lockfale/cc13

CarolinaCon13 Badge Jank

cc13's Issues

Some upload script environment user interface issues

Small issues:

• Input does not appear until enter is pressed. It would be nice to see what is typed in case there is an error that needs reviewing, or I change my mind.
• It may help if menus appeared upon entering, and not just the help message, maybe every time an action completes.
• After a small delay, maybe 5 seconds, at least on my platform, I receive the message Thanks for using SerialUI! Goodbye.. Of course the program runs in sort of a loop, but the current state is lost, which is annoying, and I did not want to exit yet. I understand if this phenomenon is not completely under this project's control, but would appreciate any help in determining why it is happening.

Upon starting the monitor part of the Makefile:

~/P/C/badge (master ⚡→↩☡=) make monitor
<Arduino environment header>
<terminal clear>
Transmitting at 915 Mhz...
RFM69_ATC Enabled (Auto Transmission Control)

It will stay like this until key press.
Then this will appear:

+++ Welcome to CarolinaCon 13 +++
Enter '?' for options.
>

The input you type will not appear until you press Enter.
Then it will look like this:

+++ Welcome to CarolinaCon 13 +++
Enter '?' for options.
> ?
*** Help for: TOP

        + schedule            Print the schedule
        + flashy              Flashy flashy
        + radio               Radio Properties

        * quit                Exit SerialUI
        * ?                   List available menu items
>

More examples:

> radio
radio
radio>

> radio
radio
radio> ?
*** Help for: radio

        * temp                Print Radio Temperature

        * ..                  Move up to parent menu
        * ?                   List available menu items
radio>
<delay of several seconds>
Thanks for using SerialUI! Goodbye.

Note no input was typed or sent, and the sudden disconnection occurred.

Board doesn't do light pattern or communicate after flashing eeprom

What did I do wrong? The badge doesn't do anything when I reset it.

-------------------------
Arduino.mk Configuration:
- [AUTODETECTED]       CURRENT_OS = LINUX 
- [USER]               ARDUINO_DIR = /usr/local/arduino 
- [USER]               ARDMK_DIR = /home/surge/workspace/CC13/Arduino-Makefile 
- [AUTODETECTED]       ARDUINO_VERSION = 182 
- [DEFAULT]            ARCHITECTURE = avr 
- [DEFAULT]            ARDMK_VENDOR = arduino 
- [AUTODETECTED]       ARDUINO_PREFERENCES_PATH = /home/surge/.arduino15/preferences.txt 
- [AUTODETECTED]       ARDUINO_SKETCHBOOK = /home/surge/Arduino (from arduino preferences file)
- [BUNDLED]            AVR_TOOLS_DIR = /usr/local/arduino/hardware/tools/avr (in Arduino distribution)
- [COMPUTED]           ARDUINO_LIB_PATH = /usr/local/arduino/libraries (from ARDUINO_DIR)
- [COMPUTED]           ARDUINO_PLATFORM_LIB_PATH = /usr/local/arduino/hardware/arduino/avr/libraries (from ARDUINO_DIR)
- [COMPUTED]           ARDUINO_VAR_PATH = /usr/local/arduino/hardware/arduino/avr/variants (from ARDUINO_DIR)
- [COMPUTED]           BOARDS_TXT = /usr/local/arduino/hardware/arduino/avr/boards.txt (from ARDUINO_DIR)
- [USER]               USER_LIB_PATH = /home/surge/workspace/CC13/libraries 
- [DEFAULT]            PRE_BUILD_HOOK = pre-build-hook.sh 
- [USER]               BOARD_SUB = atmega328 
- [USER]               BOARD_TAG = diecimila 
- [COMPUTED]           CORE = arduino (from build.core)
- [COMPUTED]           VARIANT = standard (from build.variant)
- [COMPUTED]           OBJDIR = build-diecimila-atmega328 (from BOARD_TAG)
- [COMPUTED]           ARDUINO_CORE_PATH = /usr/local/arduino/hardware/arduino/avr/cores/arduino (from ARDUINO_DIR, BOARD_TAG and boards.txt)
- [USER]               MONITOR_BAUDRATE = 115200 
- [DEFAULT]            OPTIMIZATION_LEVEL = s 
- [DEFAULT]            MCU_FLAG_NAME = mmcu 
- [DEFAULT]            CFLAGS_STD = -std=gnu11 -flto -fno-fat-lto-objects 
- [DEFAULT]            CXXFLAGS_STD = -std=gnu++11 -fno-threadsafe-statics -flto 
- [COMPUTED]           DEVICE_PATH = /dev/ttyUSB0 (from MONITOR_PORT)
- [DEFAULT]            FORCE_MONITOR_PORT =  
- [AUTODETECTED]       Size utility: AVR-aware for enhanced output
-
-                      ARDUINO_LIBS =
- [USER]                 EEPROMex
- [USER]                 RFM69
- [USER]                 SPIFlash
- [USER]                 SerialUI
- [PLATFORM]             SPI
- [COMPUTED]           BOOTLOADER_PARENT = /usr/local/arduino/hardware/arduino/avr/bootloaders (from ARDUINO_DIR)
- [COMPUTED]           ARDMK_VERSION = 1.5 
- [COMPUTED]           CC_VERSION = 4.9.2 (avr-gcc)
-------------------------
mkdir -p build-diecimila-atmega328
/usr/local/arduino/hardware/tools/avr/bin/avrdude -q -V -p atmega328p -C /usr/local/arduino/hardware/tools/avr/etc/avrdude.conf -D -c arduino -b 57600 -P /dev/ttyUSB0 \
		-U eeprom:w:build-diecimila-atmega328/badge.eep:i

avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: reading input file "build-diecimila-atmega328/badge.eep"
avrdude: writing eeprom (0 bytes):
avrdude: 0 bytes of eeprom written

avrdude: safemode: Fuses OK (E:00, H:00, L:00)

avrdude done.  Thank you.

surge@Kirabi:~/workspace/CC13/badge$ sudo make do_upload
-------------------------
Arduino.mk Configuration:
- [AUTODETECTED]       CURRENT_OS = LINUX 
- [USER]               ARDUINO_DIR = /usr/local/arduino 
- [USER]               ARDMK_DIR = /home/surge/workspace/CC13/Arduino-Makefile 
- [AUTODETECTED]       ARDUINO_VERSION = 182 
- [DEFAULT]            ARCHITECTURE = avr 
- [DEFAULT]            ARDMK_VENDOR = arduino 
- [AUTODETECTED]       ARDUINO_PREFERENCES_PATH = /home/surge/.arduino15/preferences.txt 
- [AUTODETECTED]       ARDUINO_SKETCHBOOK = /home/surge/Arduino (from arduino preferences file)
- [BUNDLED]            AVR_TOOLS_DIR = /usr/local/arduino/hardware/tools/avr (in Arduino distribution)
- [COMPUTED]           ARDUINO_LIB_PATH = /usr/local/arduino/libraries (from ARDUINO_DIR)
- [COMPUTED]           ARDUINO_PLATFORM_LIB_PATH = /usr/local/arduino/hardware/arduino/avr/libraries (from ARDUINO_DIR)
- [COMPUTED]           ARDUINO_VAR_PATH = /usr/local/arduino/hardware/arduino/avr/variants (from ARDUINO_DIR)
- [COMPUTED]           BOARDS_TXT = /usr/local/arduino/hardware/arduino/avr/boards.txt (from ARDUINO_DIR)
- [USER]               USER_LIB_PATH = /home/surge/workspace/CC13/libraries 
- [DEFAULT]            PRE_BUILD_HOOK = pre-build-hook.sh 
- [USER]               BOARD_SUB = atmega328 
- [USER]               BOARD_TAG = diecimila 
- [COMPUTED]           CORE = arduino (from build.core)
- [COMPUTED]           VARIANT = standard (from build.variant)
- [COMPUTED]           OBJDIR = build-diecimila-atmega328 (from BOARD_TAG)
- [COMPUTED]           ARDUINO_CORE_PATH = /usr/local/arduino/hardware/arduino/avr/cores/arduino (from ARDUINO_DIR, BOARD_TAG and boards.txt)
- [USER]               MONITOR_BAUDRATE = 115200 
- [DEFAULT]            OPTIMIZATION_LEVEL = s 
- [DEFAULT]            MCU_FLAG_NAME = mmcu 
- [DEFAULT]            CFLAGS_STD = -std=gnu11 -flto -fno-fat-lto-objects 
- [DEFAULT]            CXXFLAGS_STD = -std=gnu++11 -fno-threadsafe-statics -flto 
- [COMPUTED]           DEVICE_PATH = /dev/ttyUSB0 (from MONITOR_PORT)
- [DEFAULT]            FORCE_MONITOR_PORT =  
- [AUTODETECTED]       Size utility: AVR-aware for enhanced output
-
-                      ARDUINO_LIBS =
- [USER]                 EEPROMex
- [USER]                 RFM69
- [USER]                 SPIFlash
- [USER]                 SerialUI
- [PLATFORM]             SPI
- [COMPUTED]           BOOTLOADER_PARENT = /usr/local/arduino/hardware/arduino/avr/bootloaders (from ARDUINO_DIR)
- [COMPUTED]           ARDMK_VERSION = 1.5 
- [COMPUTED]           CC_VERSION = 4.9.2 (avr-gcc)
-------------------------
/usr/local/arduino/hardware/tools/avr/bin/avrdude -q -V -p atmega328p -C /usr/local/arduino/hardware/tools/avr/etc/avrdude.conf -D -c arduino -b 57600 -P /dev/ttyUSB0 \
		-U flash:w:build-diecimila-atmega328/badge.hex:i

avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: reading input file "build-diecimila-atmega328/badge.hex"
avrdude: writing flash (23112 bytes):
avrdude: 23112 bytes of flash written

avrdude: safemode: Fuses OK (E:00, H:00, L:00)

avrdude done.  Thank you.

Missing SerialUI.h

wtf volvo why no SerialUI.h

pls give

EEPROMex.cpp.o: No such file or directory

~/P/C/badge (master ⚡→↩☡=) make upload
-------------------------
Arduino.mk Configuration:
- [AUTODETECTED]       CURRENT_OS = MAC
- [USER]               ARDUINO_DIR = /Applications/Arduino.app/Contents/Java
- [USER]               ARDMK_DIR = ../Arduino-Makefile//../Arduino-Makefile//../Arduino-Makefile
- [AUTODETECTED]       ARDUINO_VERSION = 182
- [DEFAULT]            ARCHITECTURE = avr
- [DEFAULT]            ARDMK_VENDOR = arduino
- [AUTODETECTED]       ARDUINO_PREFERENCES_PATH = /Users/Pysis/Library/Arduino15/preferences.txt
- [AUTODETECTED]       ARDUINO_SKETCHBOOK = /Users/Pysis/Documents/Arduino (from arduino preferences file)
- [BUNDLED]            AVR_TOOLS_DIR = /Applications/Arduino.app/Contents/Java/hardware/tools/avr (in Arduino distribution)
- [COMPUTED]           ARDUINO_LIB_PATH = /Applications/Arduino.app/Contents/Java/libraries (from ARDUINO_DIR)
- [COMPUTED]           ARDUINO_PLATFORM_LIB_PATH = /Applications/Arduino.app/Contents/Java/hardware/arduino/avr/libraries (from ARDUINO_DIR)
- [COMPUTED]           ARDUINO_VAR_PATH = /Applications/Arduino.app/Contents/Java/hardware/arduino/avr/variants (from ARDUINO_DIR)
- [COMPUTED]           BOARDS_TXT = /Applications/Arduino.app/Contents/Java/hardware/arduino/avr/boards.txt (from ARDUINO_DIR)
- [USER]               USER_LIB_PATH = /Users/Pysis/Programming/CC13/libraries
- [DEFAULT]            PRE_BUILD_HOOK = pre-build-hook.sh
- [USER]               BOARD_SUB = atmega328
- [USER]               BOARD_TAG = diecimila
- [COMPUTED]           CORE = arduino (from build.core)
- [COMPUTED]           VARIANT = standard (from build.variant)
- [COMPUTED]           OBJDIR = build-diecimila-atmega328 (from BOARD_TAG)
- [COMPUTED]           ARDUINO_CORE_PATH = /Applications/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino (from ARDUINO_DIR, BOARD_TAG and boards.txt)
- [USER]               MONITOR_BAUDRATE = 115200
- [DEFAULT]            OPTIMIZATION_LEVEL = s
- [DEFAULT]            MCU_FLAG_NAME = mmcu
- [DEFAULT]            CFLAGS_STD = -std=gnu11 -flto -fno-fat-lto-objects
- [DEFAULT]            CXXFLAGS_STD = -std=gnu++11 -fno-threadsafe-statics -flto
- [COMPUTED]           DEVICE_PATH = /dev/tty.usbserial-12345678 (from MONITOR_PORT)
- [DEFAULT]            FORCE_MONITOR_PORT =
- [AUTODETECTED]       Size utility: AVR-aware for enhanced output
-
-                      ARDUINO_LIBS =
- [USER]                 EEPROMex
- [USER]                 RFM69
- [USER]                 SPIFlash
- [USER]                 SerialUI
- [PLATFORM]             SPI
- [COMPUTED]           BOOTLOADER_PARENT = /Applications/Arduino.app/Contents/Java/hardware/arduino/avr/bootloaders (from ARDUINO_DIR)
- [COMPUTED]           ARDMK_VERSION = 1.5
- [COMPUTED]           CC_VERSION = 4.9.2 (avr-gcc)
-------------------------
mkdir -p build-diecimila-atmega328
...
