lukesmithxyz / mutt-wizard Goto Github PK
View Code? Open in Web Editor NEWA system for automatically configuring mutt and isync with a simple interface and safe passwords
License: GNU General Public License v3.0
A system for automatically configuring mutt and isync with a simple interface and safe passwords
License: GNU General Public License v3.0
After using the wizard to configure mutt with a Gmail account, the <Gmail alias>.muttrc
file created in ~/.config/mutt/accounts
contains incorrect mailbox names which throw errors when sending mail or changing mailboxes.
Default names don't work but editing the mailbox name in the mappings of ~/.config/mutt/accounts/<Gmail alias>.muttrc
creates new mailboxes which work in mutt.
I ran the config wizard, but no config was written.
The files were generated but .msmtprc and .offlinerc are completely empty and the personal files in .config/mutt/xyz are just filled with the names of the variables.
Might it be user error?? If yes, what could I have done wrong?
OfflineIMAP 6.6.1
Licensed under the GNU GPL v2 or any later version (with an OpenSSL exception)
Account sync athena:
*** Processing account athena
Establishing connection to imap.gmail.com:993
gpg: decryption failed: No secret key
Enter password for account 'athena-remote':
Not exactly sure what's happening here. This is what happens when I open mutt
Error: impossible to build path of 'etc/aliases'.
Error in /home/user/.config/mutt/muttrc, line 8:
source: errors in /home/user/.config/mutt/muttrc
Error: issue converting path to absolute (No such file or directory)Press any key to continue...
Error: issue converting path to absolute (No such file or directory)Error: issue converting path to absolute (No such file or directory)
I tried generating gpg key with gnupg(I am on manjaro linux).
Generated the key but don't really know what to put in the textbox.
Hello everyone, just a heads up for those running mutt-wizard on a more bleeding edge distro, or even on a distro that ships the new OpenSSL version 1.1.1 package.
Update openssl to 1.1.1-1 breaks recognition of imap.gmail.com certificate.
Source
The temporary workaround for offlineimap to continue working (for me) was to set ssl_version=tls1_2 on the remote Repository
Source
It's probably a good idea to wait for this to be patched upstream.
Good luck in the meanwhile guys.
pls consider implementing these feature:
Ctrl-R to mark all as read
macro index \Cr "T~U<enter><tag-prefix><clear-flag>N<untag-pattern>.<enter>" "mark all messages as read"
sync email
macro index O "<shell-escape>offlineimap<enter>" "run offlineimap to sync all mail"
macro index o "<shell-escape>offlineimap -qf INBOX<enter>" "run offlineimap to sync inbox"
copy/move dialogs
macro index C "<copy-message>?<toggle-mailboxes>" "copy a message to a mailbox"
macro index M "<save-message>?<toggle-mailboxes>" "move a message to a mailbox"i
might also be interesting : Viewing HTML https://wiki.archlinux.org/index.php/Mutt#Viewing_HTML and setting up mailcap (both have been implemented in my configs and work great!)
Is there a way to re-scan mailboxes? Am just wondering because some folders from my gmail account are not showing (sent mail, all mail, drafts) I have a mail box labelled [Google] but when i try to open it i get the error msg thats its not a mailbox
This Error occured when im starting to sync the email offlineimap -a Personal
It was worked before on my AntiX Linux, until i moved out to Arch.
Traceback (most recent call last):
File "/usr/bin/offlineimap", line 22, in <module>
oi.run()
File "/usr/lib/python2.7/site-packages/offlineimap/init.py", line 89, in run
options, args = self.__parse_cmd_options()
File "/usr/lib/python2.7/site-packages/offlineimap/init.py", line 265, in __parse_cmd_options
config.set_if_not_exists('general', 'dry-run', 'False')
File "/usr/lib/python2.7/site-packages/offlineimap/CustomConfig.py", line 135, in set_if_not_exists
self.set(section, option, value)
File "/usr/lib/python2.7/ConfigParser.py", line 753, in set
ConfigParser.set(self, section, option, value)
File "/usr/lib/python2.7/ConfigParser.py", line 396, in set
raise NoSectionError(section)
ConfigParser.NoSectionError: No section: 'general'
Getting '/home/guy/.mail/main/main is not a mailbox' error when trying to open synced mailbox.
