
separate thread is not used for synchronization.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:49

Deleting Job which has not been accepted by any other computer will not delete the folder in portable media.

This should delete as the user may want to cancel the whole thing or at
least give a message box.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 8:43

Does not check for Task conflict

When there is an existing task "T1", if user create a new task "T1", the
program does not warn user for task name conflicts, and the program will
crash if user sync the new "T1" with different path input as old "T1".

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:42

if there is only one external drive detected, select it by default

During job creation, if there is only one external drive detected, select
it by default rather than requiring the user to click it.

Original issue reported on code.google.com by [email protected] on 6 May 2010 at 11:30

ogram allows the folder path on the left and right textbox in 'Create job' mode to be similar

[Critical] As per issue summary

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 8:47

Metadata folder created by program is too invisible

A folder called _cs_job_data is created on the folder containing the
program executable file and the root drive of the source/destination folder.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:31

Conflict Handling

The user can actually choose both versions to keep but the system only keep
one of them.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:37

File conflicts

Unable to detect file/folder conflicts of the same name.

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 7:47

Allow to sync with its subfolder

No checking of folder dependency (it syncs with sub-folder, even if both
are in portable media)

Original issue reported on code.google.com by shiokamania on 30 Mar 2010 at 8:34

Allow '.' in job name

consider allowing '.' in job names. It is not allowed in 2.0.

Original issue reported on code.google.com by [email protected] on 6 May 2010 at 10:55