[โฌ๏ธ Download] [๐ Command reference] [๐ Additional documents]
nerdctl
is a Docker-compatible CLI for containerd.
โ
Same UI/UX as docker
โ
Supports Docker Compose (nerdctl compose up
)
โ Supports rootless mode
โ Supports lazy-pulling (Stargz)
โ Supports encrypted images (ocicrypt)
โ Supports P2P image distribution (IPFS)
nerdctl is a non-core sub-project of containerd.
To run a container with the default CNI network (10.4.0.0/24):
# nerdctl run -it --rm alpine
To build an image using BuildKit:
# nerdctl build -t foo /some-dockerfile-directory
# nerdctl run -it --rm foo
To build and send output to a local directory using BuildKit:
# nerdctl build -o type=local,dest=. /some-dockerfile-directory
To run containers from docker-compose.yaml
:
# nerdctl compose -f ./examples/compose-wordpress/docker-compose.yaml up
See also ./examples/compose-wordpress
.
To list Kubernetes containers:
# nerdctl --namespace k8s.io ps -a
To launch rootless containerd:
$ containerd-rootless-setuptool.sh install
To run a container with rootless containerd:
$ nerdctl run -d -p 8080:80 --name nginx nginx:alpine
See ./docs/rootless.md
.
Binaries are available here: https://github.com/containerd/nerdctl/releases
In addition to containerd, the following components should be installed (optional):
- CNI plugins: for using
nerdctl run
. - CNI isolation plugin: for isolating bridge networks (
nerdctl network create
) - BuildKit: for using
nerdctl build
. BuildKit daemon (buildkitd
) needs to be running. - RootlessKit and slirp4netns: for Rootless mode
- RootlessKit needs to be v0.10.0 or later. v0.14.1 or later is recommended.
- slirp4netns needs to be v0.4.0 or later. v1.1.7 or later is recommended.
These dependencies are included in nerdctl-full-<VERSION>-<OS>-<ARCH>.tar.gz
, but not included in nerdctl-<VERSION>-<OS>-<ARCH>.tar.gz
.
Lima project provides Linux virtual machines with built-in integration for nerdctl.
$ brew install lima
$ limactl start
$ lima nerdctl run -d --name nginx -p 127.0.0.1:8080:80 nginx:alpine
See ./docs/freebsd.md
.
- Linux containers: Known to work on WSL2
- Windows containers: experimental support for Windows (see below for features that are currently known to work)
To run containerd and nerdctl inside Docker:
docker build -t nerdctl .
docker run -it --rm --privileged nerdctl
The goal of nerdctl
is to facilitate experimenting the cutting-edge features of containerd that are not present in Docker.
Such features include, but not limited to, on-demand image pulling (lazy-pulling) and image encryption/decryption.
Note that competing with Docker is not the goal of nerdctl
. Those cutting-edge features are expected to be eventually available in Docker as well.
Also, nerdctl
might be potentially useful for debugging Kubernetes clusters, but it is not the primary goal.
Major:
- On-demand image pulling (lazy-pulling) using Stargz Snapshotter:
nerdctl --snapshotter=stargz run IMAGE
. - Image encryption and decryption using ocicrypt (imgcrypt):
nerdctl image (encrypt|decrypt) SRC DST
- P2P image distribution using IPFS:
nerdctl run ipfs://CID
- Recursive read-only (RRO) bind-mount:
nerdctl run -v /mnt:/mnt:rro
(make children such as/mnt/usb
to be read-only, too). Requires kernel >= 5.12, and crun >= 1.4 or runc >= 1.1 (PR #3272).
Minor:
- Namespacing:
nerdctl --namespace=<NS> ps
. (NOTE: All Kubernetes containers are in thek8s.io
containerd namespace regardless to Kubernetes namespaces) - Exporting Docker/OCI dual-format archives:
nerdctl save
. - Importing OCI archives as well as Docker archives:
nerdctl load
. - Specifying a non-image rootfs:
nerdctl run -it --rootfs <ROOTFS> /bin/sh
. The CLI syntax conforms to Podman convention. - Connecting a container to multiple networks at once:
nerdctl run --net foo --net bar
- Running FreeBSD jails.
- Better multi-platform support, e.g.,
nerdctl pull --all-platforms IMAGE
- Applying an (existing) AppArmor profile to rootless containers:
nerdctl run --security-opt apparmor=<PROFILE>
. Usesudo nerdctl apparmor load
to load thenerdctl-default
profile.
Trivial:
- Inspecting raw OCI config:
nerdctl container inspect --mode=native
.
-
ctr
: incompatible with Docker CLI, and not friendly to users. Notably,ctr
lacks the equivalents of the following Docker CLI commands:docker run -p <PORT>
docker run --restart=always --net=bridge
docker pull
with~/.docker/config.json
and credential helper binaries such asdocker-credential-ecr-login
docker logs
-
crictl
: incompatible with Docker CLI, not friendly to users, and does not support non-CRI features -
k3c v0.2 (abandoned): needs an extra daemon, and does not support non-CRI features
-
Rancher Kim (nee k3c v0.3): needs Kubernetes, and only focuses on image management commands such as
kim build
andkim push
-
PouchContainer (abandoned?): needs an extra daemon
nerdctl is a containerd non-core sub-project, licensed under the Apache 2.0 license. As a containerd non-core sub-project, you will find the:
information in our containerd/project
repository.