Based on similar issue #41 , cmd outputs are as follows:
$ ls ~/.mail/daxmoe
'Flat 15' '[Gmail].Drafts' '[Gmail].Sent Mail' '[Gmail].Starred' Health Personal Receipts Work
'[Gmail].Bin' '[Gmail].Important' '[Gmail].Spam' Greenwich INBOX 'Read Later' Travel
$ cat ~/.config/mutt/accounts/daxmoe.muttrc
# vim: filetype=neomuttrc
# muttrc file for account main
set realname = "Guy Edwards"
set from = "[email protected]"
set smtp_url = "smtp://[email protected]@smtp.gmail.com:587/"
set sendmail = "/usr/bin/msmtp -a main"
set folder = "~/.mail/main"
set header_cache = ~/.config/mutt/accounts/main/cache/headers
set message_cachedir = ~/.config/mutt/accounts/main/cache/bodies
set certificate_file = ~/.config/mutt/accounts/main/certificates
source "~/.config/mutt/credentials/getmuttpass main |"
set mbox_type = Maildir
set ssl_starttls = yes
set ssl_force_tls = yes
bind index,pager gg noop
bind index,pager g noop
bind index gg first-entry
unmailboxes *
mailboxes =main =-------------------
set spoolfile = ""
set record = ""
set postponed = ""
$ offlineimap -a main --info
Folderlist:
[Gmail]/All Mail (disabled)
[Gmail]/Bin
[Gmail]/Drafts
[Gmail]/Important
[Gmail]/Sent Mail
[Gmail]/Spam
[Gmail]/Starred
INBOX
Personal
Read Later
Receipts
Travel
Work
Local repository 'main-local': type 'Maildir'
Folderlist:
Read Later
[Gmail].Sent Mail
Receipts
[Gmail].Important
[Gmail].Bin
Travel
Personal
INBOX
[Gmail].Starred
[Gmail].Drafts
Work
[Gmail].Spam
No errors when running offlineimap -a main
.
Any help would be greatly appreciated and thanks for creating mutt-wizard!
Hi, I found that deleted mails are not move to Trash but definitively deleted.
I think it will be a good idea to add trash folder handling by adding
set trash = "+Trash"
at the end of the accounts rc files.
Short intro -> love arch linux, i3, emacs, cli. Been using mu4e for years but multiple email accounts are pain, don't get emacs 'contexts'. Looked for alternative, found mutt, found your script 'mutt-wizard' gave it a try ... no success. I'm not newbee, but not programmer (hydrogeologist by profession, english is still my primary language, not programmer speak..).
Here is my original .offlineimaprc for this account ( I added line numbers for reference):
accounts = frank
maxsyncaccounts = 3
[Account frank]
localrepository = franklocal
remoterepository = frankremote
[Repository franklocal]
type = Maildir
localfolders = /mnt/Maildir/BGM/
[Repository frankremote]
type = IMAP
remoteport = 143
remotehost = imap.**ndwa.com
remoteuser = frank@**ndwa.com
remotepass = *****
ssl = no
maxconnections = 5
realdelete = true
truedelete = True
sslcacertfile = /etc/ssl/certs/180123_**ndwa.com.key
Here is mutt-wizard .offlineimaprc for this account ( I added line numbers for reference):
[general]
accounts = frank
starttls = yes
ssl = yes
pythonfile = ~/.config/mutt/credentials/imappwd.py
[Account frank]
localrepository = frank-local
remoterepository = frank-remote
[Repository frank-remote]
type = IMAP
remoteuser = frank@**ndwa.com
sslcacerfile = /etc/ssl/cets/ca-certificates.crt
remotepasseval = mailpasswd("frank")
remotehost = imap.**ndwa.com
port = 143
sslcacertfile = /etc/ssl/certs/ca-certificates.crt
[Repository frank-local]
type = Maildir
localfolders = ~/.mail/frank
=====================================================
Here are my questions:
A. Line 15 of your file -> 'port = 143', the port number kept coming up 993 until I found this, I changed this to 'remoteport = 143', -> no success
B. Line 12 of your file -> 'sslcacerfile = /etc/ssl/cets/ca-certificates.crt', I think this is an error as there is no file by that name or directory, I removed it -> no success