/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avr-gcc -MMD -c -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=182 -DARDUINO_ARCH_AVR -D__PROG_TYPES_COMPAT__ -I/Applications/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino -I/Applications/Arduino.app/Contents/Java/hardware/arduino/avr/variants/standard    -I/Applications/Arduino.app/Contents/Java/hardware/arduino/avr/libraries/SPI/src   -I/Users/Pysis/Programming/CC13/libraries/EEPROMex   -I/Users/Pysis/Programming/CC13/libraries/RFM69   -I/Users/Pysis/Programming/CC13/libraries/SPIFlash   -I/Users/Pysis/Programming/CC13/libraries/SerialUI/src -Wall -ffunction-sections -fdata-sections -Os -x assembler-with-cpp -flto /Applications/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/wiring_pulse.S -o build-diecimila-atmega328/core/wiring_pulse.S.o
/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avr-gcc-ar rcs build-diecimila-atmega328/libcore.a  build-diecimila-atmega328/core/WInterrupts.c.o  build-diecimila-atmega328/core/hooks.c.o  build-diecimila-atmega328/core/wiring.c.o  build-diecimila-atmega328/core/wiring_analog.c.o  build-diecimila-atmega328/core/wiring_digital.c.o  build-diecimila-atmega328/core/wiring_pulse.c.o  build-diecimila-atmega328/core/wiring_shift.c.o  build-diecimila-atmega328/core/CDC.cpp.o  build-diecimila-atmega328/core/HardwareSerial.cpp.o  build-diecimila-atmega328/core/HardwareSerial0.cpp.o  build-diecimila-atmega328/core/HardwareSerial1.cpp.o  build-diecimila-atmega328/core/HardwareSerial2.cpp.o  build-diecimila-atmega328/core/HardwareSerial3.cpp.o  build-diecimila-atmega328/core/IPAddress.cpp.o  build-diecimila-atmega328/core/PluggableUSB.cpp.o  build-diecimila-atmega328/core/Print.cpp.o  build-diecimila-atmega328/core/Stream.cpp.o  build-diecimila-atmega328/core/Tone.cpp.o  build-diecimila-atmega328/core/USBCore.cpp.o  build-diecimila-atmega328/core/WMath.cpp.o  build-diecimila-atmega328/core/WString.cpp.o  build-diecimila-atmega328/core/abi.cpp.o  build-diecimila-atmega328/core/main.cpp.o  build-diecimila-atmega328/core/new.cpp.o  build-diecimila-atmega328/core/wiring_pulse.S.o    build-diecimila-atmega328/platformlibs/SPI/src/SPI.cpp.o   build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/EEPROMex/EEPROMex.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/RFM69/RFM69.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/RFM69/RFM69_ATC.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/RFM69/RFM69_OTA.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SPIFlash/SPIFlash.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/Command.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/Delegate.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/DelegateDummy.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/MenuItem.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/Request.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/SUIMenu.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/SUIStateTracking.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/SerialUI.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/SovAPipe.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/SovAPlat_DigiUSB.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/SovAStreamBase.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/SovAStreamStandard.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/SovaStreamDigi.cpp.o build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/SerialUI/src/SubMenu.cpp.o
/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/../lib/gcc/avr/4.9.2/../../../../avr/bin/ar: build-diecimila-atmega328/userlibs/Users/Pysis/Programming/CC13/libraries/EEPROMex/EEPROMex.cpp.o: No such file or directory
make: *** [build-diecimila-atmega328/libcore.a] Error 1

Mac 10.12.4, fish shell 2.5.0.