Run make && sudo make install
.
Using go install github.com/containerd/nerdctl/cmd/nerdctl
is possible, but unrecommended because it does not fill version strings printed in nerdctl version
Run go test -v ./pkg/...
Run go test -exec sudo -v ./cmd/nerdctl/...
after make && sudo make install
.
For testing rootless mode, -exec sudo
is not needed.
To run tests in a container:
docker build -t test-integration --target test-integration .
docker run -t --rm --privileged test-integration
Run go test -exec sudo -v ./cmd/nerdctl/... -args test.target=docker
to ensure that the test suite is compatible with Docker.
Lots of commands and flags are currently missing. Pull requests are highly welcome.
Please certify your Developer Certificate of Origin (DCO), by signing off your commit with git commit -s
and with your real name.
๐ณ = Docker compatible
๐ค = nerdctl specific
๐ฆ = Windows enabled
Unlisted docker
CLI flags are unimplemented yet in nerdctl
CLI.
It does not necessarily mean that the corresponding features are missing in containerd.
- Run & Exec
- Container management
- Build
- Image management
- Registry
- Network management
- Volume management
- Namespace management
- AppArmor profile management
- System
- Stats
- Shell completion
- Compose
- IPFS management
- Global flags
- Unimplemented Docker commands
- Additional documents
Run a command in a new container.
Usage: nerdctl run [OPTIONS] IMAGE [COMMAND] [ARG...]
๐ค ipfs://
prefix can be used for IMAGE
to pull it from IFPS. See /docs/ipfs.md
for details.
Basic flags:
- ๐ณ ๐ฆ
-i, --interactive
: Keep STDIN open even if not attached" - ๐ณ ๐ฆ
-t, --tty
: Allocate a pseudo-TTYโ ๏ธ WIP: currently-t
requires-i
, and conflicts with-d
- ๐ณ ๐ฆ
-d, --detach
: Run container in background and print container ID - ๐ณ
--restart=(no|always)
: Restart policy to apply when a container exits- Default: "no"
โ ๏ธ No support foron-failure
andunless-stopped
- ๐ณ
--rm
: Automatically remove the container when it exits - ๐ณ
--pull=(always|missing|never)
: Pull image before running- Default: "missing"
- ๐ณ
--pid=(host)
: PID namespace to use
Platform flags:
- ๐ณ
--platform=(amd64|arm64|...)
: Set platform
Network flags:
- ๐ณ
--net, --network=(bridge|host|none|<CNI>)
: Connect a container to a network- Default: "bridge"
- ๐ค Unlike Docker, this flag can be specified multiple times (
--net foo --net bar
)
- ๐ณ
-p, --publish
: Publish a container's port(s) to the host - ๐ณ
--dns
: Set custom DNS servers - ๐ณ
-h, --hostname
: Container host name - ๐ณ
--add-host
: Add a custom host-to-IP mapping (host:ip)
Cgroup flags:
- ๐ณ
--cpus
: Number of CPUs - ๐ณ
--cpu-shares
: CPU shares (relative weight) - ๐ณ
--cpuset-cpus
: CPUs in which to allow execution (0-3, 0,1) - ๐ณ
--memory
: Memory limit - ๐ณ
--pids-limit
: Tune container pids limit - ๐ค
--cgroup-conf
: Configure cgroup v2 (key=value) - ๐ณ
blkio-weight
: Block IO (relative weight), between 10 and 1000, or 0 to disable (default 0) - ๐ณ
--cgroupns=(host|private)
: Cgroup namespace to use- Default: "private" on cgroup v2 hosts, "host" on cgroup v1 hosts
- ๐ณ
--device
: Add a host device to the container
User flags:
- ๐ณ ๐ฆ
-u, --user
: Username or UID (format: <name|uid>[:<group|gid>])
Security flags:
- ๐ณ
--security-opt seccomp=<PROFILE_JSON_FILE>
: specify custom seccomp profile - ๐ณ
--security-opt apparmor=<PROFILE>
: specify custom AppArmor profile - ๐ณ
--security-opt no-new-privileges
: disallow privilege escalation, e.g., setuid and file capabilities - ๐ณ
--cap-add=<CAP>
: Add Linux capabilities - ๐ณ
--cap-drop=<CAP>
: Drop Linux capabilities - ๐ณ
--privileged
: Give extended privileges to this container
Runtime flags:
- ๐ณ
--runtime
: Runtime to use for this container, e.g. "crun", or "io.containerd.runsc.v1". - ๐ณ
--sysctl
: Sysctl options, e.g "net.ipv4.ip_forward=1"
Volume flags:
- ๐ณ ๐ฆ
-v, --volume <SRC>:<DST>[:<OPT>]
: Bind mount a volume, e.g.,-v /mnt:/mnt:rro,rprivate
- ๐ณ option
rw
: Read/Write (when writable) - ๐ณ option
ro
: Non-recursive read-only - ๐ค option
rro
: Recursive read-only. Should be used in conjunction withrprivate
. e.g.,-v /mnt:/mnt:rro,rprivate
makes children such as/mnt/usb
to be read-only, too. Requires kernel >= 5.12, and crun >= 1.4 or runc >= 1.1 (PR #3272). With older runc,rro
just works asro
. - ๐ณ option
shared
,slave
,private
: Non-recursive "shared" / "slave" / "private" propagation - ๐ณ option
rshared
,rslave
,rprivate
: Recursive "shared" / "slave" / "private" propagation
- ๐ณ option
- ๐ณ
--tmpfs
: Mount a tmpfs directory
Rootfs flags:
- ๐ณ
--read-only
: Mount the container's root filesystem as read only - ๐ค
--rootfs
: The first argument is not an image but the rootfs to the exploded container. Corresponds to Podman CLI.
