madmonkey87 / homeyconz Goto Github PK

View Code? Open in Web Editor NEW

3.0 3.0 14.0 11.63 MB

deCONZ app for Athom Homey smart home controller

JavaScript 20.57% HTML 78.97% CSS 0.46%

homeyconz's People

Contributors

Stargazers

Watchers

Forkers

dijker-nu robertklep matrover sk8er000 tedtolboom zeppdk mickelluiten marcosuurlant realtallmofo timvdhoorn

homeyconz's Issues

Bitron Wandthermostat mit Relais 902010/32

Device name:
Bitron Wandthermostat mit Relais 902010/32

Device link:
https://manuals.smabit.eu/lde/av2010_32.html

Device modelid:
902010/32

Device capabilities:
Heizen/Kühlen/Aus

State report example:

Feature Request: Lampen Aktionskarten mit Übergangszeit erweitern

Bei meinen Hue sowie Innr Lampen ist es möglich Aktionskarten mit einer optionalen und frei definierbaren Übergangszeit ausführen zu lassen.
Bei folgenden Aktionskarten ist das möglich:

Dimmen auf
Relatives Dimmniveau setzen
Den Farbton setzen
Eine Farbe setzen
Eine zufällige Farbe setzen
Die Sättigung setzen
Eine Temperatur setzen

Beispiel:

Welche dieser Aktionskarten verfügbar sind, ist natürlich von der Lampenausführung (16 Mio. Farbe / White Ambiance / nur dimmbar) abhängig.
Diese Aktionskarten stehen sowohl in der Philips Hue App (mit Bridge), als auch in der Philips Hue Zigbee und Innr Lighting Devices App zur Verfügung. Diese Möglichkeit ist also kein Alleinstellungsmerkmal von Philips Hue in Verbindung mit einer Hue Bridge.

Ist es möglich Aktionskarten in der deCONZ App entsprechend zu erweitern?

Cannot connect to deconz [BUG]

Trying to auto discover, but it ends up with an error message.
Trying to set manual config to:
192.168.1.30 Port 40850 websocket port 8081, this also give message error.
If I try again, the app will "unexpectable stop" and I have to deactivate /activate it again to start it.

It's strange cause if I push the request key button without authenticate in phoscon web app I get a message to "open up phoscon and authenticate"
Trying again will give me an error.

I have Hue essential on my phone and I can connect to the gateway with it, so it has connection to my local net.

I run the stick on a LENOVO M93p tiny i5 8GB 128SSD with Home Assistant Supervised on Debian.
Version on Home assistant is core-2021.11.1
Homey is V7.1.6 and deCONZ is v1.27.2

[BUG]

On all my Tuya Blitzwolf smart plugs (model TS011F), the Current divider seems to be wrong; 100 instead of 1000 (value in api in mA).

Example (2.76A should be 0.276A):

Opple Switch not working

Describe the bug:

Opple 3-Switch doesn't work with Conbee II
Switch is registered but it's state is not communicated to Homey.

How to reproduce:

How it should work:

Screenshots:

Additional context:

[DEVICE REQUEST]

Device Name & Manufacturer
Aoetec (SMartthings) water leak sensor

Device Description Link
Phoscon already support this

Device state as reported by deConz
Water leak sensor

Q: Is it possible to poll a specific device every x seconds?

I am having issues with Tuya Smart plugs that do not support reporting. They only update about every 60s or so. Is it possible to configure per-device polling through HomeyConz (for example every 15s), or can/should this only be implemented in the deCONZ api?

Bug: Blinds are not working in Homey after a deCONZ reboot

Describe the bug
My 2 blinds: IKEA Fyrtur and Nexentro Jalousienaktor (https://www.nexentro.de/jalousie/)
are added to deCONZ and working fine using them with the deConz Windows Covering Cluster (Down & UP & Stop)
See Sceenshot
The issue is in Homey.
Both Blinds are not working after a deconz reboot. I must go to the deCONZ App play around with the Windows Covering Cluster and then they work fine in Homey. (reproducable)

Additional I have to restart the Homey Deconz App (after Raspberry Reboot) that they are appear as connected (even after the configured pooling time in the Homey deconz app). Even than I have to play in deconz Windows Covering Cluster that they will work as expected. All other Zigbee Devices working fine as they should even after a deCONZ Reboot

The blinds are connected to the Zigbee Cordinator or Router in all mentioned case
Would be great if you can fix this. Let me know if you need more information

Thanks a lot

Bug

Describe the bug:
IKEA KADRILJ blinds do not work in flows
With a simple flow (trigger = time / action = close, open or dim roller blind) the roller blinds neither close, nor open or move to a dim position. You can hear the motor for a short time, but nothing more happens.
Furthermore, the dimming level cannot be changed manually via the slider in the menu of the device card.
However, by pressing the device card or the button in the device card menu, the blinds can be fully opened or closed.
The blinds cannot be controlled via the Phoscon app either.

