When doing OTA with the Emporia component, this is what happens. Will confirm if it's doing it without the emporia component.
[14:01:50][VV][i2c.arduinE (15636) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
[14:01:50]E (15636) task_wdt: - loopTask (CPU 1)
[14:01:50]E (15636) task_wdt: Tasks currently running:
[14:01:50]E (15636) task_wdt: CPU 0: IDLE0
[14:01:50]E (15636) task_wdt: CPU 1: IDLE1
[14:01:50]E (15636) task_wdt: Aborting.
[14:01:50]abort() was called at PC 0x40151034 on core 0
[14:01:50]
[14:01:50]ELF file SHA256: 0000000000000000
[14:01:50]
[14:01:50]Backtrace: 0x40089784:0x3ffbf960 0x40089a01:0x3ffbf980 0x40151034:0x3ffbf9a0 0x40087e25:0x3ffbf9c0 0x40167dc3:0x3ffbc160 0x4015293f:0x3ffbc180 0x4008c2a5:0x3ffbc1a0 0x4008aa12:0x3ffbc1c0
←[33mWARNING Found stack trace! Trying to decode it←[0m
←[33mWARNING Decoded 0x40089784: invoke_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp32/panic.c:715←[0m
←[33mWARNING Decoded 0x40089a01: abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp32/panic.c:715←[0m
←[33mWARNING Decoded 0x40151034: task_wdt_isr at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp32/task_wdt.c:252←[0m
←[33mWARNING Decoded 0x40087e25: _xt_lowint1 at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/xtensa_vectors.S:1154←[0m
←[33mWARNING Decoded 0x40167dc3: esp_pm_impl_waiti at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp32/pm_esp32.c:492←[0m
←[33mWARNING Decoded 0x4015293f: esp_vApplicationIdleHook at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp32/freertos_hooks.c:108←[0m
←[33mWARNING Decoded 0x4008c2a5: prvIdleTask at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/tasks.c:3507←[0m
←[33mWARNING Decoded 0x4008aa12: vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/port.c:355 (discriminator 1)←[0m
[14:01:50]
[14:01:50]Rebooting...
[14:01:50]ets Jun 8 2016 00:22:57
[14:01:50]
[14:01:50]rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
[14:01:50]configsip: 0, SPIWP:0xee
[14:01:50]clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
[14:01:50]mode:DIO, clock div:2
[14:01:50]load:0x3fff0018,len:4
[14:01:50]load:0x3fff001c,len:1044
[14:01:50]load:0x40078000,len:10124
[14:01:50]load:0x40080400,len:5828
[14:01:50]entry 0x400806a8
[14:01:50][E][esp32-hal-misc.c:111] disableCore1WDT(): Failed to remove Core 1 IDLE task from WDT
[14:01:50][I][logger:214]: Log initialized```