Env flags:
- ๐ณ ๐ฆ
--entrypoint
: Overwrite the default ENTRYPOINT of the image - ๐ณ ๐ฆ
-w, --workdir
: Working directory inside the container - ๐ณ ๐ฆ
-e, --env
: Set environment variables - ๐ณ ๐ฆ
--env-file
: Set environment variables from file
Metadata flags:
- ๐ณ ๐ฆ
--name
: Assign a name to the container - ๐ณ ๐ฆ
-l, --label
: Set meta data on a container - ๐ณ ๐ฆ
--label-file
: Read in a line delimited file of labels - ๐ณ ๐ฆ
--cidfile
: Write the container ID to the file - ๐ค
--pidfile
: file path to write the task's pid. The CLI syntax conforms to Podman convention.
Shared memory flags:
- ๐ณ
--shm-size
: Size of/dev/shm
GPU flags:
- ๐ณ
--gpus
: GPU devices to add to the container ('all' to pass all GPUs). Please see also ./docs/gpu.md for details.
Ulimit flags:
- ๐ณ
--ulimit
: Set ulimit
Other docker run
flags are on plan but unimplemented yet.
Clicke here to show all the `docker run` flags (Docker 20.10)
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Run a command in a new container
Options:
--add-host list Add a custom host-to-IP mapping (host:ip)
-a, --attach list Attach to STDIN, STDOUT or STDERR
--blkio-weight uint16 Block IO (relative weight), between 10 and 1000, or 0 to disable (default 0)
--blkio-weight-device list Block IO weight (relative device weight) (default [])
--cap-add list Add Linux capabilities
--cap-drop list Drop Linux capabilities
--cgroup-parent string Optional parent cgroup for the container
--cgroupns string Cgroup namespace to use (host|private)
'host': Run the container in the Docker host's cgroup namespace
'private': Run the container in its own private cgroup namespace
'': Use the cgroup namespace as configured by the
default-cgroupns-mode option on the daemon (default)
--cidfile string Write the container ID to the file
--cpu-period int Limit CPU CFS (Completely Fair Scheduler) period
--cpu-quota int Limit CPU CFS (Completely Fair Scheduler) quota
--cpu-rt-period int Limit CPU real-time period in microseconds
--cpu-rt-runtime int Limit CPU real-time runtime in microseconds
-c, --cpu-shares int CPU shares (relative weight)
--cpus decimal Number of CPUs
--cpuset-cpus string CPUs in which to allow execution (0-3, 0,1)
--cpuset-mems string MEMs in which to allow execution (0-3, 0,1)
-d, --detach Run container in background and print container ID
--detach-keys string Override the key sequence for detaching a container
--device list Add a host device to the container
--device-cgroup-rule list Add a rule to the cgroup allowed devices list
--device-read-bps list Limit read rate (bytes per second) from a device (default [])
--device-read-iops list Limit read rate (IO per second) from a device (default [])
--device-write-bps list Limit write rate (bytes per second) to a device (default [])
--device-write-iops list Limit write rate (IO per second) to a device (default [])
--disable-content-trust Skip image verification (default true)
--dns list Set custom DNS servers
--dns-option list Set DNS options
--dns-search list Set custom DNS search domains
--domainname string Container NIS domain name
--entrypoint string Overwrite the default ENTRYPOINT of the image
-e, --env list Set environment variables
--env-file list Read in a file of environment variables
--expose list Expose a port or a range of ports
--gpus gpu-request GPU devices to add to the container ('all' to pass all GPUs)
--group-add list Add additional groups to join
--health-cmd string Command to run to check health
--health-interval duration Time between running the check (ms|s|m|h) (default 0s)
--health-retries int Consecutive failures needed to report unhealthy
--health-start-period duration Start period for the container to initialize before starting health-retries countdown (ms|s|m|h) (default 0s)
--health-timeout duration Maximum time to allow one check to run (ms|s|m|h) (default 0s)
--help Print usage
-h, --hostname string Container host name
--init Run an init inside the container that forwards signals and reaps processes
-i, --interactive Keep STDIN open even if not attached
--ip string IPv4 address (e.g., 172.30.100.104)
--ip6 string IPv6 address (e.g., 2001:db8::33)
--ipc string IPC mode to use
--isolation string Container isolation technology
--kernel-memory bytes Kernel memory limit
-l, --label list Set meta data on a container
--label-file list Read in a line delimited file of labels
--link list Add link to another container
--link-local-ip list Container IPv4/IPv6 link-local addresses
--log-driver string Logging driver for the container
--log-opt list Log driver options
--mac-address string Container MAC address (e.g., 92:d0:c6:0a:29:33)
-m, --memory bytes Memory limit
--memory-reservation bytes Memory soft limit
--memory-swap bytes Swap limit equal to memory plus swap: '-1' to enable unlimited swap