How to reproduce:
The misbehavior can be 100% reproduced according to the above description.

How it should work:
Open and close triggered by flows and move to a certain dimming level. Dimming level can be changed via slider.

Screenshots:
Just an example:

Additional context:

[BUG] Status indicators of Vibration sensor don't work

Cannot select a indicator in the menu. Nor does it show a alert when the sensor is moving.

Bug

Describe the bug
A clear and concise description of what the bug is.

To Reproduce
Steps to reproduce the behavior:

Go to '...'
Click on '....'
Scroll down to '....'
See error

Expected behavior
A clear and concise description of what you expected to happen.

Screenshots
If applicable, add screenshots to help explain your problem.

Additional context
Add any other context about the problem here.

Zipato smart water leakage sensor

Device name:
Zipato Smart Water Leakage sensor

Device link:
https://www.zipato.com/product/flood-sensor-zigbee

Device modelid:
HM-HS1WL-M

Device capabilities:
Water leakage

State report example:

Vendor
Zipato
Product
WATER_CTPG
Version2017.4.18
Battery
100
%
Battery
state ok
Water
none
Refreshed
07/02/2020 5:43:37 PM

}
Read more here: https://dresden-elektronik.github.io/deconz-rest-doc/websocket/
--->

No active Alert status displayed on device icon for newly added motion sensors

Describe the bug:

When you add a new Aqara motion sensor, no orange alert indicator is displayed on the device icon when it triggers. The same issue occurs with Aqara Vibration sensors and motion sensors of other brands as well.

How to reproduce:

Add an Aqara motion sensor
Trigger motion
No alert indicator is displayed on the device icon

How it should work:

Screenshots:
Missing:

Additional context:

This still works for existing devices that were added previously. Note: the alert is still shown on the device info page + history, and flows are still triggered.-

hue tap

Describe the bug:
add request for the Philips Hue tap

[FEATURE REQUEST]: Generic Blinds: Adding STOP function as Flow Card action

Is your feature request related to a problem? Please describe.
I cannot stop the blinds with a mapped button, just opening, closing or a concrete position. Stop function is not available as flow card action. Manually I can stop through the device

Describe the solution you'd like
Please add the stop function as flow card action, too

Bug

can't add Aqara Button..

Could you please ad the smoke sensor from Trust

Device name: Trust ZSDR-850 smoke sensor

Device link: https://www.klikaanklikuit.nl/nl/zigbee-smoke-detector.html

Device modelid:

**Device capabilities:Smoke Alarm, Battery Alarm

**

State report example:

Bug

Describe the bug
I try to instal the deCONZ app on Homey Pro, but it fails with the error message "Error: Found a unreachable gateway"

To Reproduce
Steps to reproduce the behavior:

Install deCONZ app
Click on Configure
Click on Discover
See error

Expected behavior
I expect the deCONZ app to be installed

Screenshots

Additional context
Conbee II is on a RPI4. Both RPI4 and Homey Pro are on the same subnet.

[DEVICE REQUEST] Hue wall switch

Device Name & Manufacturer
Hue wall switch

Device Description Link

https://www.philips-hue.com/de-de/p/hue-philips-hue-wall-switch-modul/8719514318045

Device state as reported by deConz

Additional context
More information see:

dresden-elektronik/deconz-rest-plugin#4566

No new devices have been found.

Trying to add "TRÅDFRI open/close switch" as "Tradfri Square Dimmer".
I'm always see: No new devices have been found.
To test deCONZ settings, i was able to add light bulb. But when i add switch, i always see No new devices have been found.
Please help.

        "ep": 1,
        "etag": "344a283de01e40746ff2e31021864a09",
        "lastseen": "2020-06-16T12:33:41.263",
        "manufacturername": "IKEA of Sweden",
        "mode": 1,
        "modelid": "TRADFRI open/close remote",
        "name": "TRADFRI open/close remote ",
        "state": {
            "buttonevent": null,
            "lastupdated": "none"
        },
        "swversion": "2.2.010",
        "type": "ZHASwitch",
        "uniqueid": "00:0d:6f:ff:fe:9a:9a:f5-01-1000"

P.S
I was able to add "TRÅDFRI open/close switch" as "Generic Wireless Switch",
but not "Tradfri Square Dimmer"

P.S.S.
Looks like it's different devices from IKEA, but looks very very similar.
"TRÅDFRI open/close switch" comes with IKEA blinds.
Is it possible to ask you to add this device?

