Helios EasyControls Modbus TCP/IP integration for Home Assistant
Enable Modbus on device and set minimum fan speed to 0.
Install component than select Helios Easy Controls from Home Assistant integrations.
Integration adds a fan entity, and the following sensors:
-
Preheater operation hours
-
Preheater percentage
-
Afterheater operation hours
-
Afterheater percentage
-
Outside air temperature
-
Supply air temperature
-
Extract air temperature
-
Outgoing air temperature
-
Extract air relative humidity
-
Party mode remaning time
-
Airflow rate (approximately value)
-
Fan speed percentage
-
Fan stage
-
Extract air fan operation hours
-
Extract air fan rpm
-
Extract air fan stage
-
Supply air fan operation hours
-
Supply air fan rpm
-
Supply air fan stage
-
Heat recovery efficiency (based on: https://www.engineeringtoolbox.com/heat-recovery-efficiency-d_201.html)
-
Bypass state
-
Filter change
-
Errors
-
Warnings
-
Information
Also it adds service easycontrols.party_mode
to change fan speed for limited time.