--memory-swappiness int Tune container memory swappiness (0 to 100) (default -1)
--mount mount Attach a filesystem mount to the container
--name string Assign a name to the container
--network network Connect a container to a network
--network-alias list Add network-scoped alias for the container
--no-healthcheck Disable any container-specified HEALTHCHECK
--oom-kill-disable Disable OOM Killer
--oom-score-adj int Tune host's OOM preferences (-1000 to 1000)
--pid string PID namespace to use
--pids-limit int Tune container pids limit (set -1 for unlimited)
--platform string Set platform if server is multi-platform capable
--privileged Give extended privileges to this container
-p, --publish list Publish a container's port(s) to the host
-P, --publish-all Publish all exposed ports to random ports
--pull string Pull image before running ("always"|"missing"|"never") (default "missing")
--read-only Mount the container's root filesystem as read only
--restart string Restart policy to apply when a container exits (default "no")
--rm Automatically remove the container when it exits
--runtime string Runtime to use for this container
--security-opt list Security Options
--shm-size bytes Size of /dev/shm
--sig-proxy Proxy received signals to the process (default true)
--stop-signal string Signal to stop a container (default "SIGTERM")
--stop-timeout int Timeout (in seconds) to stop a container
--storage-opt list Storage driver options for the container
--sysctl map Sysctl options (default map[])
--tmpfs list Mount a tmpfs directory
-t, --tty Allocate a pseudo-TTY
--ulimit ulimit Ulimit options (default [])
-u, --user string Username or UID (format: <name|uid>[:<group|gid>])
--userns string User namespace to use
--uts string UTS namespace to use
-v, --volume list Bind mount a volume
--volume-driver string Optional volume driver for the container
--volumes-from list Mount volumes from the specified container(s)
-w, --workdir string Working directory inside the container
Run a command in a running container.
Usage: nerdctl exec [OPTIONS] CONTAINER COMMAND [ARG...]
Flags:
- ๐ณ
-i, --interactive
: Keep STDIN open even if not attached - ๐ณ
-t, --tty
: Allocate a pseudo-TTYโ ๏ธ WIP: currently-t
requires-i
, and conflicts with-d
- ๐ณ
-d, --detach
: Detached mode: run command in the background - ๐ณ
-w, --workdir
: Working directory inside the container - ๐ณ
-e, --env
: Set environment variables - ๐ณ
--env-file
: Set environment variables from file - ๐ณ
--privileged
: Give extended privileges to the command
Unimplemented docker exec
flags: --detach-keys
, --user
List containers.
Usage: nerdctl ps [OPTIONS]
Flags:
- ๐ณ
-a, --all
: Show all containers (default shows just running) - ๐ณ
--no-trunc
: Don't truncate output - ๐ณ
-q, --quiet
: Only display container IDs - ๐ณ
--format
: Format the output using the given Go template, e.g,{{json .}}
Unimplemented docker ps
flags: --filter
, --last
, --size
Display detailed information on one or more containers.
Usage: nerdctl inspect [OPTIONS] NAME|ID [NAME|ID...]
Flags:
- ๐ค
--mode=(dockercompat|native)
: Inspection mode. "native" produces more information. - ๐ณ
--format
: Format the output using the given Go template, e.g,{{json .}}
Unimplemented docker inspect
flags: --size
, --type
Fetch the logs of a container.
nerdctl run -d
are supported.
Usage: nerdctl logs [OPTIONS] CONTAINER
Flags:
- ๐ณ
--f, --follow
: Follow log output - ๐ณ
--since
: Show logs since timestamp (e.g. 2013-01-02T13:23:37Z) or relative (e.g. 42m for 42 minutes) - ๐ณ
--until
: Show logs before a timestamp (e.g. 2013-01-02T13:23:37Z) or relative (e.g. 42m for 42 minutes) - ๐ณ
-t, --timestamps
: Show timestamps - ๐ณ
-n, --tail
: Number of lines to show from the end of the logs (default "all")
Unimplemented docker logs
flags: --details
List port mappings or a specific mapping for the container.
Usage: nerdctl port CONTAINER [PRIVATE_PORT[/PROTO]]
Remove one or more containers.
Usage: nerdctl rm [OPTIONS] CONTAINER [CONTAINER...]
Flags:
- ๐ณ
-f, --force
: Force the removal of a running|paused|unknown container (uses SIGKILL) - ๐ณ
-v, --volumes
: Remove anonymous volumes associated with the container
Unimplemented docker rm
flags: --link
Stop one or more running containers.
Usage: nerdctl stop [OPTIONS] CONTAINER [CONTAINER...]
Flags:
- ๐ณ
-t, --time=SECONDS
: Seconds to wait for stop before killing it (default "10")
Start one or more running containers.
Usage: nerdctl start [OPTIONS] CONTAINER [CONTAINER...]
Unimplemented docker start
flags: --attach
, --checkpoint
, --checkpoint-dir
, --detach-keys
, --interactive
Restart one or more running containers.
Usage: nerdctl restart [OPTIONS] CONTAINER [CONTAINER...]
Flags:
- ๐ณ
-t, --time=SECONDS
: Seconds to wait for stop before killing it (default "10")
Block until one or more containers stop, then print their exit codes.