P.S.S.
I tried to use it as "Generic Wireless Switch", but all i get is
release_after_press
release_after_hold
actions. and i get them 8x time each time i press and release.

Bug

Describe the bug:
After the latest Update deconz app keeps chrashing as soon as its startet

How to reproduce:
Start deconz app

How it should work:
Like in the old version of the app

Screenshots:
Not much to see, as it just dies

Additional context:
Homey debug id 1ff4a6d1-dccd-4c2c-81c3-599de19e962b

Bug: groups don’t show up like in de deCONZ gateway interface

Bug

If I add groups made in the DeCONZ interface they will sometimes show as off but the lights in those groups are turned on. So I checked in the webinterface of DeCONZ and there the groups were turned on like it should.

Bug

Describe the bug:
App v1.16.0 is crashing immediately after restart

How to reproduce:
Restart the App and wait couple seconds

How it should work:
like yesterday :-)
5475413d-8c69-4595-9628-5200ce4ee292

The homey app stop working??? e20225c5-078b-47a9-a41e-97ae2be3046f

Describe the bug:

How to reproduce:

How it should work:

Screenshots:

Additional context:

Question

Hi!

Just a question.. I'm running homeyconz allready using this one: https://github.com/fantomnotabene/HomeyCONZ

Is this a clone of that app? Or something really new. Great to see it in the app store now!

The thing I like to know; can I install this app as an update of the one I'm using now? Or do I need to re-add all my devices and re-configure all my flows...

app wont get api key from deconz

Describe the bug:
the homey app wont get an api key from deconz,
i have activated the "authenticate app" button in deconz/phoscon
then pressed the auto discovery in the homey app,
it says "successfully autodiscovered gateway"

but if i try to add a device, it asks me to go to the app settings and fill in all fields,

if i then go to app settings and click advanced, it has found the right IP, and the web port, but dont have the websocket port filled in, or an api key.
i have tried re-installing the app

How to reproduce:
by trying to authenticate again

How it should work:
press authenticate, get positive respons, the all settings auto filled, add devices..

Bug

Describe the bug:
When trying to add the Zipato Leakage sensor, I get «No new device found» ...
Bug... ??

BR
Marius

Friends of Hue (Feller Edizio Due)

Hi, any chance to implement the Feller Switch?
I already posted all Events here:
notabene00/HomeyCONZ#41

Thanks

Bug

Describe the bug:
Tradfri bulb CWS: changing color does not work

How to reproduce:
Select the device and try to change the color

How it should work:
Use xy instead of hue and saturation or use xy in addition to hue and saturation (the latter is what the Phoscon app does) so for a PUT /api//lights//state use e.g.
{"xy":[0.7328473782062022,0.26597735316344395]} or
{"hue":196,"sat":252,"xy":[0.7328473782062022,0.26597735316344395]}
instead of
{"hue":196,"sat":252}

Additional context:
Apparently this bulb only supports xy for setting the color despite the fact that (some older firmware versions at least) report otherwise.
Tested with lamp firmwares 1.3.002 and 1.3.013, deconz 2.05.77 and conbee ii with firmware 0x264a0700

Manual configuration is automatically replaced (by discovery?)

Describe the bug:
Homey deCONZ app suddenly alters ip address. After that I can't connect to any of my devices.
I'm runnig deCONZ in a docker container and what I see is that, after some time, the ip address gets altered to the internal one of the docker container.

How to reproduce:
Steps to reproduce the behaviour:

Install deCONZ into Docker https://hub.docker.com/r/marthoc/deconz
Connect to deCONZ with Homey app
Enter ip address and ports. In my case this is 192.168.0.x or raspberrypi.local
Test connection validity and save
After a while, open Homey deCONZ app again and go to configuration
Ip address is altered to internal Docker ip (172.17.0.3 in my case)

How it should work:
Just keep the manual ip address / domain name that I've entered in the configuration.

Additional context:
It looks like this has something to do with the autodiscover function?