C. Line 16 of your file -> ' sslcacertfile = /etc/ssl/certs/ca-certificates.crt ' , I already have a certfile for this account, so I replaced this with my account (my Line 19 )->
' sslcacertfile = /etc/ssl/certs/180123_**ndwa.com.key ' -> no success
D. changed lines 03 and 04 to -> ' starttls = no ' and ' ssl = no ' -> no success
I get this error on offlineimap:
OfflineIMAP 7.1.5
Licensed under the GNU GPL v2 or any later version (with an OpenSSL exception)
imaplib2 v2.57 (bundled), Python v2.7.14, OpenSSL 1.1.0g 2 Nov 2017
Account sync frank:
*** Processing account frank
Establishing connection to imap.**ndw.com:143 (frank-remote)
ERROR: Could not connect via SSL to host 'imap.**ndw.com' and non-standard ssl port 143 configured. Make sure you connect to the correct port. Got: [SSL: WRONG_VERSION_NUMBER] wrong version number (_ssl.c:661)
Thanks, any idea what I am doing wrong??
Thanks,
Geoguy
I have tried to the installation of the wizard multiple times and it always get this error:
Computer: MacBook Pro 13-inch, 2017
I have installed all the depencies.
My GPG installation is located at: /usr/local/bin/gpg
I tried to created soft link by doing sudo ln -s /usr/local/bin/gpg /usr/bin/gpg
but I got "Operation not permitted". This seem to be a Mac issue - Cannot create a symlink inside of /usr/bin even as sudo
Whenever I tried to open Mutt, I get this error ~/.mbox: No such file or directory (errno = 2)
Have anyone run into this issue before?
As mutt-wizard is targeted towards newbie users, you might want to add notmuch to the setup/configuration process or at least mentioned it:
https://notmuchmail.org
If notmuch is installed you only need to do the following steps to get a fast email search on your commandline:
notmuch setup && notmuch new
i1-13 works fine but i4-i7 doesn't work for me. I have 7 accounts set up in neomutt using the wizard.
Tried looking in configs but didn't find anything useful. And the keys are also defined in .personal.muttrc.
Behavior: program just stops at the last step. Can't even terminate it with ctrl+c.
It seems that the program gets stuck at detectMailboxes(), because there are user subfolders in account/ and ~/.mail. But apparently, at least in my case, for non-gmail accounts, the offlineimap command from the last function couldn't find any boxes. Maybe that's why it can't get through detecMailboxes().
So i remember on the previous commit, The setup is asking about Gmail SMTP Server name
and Gmail SMTP Port
.
Then after this current version release, The setup doesn't ask you to manually add the SMTP Server name/Port
thing, And so the email refusing to send because of the SASL Auth. So i search around the Internet and finally found the fix.
So incase you have this problem too, just add these line to get it work.
set imap_user = "[email protected]"
set imap_pass = "YourPassword"
set smtp_url = "smtp://[email protected]:587/"
set smtp_pass = "YourPassword"
set from = "[email protected]"
set realname = "John Doe"
The imap protocol use imap-4-utf-7
encoding but offline imap don't decode this to utf-8
.
So folders with special charters look like this: '[Gmail].Messages envoy&AOk-s'
You need to add script like this: https://gist.github.com/declanqian/2e5169660b5a888639ea
in .offlineimaprc pythonfile.
Have fun Mr Smith
I had to do some tweaks to be able to use mutt-wizard and setup offlineimap + neomutt under Qubes OS.
In Qubes OS I'm running SplitGPG which separates the GPG-keys into an own "AppVM".
For further information:
I had to do some changes so that mutt-wizard will use qubes-gpg-client instead of the default gpg2.