Usage: nerdctl wait CONTAINER [CONTAINER...]
Kill one or more running containers.
Usage: nerdctl kill [OPTIONS] CONTAINER [CONTAINER...]
Flags:
- ๐ณ
-s, --signal
: Signal to send to the container (default: "KILL")
Pause all processes within one or more containers.
Usage: nerdctl pause CONTAINER [CONTAINER...]
Unpause all processes within one or more containers.
Usage: nerdctl unpause CONTAINER [CONTAINER...]
Build an image from a Dockerfile.
โน๏ธ Needs buildkitd to be running.
Usage: nerdctl build [OPTIONS] PATH
Flags:
- ๐ค
--buildkit-host=<BUILDKIT_HOST>
: BuildKit address - ๐ณ
-t, --tag
: Name and optionally a tag in the 'name:tag' format - ๐ณ
-f, --file
: Name of the Dockerfile - ๐ณ
--target
: Set the target build stage to build - ๐ณ
--build-arg
: Set build-time variables - ๐ณ
--no-cache
: Do not use cache when building the image - ๐ณ
--output=OUTPUT
: Output destination (format: type=local,dest=path)- ๐ณ
type=local,dest=path/to/output-dir
: Local directory - ๐ณ
type=oci[,dest=path/to/output.tar]
: Docker/OCI dual-format tar ball (compatible withdocker buildx build
) - ๐ณ
type=docker[,dest=path/to/output.tar]
: Docker format tar ball (compatible withdocker buildx build
) - ๐ณ
type=tar[,dest=path/to/output.tar]
: Raw tar ball - ๐ณ
type=image,name=example.com/image,push=true
: Push to a registry (seebuildctl build
documentation)
- ๐ณ
- ๐ณ
--progress=(auto|plain|tty)
: Set type of progress output (auto, plain, tty). Use plain to show container output - ๐ณ
--secret
: Secret file to expose to the build: id=mysecret,src=/local/secret - ๐ณ
--ssh
: SSH agent socket or keys to expose to the build (format:default|<id>[=<socket>|<key>[,<key>]]
) - ๐ณ
-q, --quiet
: Suppress the build output and print image ID on success - ๐ณ
--cache-from=CACHE
: External cache sources (eg. user/app:cache, type=local,src=path/to/dir) (compatible withdocker buildx build
) - ๐ณ
--cache-to=CACHE
: Cache export destinations (eg. user/app:cache, type=local,dest=path/to/dir) (compatible withdocker buildx build
) - ๐ณ
--platform=(amd64|arm64|...)
: Set target platform for build (compatible withdocker buildx build
) - ๐ค
--ipfs
: Build image with pulling base images from IFPS. See./docs/ipfs.md
for details.
Unimplemented docker build
flags: --add-host
, --iidfile
, --label
, --network
, --squash
Create a new image from a container's changes
Usage: nerdctl commit [OPTIONS] CONTAINER [REPOSITORY[:TAG]]
Flags:
- ๐ณ
-a, --author
: Author (e.g., "nerdctl contributor [email protected]") - ๐ณ
-m, --message
: Commit message
Unimplemented docker commit
flags: --change
, --pause
List images
Usage: nerdctl images [OPTIONS] [REPOSITORY[:TAG]]
Flags:
- ๐ณ
-a, --all
: Show all images (unimplemented) - ๐ณ
-q, --quiet
: Only show numeric IDs - ๐ณ
--no-trunc
: Don't truncate output - ๐ณ
--format
: Format the output using the given Go template, e.g,{{json .}}
- ๐ณ
--digests
: Show digests (compatible with Docker, unlike ID)
Unimplemented docker images
flags: --filter
Pull an image from a registry.
Usage: nerdctl pull [OPTIONS] NAME[:TAG|@DIGEST]
๐ค ipfs://
prefix can be used for NAME
to pull it from IFPS. See /docs/ipfs.md
for details.
Flags:
- ๐ณ
--platform=(amd64|arm64|...)
: Pull content for a specific platform- ๐ค Unlike Docker, this flag can be specified multiple times (
--platform=amd64 --platform=arm64
)
- ๐ค Unlike Docker, this flag can be specified multiple times (
- ๐ค
--all-platforms
: Pull content for all platforms - ๐ค
--unpack
: Unpack the image for the current single platform (auto/true/false)
Unimplemented docker pull
flags: --all-tags
, --disable-content-trust
(default true), --quiet
Push an image to a registry.
Usage: nerdctl push [OPTIONS] NAME[:TAG]
๐ค ipfs://
prefix can be used for NAME
to push it to IFPS. See /docs/ipfs.md
for details.
Flags:
- ๐ค
--platform=(amd64|arm64|...)
: Push content for a specific platform - ๐ค
--all-platforms
: Push content for all platforms
Unimplemented docker push
flags: --all-tags
, --disable-content-trust
(default true), --quiet
Load an image from a tar archive or STDIN.
๐ค Supports both Docker Image Spec v1.2 and OCI Image Spec v1.0.
Usage: nerdctl load [OPTIONS]
Flags:
- ๐ณ
-i, --input
: Read from tar archive file, instead of STDIN - ๐ค
--platform=(amd64|arm64|...)