Aqara Vibration sensor: Vibration alarm "last triggered" state resets every few minutes

Describe the bug:

On all Aqara Vibration sensors when I look at the data fields, the "Vibration alarm" state will automatically reset approximately every 10 minutes ("X minutes ago"), even when no vibration alarm was detected. This makes it impossible to see when it last actually triggered if it was for example hours ago. Note: flows trigger correctly only when the alerts is actually triggered, and the history also shows correct alert times. So it seems to be a UI issue.

How to reproduce:

Trigger alert
Keep watching the "Vibration alarm" state
If you wait longer than 10m or so, it will reset automatically to 1 minute
This will continue to happen (Note: flows & history are triggered correctly)

How it should work:

The "Vibration alarm" state should indicate the last time the alarm actually triggered, so if it triggered 55 minutes ago it should display "55 minutes ago" and not reset every 10m.

Screenshots:

The "X minutes ago" will go from 1 - 10m and reset again, even when the last actual alarm was hours ago:

IKEA TRÅDFRI Wireless Open/Close Remote E1766

Device name:
IKEA TRÅDFRI Wireless Open/Close Remote E1766

Device link:
https://www.ikea.com/de/de/manuals/kadrilj-roller-blind-wireless-battery-operated-grey__AA-2172195-2_pub.pdf

Device modelid:
TRADFRI open/close remote

Device capabilities:
up/down (Events 23, 23; acc. to deconz-rest-plugin)

State report example:
I do not know how to provide these informations.
But the remote is already correctly identified by the Phoscon app, so I hope that these data are already publicly available.

Lights not going out in the app and sockets behave strange

The following happend since I'm using version 17.0/17.1

When I turn of a light in the app, it goes back on (in the app) and it keeps thinking that the light is still on. But it isn’t.

So when a next flow is executed to turn the light on, nothing happened, because the app still thinks that the light is allready on.

Also, the sockets from innr in my case go randomly on/off in the app. In real time, nothing happend and there is no flow that triggers this. So something strange is going on..

Support for Xiaomi plug, Xiaomi plug EU and Aqara plug EU with measure_power and meter_power

MadMonkey87,

Thank you for the Homey app and the support.

I have been gathering the information you requested. Since I am not a progammer and it's my first time working on Linux it took me a bit longer. If you need additional info I will do my best.

JSON and Sensor Xiaomi Aqara plugs v1.pdf

Bug: controling temprature when bulbs are in a group is not possible

Describe the bug
Maybe its me, but with the enabling XY color mode on or off (it should be on for those Ikea E27 CWS opal 600lm) the temprature of the lights is not controllable when they are added via an group. individually i can control the temprature in homey.
in the Hue Essentials app i can controll the temprature of the same group.

To Reproduce
Steps to reproduce the behavior:

Add a Deconz group in homey as group
Change the temprature

Expected behavior
Expected to see the whites change temprature

Screenshots
in the app it seems that it works but does nothing

Additional context
in deconz or the Hue essentials app you are able to change the temprature on the same group.

[DEVICE REQUEST] Samsung Smartthings Motion Sensor

If possible please add this so I can use it in Homey

There are also Samsung Smartthings Button and Samsung Smartthings Multipurpose Sensor

https://dresden-elektronik.github.io/deconz-rest-doc/devices/samsung/samjin_button_switch/
https://dresden-elektronik.github.io/deconz-rest-doc/devices/samsung/samjin_multi_sensor/

Should I create Device request for them or ?

Device Name & Manufacturer
They where made by Samsung, but now it is Aeotec that sell the unit

Samsung Smartthings Motion Sensor (but today they are called Aeotec Motion Sensor

Device Description Link
https://aeotec.com/smartthings/zigbee-motion-sensor.html

Device state as reported by deConz
Is this device a light or a sensor resource?
Sensor

sensor resource

{
"config": {
"battery": 81,
"duration": 60,
"enrolled": 1,
"on": true,
"pending": [],
"reachable": true
},
"ep": 1,
"etag": "96c49caaa32d54b9a4e06cf9dd1642d5",
"lastannounced": "2021-09-25T02:10:08Z",
"lastseen": "2021-09-25T05:02Z",
"manufacturername": "Samjin",
"modelid": "motion",
"name": "Samsung Motion Sensor 1",
"state": {
"lastupdated": "2021-09-25T05:03:09.338",
"lowbattery": false,
"presence": true,
"tampered": false
},
"type": "ZHAPresence",
"uniqueid": "28:6d:97:00:01:11:7b:87-01-0500"
}