Additionally I had to create the encrypted password manually after I've added my email-account via mutt-wizard
qubes-gpg-client -a --encrypt -r ~/.config/mutt/credentials/.gpg
is used to identify the GPG-key you would like to use in the Vault-VM (SplitGPG-repository) and is the name you gave the accont in mutt-wizard.
QUESTION:
how should I contribute as the setup is only for users running Qubes OS and I don't want to "damage" the scripts for all other users.
I'm thinking of adding the information to the qubes-docs repository (?) what do you think?
The following changes have been made to get mutt-wizard working under Qubes:
Hi luke
First off; I'm a big fan of your work. I convincing other colleagues to also use mutt in addition to your wizard. Most of the sysadmin are Linux or Mac users and are eager to try your wizard out.
Anyways I recently changed my password to something containing $ characters. Since the change I was no longer able to send mail. After some digging I found that getmuttpass uses double quotes to set the password.
When I altered the " to ' in getmuttpass, everything worked fine again. I just wanted to let you know.
Thanks again for the great software.
Eli
thanks for the script and the idea to make mutt easier to use for beginners.
I tried to setup neomut using mutt-wizard but run into a problem that I can't run offlineimap after adding my gmail-account and reaching the step:
The account "Gmail" has been added.
Now finalize the installation, do the following:
[...]
I opened a 2nd terminal and entered: offlineimap but run into several error messages:
[user@my-untrusted ~]$ offlineimap
Traceback (most recent call last):
File "/usr/bin/offlineimap", line 23, in
oi.run()
File "/usr/lib/python2.7/site-packages/offlineimap/init.py", line 51, in run
options, args = self.__parse_cmd_options()
File "/usr/lib/python2.7/site-packages/offlineimap/init.py", line 199, in __parse_cmd_options
config.set_if_not_exists('general', 'dry-run', 'False')
File "/usr/lib/python2.7/site-packages/offlineimap/CustomConfig.py", line 132, in set_if_not_exists
self.set(section, option, value)
File "/usr/lib64/python2.7/ConfigParser.py", line 753, in set
ConfigParser.set(self, section, option, value)
File "/usr/lib64/python2.7/ConfigParser.py", line 396, in set
raise NoSectionError(section)
ConfigParser.NoSectionError: No section: 'general'
I thought that mutt-wizard will create the needed configuration files, but ~/.offlineimaprc is an empty file.
Any idea how to proced?
About my system:
I am running Qubes 4rc4 with a Fedora 26 based AppVM.
I have installed neomutt dialog, offlineimap and neomutt using these steps within the default fedora 26 template:
Install offlineimap and dialog:
dnf -y install dialog offlineimap dialog
to install neomutt in fedora:
Link: https://www.neomutt.org/distro/fedora
sudo dnf install dnf-plugins-core
sudo dnf copr enable flatcap/neomutt
sudo dnf -y install neomutt
OFFLINEIMAP:
Version: 6.7.0
DIALOG:
Version: 1.3-20170131
NEOMUTT:
Version: NeoMutt 20171215
System: Linux 4.9.56-21.pvops.qubes.x86_64 (x86_64)
ncurses: ncurses 6.0.20170212 (compiled with 6.0)
libidn: 1.33 (compiled with 1.33)
The script uses /tmp in insecure and possibly destructive ways. Example:
rm -f /tmp/log /tmp/lognew
offlineimap --info -a $1 2&> /tmp/log
If another application or script is using /tmp/log or /tmp/lognew, this may delete another application's data.
Please consider using "mktemp -d" to create your own tmp-directory and use that.
is it possible to turn of the notification sound without removing mpv
or deleting the notify.opus
file?
When I enable autosync using the wizard, it does not automatically receive mails.