: Import content for a specific platform - ๐ค
--all-platforms
: Import content for all platforms
Unimplemented docker load
flags: --quiet
Save one or more images to a tar archive (streamed to STDOUT by default)
๐ค The archive implements both Docker Image Spec v1.2 and OCI Image Spec v1.0.
Usage: nerdctl save [OPTIONS] IMAGE [IMAGE...]
Flags:
- ๐ณ
-o, --output
: Write to a file, instead of STDOUT - ๐ค
--platform=(amd64|arm64|...)
: Export content for a specific platform - ๐ค
--all-platforms
: Export content for all platforms
Create a tag TARGET_IMAGE that refers to SOURCE_IMAGE.
Usage: nerdctl tag SOURCE_IMAGE[:TAG] TARGET_IMAGE[:TAG]
Remove one or more images
Usage: nerdctl rmi [OPTIONS] IMAGE [IMAGE...]
Flags:
- ๐ค
--async
: Asynchronous mode - ๐ณ
-f, --force
: Ignore removal errorsโ ๏ธ WIP: currently, images are always forcibly removed, even when--force
is not specified.
Unimplemented docker rmi
flags: --no-prune
Display detailed information on one or more images.
Usage: nerdctl image inspect [OPTIONS] NAME|ID [NAME|ID...]
Flags:
- ๐ค
--mode=(dockercompat|native)
: Inspection mode. "native" produces more information. - ๐ณ
--format
: Format the output using the given Go template, e.g,{{json .}}
- ๐ค
--platform=(amd64|arm64|...)
: Inspect a specific platform
Convert an image format.
e.g., nerdctl image convert --estargz --oci example.com/foo:orig example.com/foo:esgz
Usage: nerdctl image convert [OPTIONS] SOURCE_IMAGE[:TAG] TARGET_IMAGE[:TAG]
Flags:
--estargz
: convert legacy tar(.gz) layers to eStargz for lazy pulling. Should be used in conjunction with '--oci'--estargz-record-in=<FILE>
: readctr-remote optimize --record-out=<FILE>
record file.โ ๏ธ This flag is experimental and subject to change.--estargz-compression-level=<LEVEL>
: eStargz compression level (default: 9)--estargz-chunk-size=<SIZE>
: eStargz chunk size--uncompress
: convert tar.gz layers to uncompressed tar layers--oci
: convert Docker media types to OCI media types--platform=<PLATFORM>
: convert content for a specific platform--all-platforms
: convert content for all platforms (default: false)
Encrypt image layers. See ./docs/ocicrypt.md
.
Usage: nerdctl image encrypt [OPTIONS] SOURCE_IMAGE[:TAG] TARGET_IMAGE[:TAG]
Example:
openssl genrsa -out mykey.pem
openssl rsa -in mykey.pem -pubout -out mypubkey.pem
nerdctl image encrypt --recipient=jwe:mypubkey.pem --platform=linux/amd64,linux/arm64 foo example.com/foo:encrypted
nerdctl push example.com/foo:encrypted
Env
and Cmd
.
To see non-encrypted information, run nerdctl image inspect --mode=native --platform=PLATFORM example.com/foo:encrypted
.
Flags:
--recipient=<RECIPIENT>
: Recipient of the image is the person who can decrypt (e.g.,jwe:mypubkey.pem
)--dec-recipient=<RECIPIENT>
: Recipient of the image; used only for PKCS7 and must be an x509 certificate--key=<KEY>[:<PWDESC>]
: A secret key's filename and an optional password separated by colon, PWDDESC=|pass:|fd=|filename--gpg-homedir=<DIR>
: The GPG homedir to use; by default gpg uses ~/.gnupg--gpg-version=<VERSION>
: The GPG version ("v1" or "v2"), default will make an educated guess--platform=<PLATFORM>
: Convert content for a specific platform--all-platforms
: Convert content for all platforms (default: false)
Decrypt image layers. See ./docs/ocicrypt.md
.
Usage: nerdctl image decrypt [OPTIONS] SOURCE_IMAGE[:TAG] TARGET_IMAGE[:TAG]
Example:
nerdctl pull --unpack=false example.com/foo:encrypted
nerdctl image decrypt --key=mykey.pem example.com/foo:encrypted foo:decrypted
Flags:
--dec-recipient=<RECIPIENT>
: Recipient of the image; used only for PKCS7 and must be an x509 certificate--key=<KEY>[:<PWDESC>]
: A secret key's filename and an optional password separated by colon, PWDDESC=|pass:|fd=|filename--gpg-homedir=<DIR>
: The GPG homedir to use; by default gpg uses ~/.gnupg--gpg-version=<VERSION>
: The GPG version ("v1" or "v2"), default will make an educated guess--platform=<PLATFORM>
: Convert content for a specific platform--all-platforms
: Convert content for all platforms (default: false)
Log in to a Docker registry.
Usage: nerdctl login [OPTIONS] [SERVER]
Flags:
- ๐ณ
-u, --username
: Username - ๐ณ
-p, --password
: Password - ๐ณ
--password-stdin
: Take the password from stdin
Log out from a Docker registry
Usage: nerdctl logout [SERVER]
Create a network
โน๏ธ To isolate CNI bridge, CNI isolation plugin needs to be installed.