{
"config": {
"battery": 81,
"offset": 0,
"on": true,
"reachable": true
},
"ep": 1,
"etag": "582adb66fc1a0e21d01997e62d8043c4",
"lastannounced": "2021-09-25T02:10:08Z",
"lastseen": "2021-09-25T05:04Z",
"manufacturername": "Samjin",
"modelid": "motion",
"name": "Samsung Motion Sensor 1",
"state": {
"lastupdated": "2021-09-25T05:02:17.982",
"temperature": 2419
},
"type": "ZHATemperature",
"uniqueid": "28:6d:97:00:01:11:7b:87-01-0402"
}

Dicovery not working at all

I just installed the CONZ app on my Homey and tried the discovery. It comes back with - error:Unable to find a deCONZ gateway. deCONZ app is at v1.11.3 and Homey at 4.2.0. I was able to configure the connection manually with IP address, port and API key which is now available on deCONZ app. Connectivity test runs ok with only one warning re WEBSOCKETS. However the app keeps crashing once I did that. Between crashes I tried adding Philips HUE motion sensor that works ok on deCONZ gateway and Homey app can't find it at all.

Question: color picker

Hey!
Great rewrite of the app and nice additions! In the old app color picker on a light caused crashes for me, so the few color lights I have are added to Homey through Home Assistant instead. I’m test driving your version now to see if it’s worth switching over to your version and rebuilding my flows and re adding devices.
BUT I can’t get color picker to work. Is this still a known issue or am I doing something wrong? :) It’s not crashing, just nothing happens.

1.16.0 App crash

Experienced an app crash immediately after the update to 1.16.0. The stacktrace:

Would be great if you could look into this. Thanks a lot for the effort!

[DEVICE REQUEST]

heiman hs1rc-ef

https://nl.aliexpress.com/item/32892074229.html

Device state as reported by deConz

"manufacturername":"Heiman","mode":1,"modelid":"RC-EF-3.0","state":{"buttonevent":4002,"lastupdated":"2021-04-19T22:09:25.875"},"swversion":"2019.9.10","type":"ZHASwitch","uniqueid":"ec:1b:bd:ff:fe:0f:a7:7d-01-0501"}]}

(There is also 1002, 2002 and 3002 as button event.)

},
"142": {
"config": {
"battery": null,
"on": true,
"reachable": true
},
"ep": 1,
"etag": "d06f52efbd9112d424822113bbace636",
"lastseen": "2021-04-19T22:09Z",
"manufacturername": "Heiman",
"mode": 1,
"modelid": "RC-EF-3.0",
"name": "RC-EF-3.0 142",
"state": {
"buttonevent": 4002,
"lastupdated": "2021-04-19T22:09:25.875"
},
"swversion": "2019.9.10",
"type": "ZHASwitch",
"uniqueid": "ec:1b:bd:ff:fe:0f:a7:7d-01-0501"
}
}
}

From what I know there is no option for long press and double press. Just single press for alle 4 buttons.

Here is some more info: dresden-elektronik/deconz-rest-plugin#3828

It is compatible with home assistant.

Heiman Smoke Sensor not found in Homey

Describe the bug:
I've added a Heiman HS1SA-E smoke sensor to deCONZ (which is not that easy),but Homey doesn't find this sensor when I want to add it. Pretty new to deCONZ so if something is needed please let me know.

Additional context:
The Heiman smoke sensor is only seen via VNC in de deCONZ application, here I manually entered the IAS_CIE_ADDRESS.

[FEATURE REQUEST] Addition of orentation information for Vibration sensor

Would it be possible to add the ‘orientation’ parameters to the aqara vibration sensor? They are available when pulling the rest api.

"9": {
"config": {
"battery": 98,
"on": true,
"pending": [],
"reachable": true,
"sensitivity": 11,
"sensitivitymax": 21,
"temperature": 3200
},
"ep": 1,
"etag": "b8bf66597839bf06bce9c26741292c06",
"lastseen": "2021-08-09T07:39Z",
"manufacturername": "LUMI",
"modelid": "lumi.vibration.aq1",
"name": "Vibration (kt)",
"state": {
"lastupdated": "2021-08-09T07:39:00.221",
"orientation": [
1,
0,
89
],
"tiltangle": 74,
"vibration": false,
"vibrationstrength": 7
},
"swversion": "20180130",
"type": "ZHAVibration",
"uniqueid": "00:15:8d:00:02:af:d4:e8-01-0101"
},

madmonkey87 / homeyconz Goto Github PK

homeyconz's People

Contributors

Stargazers

Watchers

Forkers

homeyconz's Issues

Recommend Projects

Recommend Topics

Recommend Org