The output of systemctl status crond.service
is
● crond.service - Command Scheduler
Loaded: loaded (/usr/lib/systemd/system/crond.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2018-10-14 00:47:27 CEST; 1 weeks 0 days ago
Main PID: 1501 (crond)
Tasks: 1 (limit: 4915)
Memory: 4.7M
CGroup: /system.slice/crond.service
└─1501 /usr/sbin/crond -n
Okt 21 15:23:01 chswb-laptop crond[1501]: sendmail: Account default nicht in /home/chswb/.msmtprc gefunden
which in English would be
● crond.service - Command Scheduler
Loaded: loaded (/usr/lib/systemd/system/crond.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2018-10-14 00:47:27 CEST; 1 weeks 0 days ago
Main PID: 1501 (crond)
Tasks: 1 (limit: 4915)
Memory: 4.7M
CGroup: /system.slice/crond.service
└─1501 /usr/sbin/crond -n
Oct 21 15:23:01 chswb-laptop crond[1501]: sendmail: Account default not found in /home/chswb/.msmtprc
Sending mail in neomutt works, and I can also receive mails by running the mailsync.sh
script manually or pressing o
in neomutt.
(fedora 28, NeoMutt 20180716, msmtp Version 1.6.7, offlineimap 7.1.5)
After running the wizard for the first time, setting up an email account (called daxmoe in this case), and running offlineimap, I'm getting an error within neomutt.
When I launch it, there are no emails to show, and it says "/home/dax/.mail/daxmoe is not a mailbox." at the bottom.
Let me know what other information you need.
have to include
these lines to make it work
[general]
pythonfile = ~/.config/mutt/credentials/imappwd.py
accounts = account1.account2
I have just skimmed over the scripts - but doesn't this
Line 206 in b3122a2
I must be missing something (didn't try to install it)
I have added 2 different Autistici/Inventati accounts using mutt-wizard, but when I go to send an email with either account, the email cannot be sent. Upon pressing the key to send, the bottom of Neomutt says "connecting to smtp.autistici.org..." for about 5 minutes. After this, it says "SMTP session failed: read error". I added a cock.li email using the wizard, and was able to start sending email without any other config.
There is 1 workaround that I know of, which is to comment out the "set smtp_url" line in the account's muttrc file, and then create a ~/.msmtprc file containing something like this:
account myemail
port 587
from [email protected]
user [email protected]
password [password in plain text]
auth on
tls on
tls_starttls on
tls_trust_file /etc/ssl/certs/ca-certificates.crt
host smtp.autistici.org
tls_certcheck on
This is not an ideal solution, since now I have my password in plain text, and my account information is being maintained in another file not controlled by mutt-wizard.
Some other things I tried individually include:
in the "set smtp_url" line of the account's muttrc, change the port number from 465 to 587. This causes me to immediately get a 'SASL authentication failed' when sending.
In the "set sendmail" line of the account's .muttrc, I tried adding the following on the end of the command to match what I have above in the msmtprc: "--tls=on --tls-starttls=on --tls-trust-file=/etc/ssl/certs/ca-certificates.crt --tls-certcheck=on". After adding this, I get the same result where it keeps saying it's connecting for 5 mins.
I know this isn't really a fault of the wizard, but any advice on how I can resolve this in a way that will pull my password from the keyring like everything else?
For us plebs who use Gmail. Perhaps I could do this separately, but I think it would be good to add a note in the README or create a file for special cases like this.
I am having issue when running offlineimap
OfflineIMAP 7.1.5
Licensed under the GNU GPL v2 or any later version (with an OpenSSL exception)
imaplib2 v2.57 (bundled), Python v2.7.10, LibreSSL 2.2.7
ERROR: The account '' does not exist
ERROR: Exceptions occurred during the run!
ERROR: The account '' does not exist
No accounts are defined!
~/.offlineimap
[general]
accounts =
starttls = yes
ssl = yes
pythonfile = ~/.config/mutt/credentials/imappwd.py
[Account gmail]
localrepository = gmail-local
remoterepository = gmail-remote
[Repository gmail-remote]
auth_mechanisms = LOGIN
type = Gmail
remoteuser = [email protected]
sslcacerfile = /etc/ssl/cets/ca-certificates.crt
remotepasseval = mailpasswd("gmail")
remoteport = 993
folderfilter = lambda foldername: foldername not in ['[Gmail]/All Mail']
sslcacertfile = /etc/ssl/certs/ca-certificates.crt
[Repository gmail-local]
type = Maildir
localfolders = ~/.mail/gmail
I've tried to send email via a cock.li email account, although it doesn't seem to actually send an email, it rather just gives me a "Interrupted system call" after 30 seconds of silence. I did make sure that I had msmtp installed.