Usage: nerdctl network create [OPTIONS] NETWORK
Flags:
- ๐ณ
--subnet
: Subnet in CIDR format that represents a network segment, e.g. "10.5.0.0/16" - ๐ณ
--label
: Set metadata on a network
Unimplemented docker network create
flags: --attachable
, --aux-address
, --config-from
, --config-only
, --driver
, --gateway
, --ingress
, --internal
, --ip-range
, --ipam-driver
, --ipam-opt
, --ipv6
, --opt
, --scope
List networks
Usage: nerdctl network ls [OPTIONS]
Flags:
- ๐ณ
-q, --quiet
: Only display network IDs - ๐ณ
--format
: Format the output using the given Go template, e.g,{{json .}}
Unimplemented docker network ls
flags: --filter
, --no-trunc
Display detailed information on one or more networks
Usage: nerdctl network inspect [OPTIONS] NETWORK [NETWORK...]
Flags:
- ๐ณ
--format
: Format the output using the given Go template, e.g,{{json .}}
Unimplemented docker network inspect
flags: --verbose
Remove one or more networks
Usage: nerdctl network rm NETWORK [NETWORK...]
Create a volume
Usage: nerdctl volume create [OPTIONS] [VOLUME]
Flags:
- ๐ณ
--label
: Set metadata for a volume
Unimplemented docker volume create
flags: --driver
, --opt
List volumes
Usage: nerdctl volume ls [OPTIONS]
Flags:
- ๐ณ
-q, --quiet
: Only display volume names - ๐ณ
--format
: Format the output using the given Go template, e.g,{{json .}}
Unimplemented docker volume ls
flags: --filter
Display detailed information on one or more volumes
Usage: nerdctl volume inspect [OPTIONS] VOLUME [VOLUME...]
Flags:
- ๐ณ
--format
: Format the output using the given Go template, e.g,{{json .}}
Remove one or more volumes
Usage: nerdctl volume rm [OPTIONS] VOLUME [VOLUME...]
- ๐ณ
-f, --force
: Force the removal of one or more volumesโ ๏ธ WIP: currently, volumes are always forcibly removed, even when--force
is not specified.
List containerd namespaces such as "default", "moby", or "k8s.io".
Usage: nerdctl namespace ls [OPTIONS]
Flags:
-q, --quiet
: Only display namespace names
Display the default AppArmor profile "nerdctl-default". Other profiles cannot be displayed with this command.
Usage: nerdctl apparmor inspect
Load the default AppArmor profile "nerdctl-default". Requires root.
Usage: nerdctl apparmor load
List the loaded AppArmor profile
Usage: nerdctl apparmor ls [OPTIONS]
Flags:
-q, --quiet
: Only display volume names--format
: Format the output using the given Go template, e.g,{{json .}}
Unload an AppArmor profile. The target profile name defaults to "nerdctl-default". Requires root.
Usage: nerdctl apparmor unload [PROFILE]
Get real time events from the server.
Usage: nerdctl events [OPTIONS]
Flags:
- ๐ณ
--format
: Format the output using the given Go template, e.g,{{json .}}
Unimplemented docker events
flags: --filter
, --since
, --until
Display system-wide information
Usage: nerdctl info [OPTIONS]
Flags:
- ๐ณ
-f, --format
: Format the output using the given Go template, e.g,{{json .}}
Show the nerdctl version information
Usage: nerdctl version [OPTIONS]
Flags:
- ๐ณ
-f, --format
: Format the output using the given Go template, e.g,{{json .}}
Display a live stream of container(s) resource usage statistics.
NOTE: no support for network I/O on cgroup v2 hosts (yet), see issue #516
Usage: nerdctl stats [flags]
Flags:
- ๐ณ
-a, --all
: Show all containers (default shows just running) - ๐ณ
--format=FORMAT
: Pretty-print images using a Go template, e.g.,{{json .}}
- ๐ณ
--no-stream
: Disable streaming stats and only pull the first result - ๐ณ
--no-trunc
: Do not truncate output
Display the running processes of a container.
Usage: nerdctl top CONTAINER [ps OPTIONS]
Generate the autocompletion script for bash.
Usage: add the following line to ~/.bash_profile
:
source <(nerdctl completion bash)
Or run nerdctl completion bash > /etc/bash_completion.d/nerdctl
as the root.
Generate the autocompletion script for zsh.
Usage: see nerdctl completion zsh --help
Generate the autocompletion script for fish.
Usage: see nerdctl completion fish --help
Generate the autocompletion script for powershell.
Usage: see nerdctl completion powershell --help
Compose
Usage: nerdctl compose [OPTIONS] [COMMAND]
Flags:
- ๐ณ
-f, --file
: Specify an alternate compose file - ๐ณ
-p, --project-name
: Specify an alternate project name
Create and start containers
Usage: nerdctl compose up [OPTIONS] [SERVICE...]
Flags:
- ๐ณ
-d, --detach
: Detached mode: Run containers in the background - ๐ณ
--no-color
: Produce monochrome output - ๐ณ
--no-log-prefix
: Don't print prefix in logs - ๐ณ
--build
: Build images before starting containers. - ๐ค
--ipfs
: Build images with pulling base images from IFPS. See./docs/ipfs.md
for details.
