m2scared / r8168 Goto Github PK
View Code? Open in Web Editor NEWThis project forked from mtorromeo/r8168
Linux device driver for Realtek Ethernet controllers (unofficial mirror)
This project forked from mtorromeo/r8168
Linux device driver for Realtek Ethernet controllers (unofficial mirror)
<Linux device driver for Realtek Ethernet controllers> This is the Linux device driver released for RealTek RTL8168B/8111B, RTL8168C/8111C, RTL8168CP/8111CP, RTL8168D/8111D, RTL8168DP/8111DP, and RTL8168E/8111E Gigabit Ethernet controllers with PCI-Express interface. <Requirements> - Kernel source tree (supported Linux kernel 2.6.x and 2.4.x) - For linux kernel 2.4.x, this driver supports 2.4.20 and latter. - Compiler/binutils for kernel compilation <Quick install with proper kernel settings> Unpack the tarball : # tar vjxf r8168-8.aaa.bb.tar.bz2 Change to the directory: # cd r8168-8.aaa.bb If you are running the target kernel, then you should be able to do : # ./autorun.sh (as root or with sudo) You can check whether the driver is loaded by using following commands. # lsmod | grep r8168 # ifconfig -a If there is a device name, ethX, shown on the monitor, the linux driver is loaded. Then, you can use the following command to activate the ethX. # ifconfig ethX up ,where X=0,1,2,... <Set the network related information> 1. Set manually a. Set the IP address of your machine. # ifconfig ethX "the IP address of your machine" b. Set the IP address of DNS. Insert the following configuration in /etc/resolv.conf. nameserver "the IP address of DNS" c. Set the IP address of gateway. # route add default gw "the IP address of gateway" 2. Set by doing configurations in /etc/sysconfig/network-scripts /ifcfg-ethX for Redhat and Fedora, or /etc/sysconfig/network /ifcfg-ethX for SuSE. There are two examples to set network configurations. a. Fixed IP address: DEVICE=eth0 BOOTPROTO=static ONBOOT=yes TYPE=ethernet NETMASK=255.255.255.0 IPADDR=192.168.1.1 GATEWAY=192.168.1.254 BROADCAST=192.168.1.255 b. DHCP: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes <Modify the MAC address> There are two ways to modify the MAC address of the NIC. 1. Use ifconfig: # ifconfig ethX hw ether YY:YY:YY:YY:YY:YY ,where X is the device number assigned by Linux kernel, and YY:YY:YY:YY:YY:YY is the MAC address assigned by the user. 2. Use ip: # ip link set ethX address YY:YY:YY:YY:YY:YY ,where X is the device number assigned by Linux kernel, and YY:YY:YY:YY:YY:YY is the MAC address assigned by the user. <Force Link Status> 1. Force the link status when insert the driver. If the user is in the path ~/r8168, the link status can be forced to one of the 5 modes as following command. # insmod ./src/r8168.ko speed=SPEED_MODE duplex=DUPLEX_MODE autoneg=NWAY_OPTION ,where SPEED_MODE = 1000 for 1000Mbps = 100 for 100Mbps = 10 for 10Mbps DUPLEX_MODE = 0 for half-duplex = 1 for full-duplex NWAY_OPTION = 0 for auto-negotiation off (true force) = 1 for auto-negotiation on (nway force) For example: # insmod ./src/r8168.ko speed=100 duplex=0 autoneg=1 will force PHY to operate in 100Mpbs Half-duplex(nway force). 2. Force the link status by using ethtool. a. Insert the driver first. b. Make sure that ethtool exists in /sbin. c. Force the link status as the following command. # ethtool -s ethX speed SPEED_MODE duplex DUPLEX_MODE autoneg NWAY_OPTION ,where SPEED_MODE = 1000 for 1000Mbps = 100 for 100Mbps = 10 for 10Mbps DUPLEX_MODE = half for half-duplex = full for full-duplex NWAY_OPTION = off for auto-negotiation off (true force) = on for auto-negotiation on (nway force) For example: # ethtool -s eth0 speed 100 duplex full autoneg on will force PHY to operate in 100Mpbs Full-duplex(nway force). <Jumbo Frame> Transmitting Jumbo Frames, whose packet size is bigger than 1500 bytes, please change mtu by the following command. # ifconfig ethX mtu MTU , where X=0,1,2,..., and MTU is configured by user. RTL8168B/8111B supports Jumbo Frame size up to 4 kBytes. RTL8168C/8111C and RTL8168CP/8111CP support Jumbo Frame size up to 6 kBytes. RTL8168D/8111D supports Jumbo Frame size up to 9 kBytes.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.