Started creating a mailbox with the setup script, called the shortname "..gmail"
OfflineImap synced the mailbox correctly, all directories looked ok.
But starting Neomutt, it fails miserably with ".... is not a mailbox"
I scratched my head for a long time and erased all configuration and run it again with a shortname "mhgmail"... and resynced again , and now it works.
If this is a valid issue, create a check in the setup script checking for a dot in the short and reject it.
It would be useful to access google contacts as alias through goobook.
Here is the archwiki entry: https://wiki.archlinux.org/index.php/Mutt#Goobook
I just tried to create an account using mutt-wizard and encountered some problems with my imap and smtp credentials:
First of all there seems to be noway to enter an user name for a mail account. Instead in .offlineimaprc
the email adress is set as remoteuser
, which won't work for any of my mail accounts. The smtp url gets created as smtp://$from@:$smtp_port
($from
and $smtp_port
are entered as the string values, not as variables. I just added them this way to make it more readable) and not as smtp://$smtp_user:$smtp_pass@$smtp_url:$smtp_port
. Changing those settings the correct values manually made everything, so the rest seems to work as expected.
Please specify dialog
dependency, which my Ubuntu 16.04 AWS system actually did not have.
As mutt-wizard is targeted towards new customers the README should mention all packages/applications which are configured in a default installation.
Example: ../etc/mailcap
(...)
text/html; w3m -I %{charset} -T text/html; copiousoutput;
(...)
Thereof w3m should be installed.
Same for mupdf etc.
In my "account-name".muttrc file was the following line:
set spoolfile = "+INBOX"
Somehow mutt is here case sensitive but changing it to
set spoolfile = "+Inbox"
resolved the issue.
(this only happened for my ymail account)
Interestingly enough for my other account it has to be all caps..
When launching mutt I'm getting these errors.
Error in /home/wayne/.config/mutt/accounts/Outlook.muttrc, line 29: +sent-mail: unknown command
Error in /home/wayne/.config/mutt/accounts/Outlook.muttrc, line 30: +Sent: unknown command
Error in /home/wayne/.config/mutt/accounts/Outlook.muttrc, line 32: +Drafts: unknown command
Error in /home/wayne/.config/mutt/personal.muttrc, line 2: source: errors in /home/wayne/.config/mutt/accounts/Outlook.muttrc
Error in /home/wayne/.config/mutt/muttrc, line 7: source: errors in /home/wayne/.config/mutt/personal.muttrc
Error: impossible to build path of 'etc/aliases'.
Error in /home/wayne/.config/mutt/muttrc, line 8:
source: errors in /home/wayne/.config/mutt/muttrc
Error: issue converting path to absolute (No such file or directory)Press any key to continue...
Then once I go ahead and continue it shows all my folders like it should but when I do the keybindings to get to them it is not behaving, saying something either key not bound
or there are no messages
I noticed in the domains.csv file that only SSL is used for imap and STARTTLS for smtp. Are other encryption protocols supported?
I just successfully added one of my accounts using the wizard, but I noticed that when I attempt to send an email, it tries to make the temp file for the email, and I get a permission denied error, leaving me unable to continue with typing my message. When I exit neomutt, I see an error like the following:
sh: /tmp/neomutt-(blah): Permission Denied
I know this isn't an issue with the wizard, but any ideas why this happens? I'm so close to hopefully sending my first email with neomutt, and I'm stuck on this :/
the default configuration from neomutt will not work if you try to use mutt-wizard to connect to Davmail.
Davmail can be used to provide local IMAP and SMTP while beeing connected to a Microsoft Exchange Server.
Thereof it is possible to connect to a recent Microsoft Exchange using neomutt.
This is the setup to get offlineimap sync emails from our exchange server using Davmail.