Unimplemented docker-compose up
(V1) flags: --quiet-pull
, --no-deps
, --force-recreate
, --always-recreate-deps
, --no-recreate
,
--no-start
, --abort-on-container-exit
, --attach-dependencies
, --timeout
, --renew-anon-volumes
, --remove-orphans
, --exit-code-from
,
--scale
Unimplemented docker compose up
(V2) flags: --environment
Create and start containers
Usage: nerdctl compose logs [OPTIONS]
Flags:
- ๐ณ
--no-color
: Produce monochrome output - ๐ณ
--no-log-prefix
: Don't print prefix in logs - ๐ณ
--timestamps
: Show timestamps - ๐ณ
--tail
: Number of lines to show from the end of the logs
Unimplemented docker compose build
(V2) flags: --since
, --until
Build or rebuild services.
Usage: nerdctl compose build [OPTIONS]
Flags:
- ๐ณ
--build-arg
: Set build-time variables for services - ๐ณ
--no-cache
: Do not use cache when building the image - ๐ณ
--progress
: Set type of progress output (auto, plain, tty) - ๐ค
--ipfs
: Build images with pulling base images from IFPS. See./docs/ipfs.md
for details.
Unimplemented docker-compose build
(V1) flags: --compress
, --force-rm
, --memory
, --no-rm
, --parallel
, --pull
, --quiet
Remove containers and associated resources
Usage: nerdctl compose down [OPTIONS]
Flags:
- ๐ณ
-v, --volumes
: Remove named volumes declared in the volumes section of the Compose file and anonymous volumes attached to containers
Unimplemented docker-compose down
(V1) flags: --rmi
, --remove-orphans
, --timeout
List containers of services
Usage: nerdctl compose ps
Unimplemented docker-compose ps
(V1) flags: --quiet
, --services
, --filter
, --all
Unimplemented docker compose ps
(V2) flags: --format
, --status
Start read-only local registry backed by IPFS.
See ./docs/ipfs.md
for details.
Usage: nerdctl ipfs registry up [OPTIONS]
Flags:
- ๐ค
--listen-registry
: Address to listen (defaultlocalhost:5050
)
Stop and remove read-only local registry backed by IPFS.
See ./docs/ipfs.md
for details.
Usage: nerdctl ipfs registry down
Serve read-only registry backed by IPFS on localhost.
Use nerdctl ipfs registry up
.
Usage: nerdctl ipfs registry serve [OPTIONS]
Flags:
- ๐ค
--ipfs-address
: Multiaddr of IPFS API (default is pulled from$IPFS_PATH/api
file. If$IPFS_PATH
env var is not present, it defaults to~/.ipfs
). - ๐ค
--listen-registry
: Address to listen (defaultlocalhost:5050
).
- ๐ค ๐ฆ
--address
: containerd address, optionally with "unix://" prefix - ๐ค ๐ฆ
-a
,--host
,-H
: deprecated aliases of--address
- ๐ค ๐ฆ
--namespace
: containerd namespace - ๐ค ๐ฆ
-n
: deprecated alias of--namespace
- ๐ค ๐ฆ
--snapshotter
: containerd snapshotter - ๐ค ๐ฆ
--storage-driver
: deprecated alias of--snapshotter
- ๐ค ๐ฆ
--cni-path
: CNI binary path (default:/opt/cni/bin
) [$CNI_PATH
] - ๐ค ๐ฆ
--cni-netconfpath
: CNI netconf path (default:/etc/cni/net.d
) [$NETCONFPATH
] - ๐ค ๐ฆ
--data-root
: nerdctl data root, e.g. "/var/lib/nerdctl" - ๐ค
--cgroup-manager=(cgroupfs|systemd|none)
: cgroup manager- Default: "systemd" on cgroup v2 (rootful & rootless), "cgroupfs" on v1 rootful, "none" on v1 rootless
- ๐ค
--insecure-registry
: skips verifying HTTPS certs, and allows falling back to plain HTTP
Container management:
-
docker create
-
docker attach
-
docker cp
-
docker diff
-
docker rename
-
docker container prune
-
docker checkpoint *
Image:
-
docker export
anddocker import
-
docker history
-
docker image prune
-
docker trust *
-
docker manifest *
Network management:
docker network connect
docker network disconnect
docker network prune
Registry:
docker search
Compose:
docker-compose config|create|events|exec|images|kill|pause|port|pull|push|restart|rm|run|scale|start|stop|top|unpause
Others:
docker system df
docker system prune
docker context
- Swarm commands are unimplemented and will not be implemented:
docker swarm|node|service|config|secret|stack *
- Plugin commands are unimplemented and will not be implemented:
docker plugin *
Configuration guide:
./docs/registry.md
: Registry authentication (~/.docker/config.json
)
Basic features:
./docs/compose.md
: Compose./docs/rootless.md
: Rootless mode
Advanced features:
./docs/stargz.md
: Lazy-pulling using Stargz Snapshotter./docs/ocicrypt.md
: Running encrypted images./docs/gpu.md
: Using GPUs inside containers./docs/multi-platform.md
: Multi-platform mode
Experimental features:
./docs/experimental.md
: Experimental features./docs/freebsd.md
: Running FreeBSD jails./docs/ipfs.md
: Distributing images on IPFS
Implementation details:
./docs/dir.md
: Directory layout (/var/lib/nerdctl
)