Most important is to set remoteport entry which must be identical in Davmail.
[general]
ui = ttyui
starttls = no
ssl = no
accounts = workmail
[Account workmail]
localrepository = workmail-Local
remoterepository = workmail-Remote
[Repository workmail-Local]
type = Maildir
localfolders = ~/Mail/workmail
[Repository workmail-Remote]
type = IMAP
remotehost = localhost
remoteuser = <USERNAME>
remotepass = <PASSWORD>
remoteport = 1143
realdelete = no
ssl = no
sslcacertfile = /etc/ssl/certs/ca-certificates.crt
maybe this helps to make mutt-wizard smarter, when running Davmail?
If you run the current version of the installer, you will not get a working config as SSL is enabled and the remoteport is not set correctly.
PR
Hi, is it possible to release mutt-wizard under a free software license?
Hi,
I finished configuring two accounts with the awesome script.
When I start offlineimap to sync the directories, I'm asked to enter the account passwords again, for both the 1und1-account and the GMail-account.
What am I doing wrong? Or is this intended?
gpg2 is installed, a key pair was created before.
`OfflineIMAP 7.1.2
Licensed under the GNU GPL v2 or any later version (with an OpenSSL exception)
imaplib2 v2.57 (system), Python v2.7.14, OpenSSL 1.0.2g 1 Mar 2016
Account sync xxxxxx:
*** Processing account xxxxxx
Establishing connection to imap.1und1.de:993 (xxxxxx-remote)
Enter password for account 'xxxxxx-remote':`
I'm trying to setup mutt with this, however when adding an account .offlineimaprc
, and .msmtprc
config files are beeing created but empty.
I had both msmstp and offlinimap setup before but moved .offlineimaprc
, .offlineimap/
and .msmtprc
out of the way so it would'nt interfere. Is there anything else I must (re)move to make this work?
When you open up mutt, you apparently use your 1st (default) account. And in that default account mutt correctly displays sizes of your mailboxes on sidebar right away. Therefore, it is capable of capturing those sizes while sourcing account's config.
Now you source your 2nd account. And mutt no longer displays correct sizes, except INBOX. It considers the others to be empty until you literally go to them (gs, gt etc.). Moreover, if you go back to your 1st account, the same thing happens: you have to go to corresponding mailboxes to make sure they're non-empty.
I did not succeed in searching for an option which would make it remember contents of the whole tree after sourcing. Obviously, the needed functionality is hidden under the hood. Maybe you have a better understanding of what's happening?
I'm trying to get the wizard to set up neomutt but having trouble with a few parts.
I'm using Arch on this computer. I am getting the error "GPG decryption failed." I did install the newest gnupg v2 and in the /usr/bin I have both gpg and gpg2.
What I have tried:
I moved the gpg to another folder and ln -s /usr/bin/gpg2 /usr/bin/gpg and visa versa. I have also tired to change in the three files gpg2 to gpg with no luck.
I think my problem is where at the beginning where it asks to "insert the email address with which you originally created your GPG key pair..." I don't thing that I actually did. If I did then it might not be finding that file to be able to decrypt.
If that is the case, how can I remake that file to beable to get this working properly? Thank you for your time. Loving the Rice btw. Really nice template to add my own customizations. Thank you.
mailsync.sh will stop with an error on line 14. Presumably because it is a bash specific syntax. I fixed it with changing the head to "#!/bin/bash".
Hello, Protonmail have a bridge now which give you an IMAP and SMTP addrees at 127.0.0.1 but it doesn't seems to work with the wizard. I filled in all of the info and it seems like the bridge doesn't support ssl.
I use macOS Mojave
λ offlineimap
OfflineIMAP 7.2.1
Licensed under the GNU GPL v2 or any later version (with an OpenSSL exception)
imaplib2 v2.57 (bundled), Python v2.7.15, OpenSSL 1.0.2p 14 Aug 2018
Account sync proton:
*** Processing account proton
Establishing connection to 127.0.0.1:1143 (proton-remote)
ERROR: Could not connect via SSL to host '127.0.0.1' and non-standard ssl port 1143 configured. Make sure you connect to the correct port. Got: [SSL: UNKNOWN_PROTOCOL] unknown protocol (_ssl.c:726)
*** Finished account 'proton' in 0:00
ERROR: Exceptions occurred during the run!
ERROR: Could not connect via SSL to host '127.0.0.1' and non-standard ssl port 1143 configured. Make sure you connect to the correct port. Got: [SSL: UNKNOWN_PROTOCOL] unknown protocol (_ssl.c:726)
Traceback:
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/accounts.py", line 283, in syncrunner
self.__sync()
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/accounts.py", line 359, in __sync
remoterepos.getfolders()
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/repository/IMAP.py", line 452, in getfolders
imapobj = self.imapserver.acquireconnection()
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/imapserver.py", line 633, in acquireconnection
exc_info()[2])
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/imapserver.py", line 547, in acquireconnection
af=self.af,
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/imaplibutil.py", line 194, in __init__
super(WrappedIMAP4_SSL, self).__init__(*args, **kwargs)
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/bundled_imaplib2.py", line 2183, in __init__
IMAP4.__init__(self, host, port, debug, debug_file, identifier, timeout, debug_buf_lvl)
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/bundled_imaplib2.py", line 361, in __init__
self.open(host, port)
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/imaplibutil.py", line 202, in open
super(WrappedIMAP4_SSL, self).open(host, port)
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/bundled_imaplib2.py", line 2196, in open
self.ssl_wrap_socket()
File "/usr/local/Cellar/offlineimap/7.2.1/libexec/offlineimap/bundled_imaplib2.py", line 548, in ssl_wrap_socket
self.sock = ssl.wrap_socket(self.sock, self.keyfile, self.certfile, ca_certs=self.ca_certs, cert_reqs=cert_reqs, ssl_version=ssl_version)
File "/usr/local/Cellar/python@2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python2.7/ssl.py", line 949, in wrap_socket
ciphers=ciphers)
File "/usr/local/Cellar/python@2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python2.7/ssl.py", line 617, in __init__
self.do_handshake()
File "/usr/local/Cellar/python@2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/lib/python2.7/ssl.py", line 846, in do_handshake
self._sslobj.do_handshake()
Trying to send out email via GMAIL it seems that there is an issue.
When sending emails from neomutt via my GMAIL account I get the error
No authenticators available
The setup of offlineimap via mutt-wizard worked and offlineimap is working. Sending emails isn't.
I have verified all config files and the part which is handling outgoing emails seems to be:
~/.configure/mutt/accounts/gmail.muttrc
# vim: filetype=neomuttrc
# muttrc file for account gmail
set realname = "gmail"
set from = "[email protected]"
set smtp_url = "smtp://[email protected]@smtp.gmail.com:587/"
set sendmail = "/usr/bin/msmtp -a gmail"
set folder = "~/.mail/gmail"
set header_cache = ~/.config/mutt/accounts/gmail/cache/headers
set message_cachedir = ~/.config/mutt/accounts/gmail/cache/bodies
set certificate_file = ~/.config/mutt/accounts/gmail/certificates
source "~/.config/mutt/credentials/getmuttpass gmail |"
set mbox_type = Maildir
set ssl_starttls = yes
set ssl_force_tls = yes
bind index,pager gg noop
bind index,pager g noop
bind index gg first-entry
unmailboxes *
mailboxes =gmail =------------------- "=[Gmail].Markiert" "=INBOX" "=[Gmail].Spam" "=[Gmail].Entw&APw-rfe$
macro index,pager gi "<change-folder>=INBOX<enter>" "Go to inbox."
macro index,pager gS "<change-folder>=[Gmail].Spam<enter>" "Go to spam."
set spoolfile = "+INBOX"
set record = ""
set postponed = ""
From what I see, mutt-wizzard has configured msmtp to send out email and calls it for the profile gmail...
set sendmail = "/usr/bin/msmtp -a gmail"
... but there is no msmtp configuration file ~/.msmtprc.
QUESTION:
Is this the problem, why sending out emails is not working under Gmail?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.