makerportal/raspi-thermal-cam

Raspberry Pi Thermal Camera in Real Time with MLX90640 and Python

raspi-thermal-cam's Issues

Could not obtain 0x33 address

After installed all the necessary modules and followed correctly the setup step, I only managed to obtain the addresses as below. I could not obtain 0x33 address. Does anyone know how to encounter this issue or having the same issue?

0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 51 52 53 54 55 56 57 -- -- -- -- -- -- -- --
60: 60 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

Will this work if i2c address of camera is not 33 ?

OSError: [Errno 5] Input/output error

Hi. I download the code and try mlx90640_test.py by modify it for keeping running on my raspberry pi 4 64bit
When it run 818 sec after start ,I got the error 'OSError: [Errno 5] Input/output error '
Do you know how can I fix it?

here is my code:

##################################
# MLX90640 Test with Raspberry Pi
##################################
#
import time,board,busio,os
import numpy as np
import adafruit_mlx90640

t0 =time.time()
i2c = busio.I2C(board.SCL, board.SDA, frequency=400000) # setup I2C
mlx = adafruit_mlx90640.MLX90640(i2c) # begin MLX90640 with I2C comm
mlx.refresh_rate = adafruit_mlx90640.RefreshRate.REFRESH_2_HZ # set refresh rate

frame = np.zeros((24*32,)) # setup array for storing all 768 temperatures
while True:
    try:
        mlx.getFrame(frame) # read MLX temperatures into frame var
        
    except ValueError:
        continue # if error, just read again
    processtime = time.time()-t0
    os.system('clear')
    print('Average MLX90640 Temperature: {0:2.1f}C ({1:2.1f}F)'.\
    format(np.mean(frame),(((9.0/5.0)*np.mean(frame))+32.0)))
    print('processtime: %d sec'%processtime)

and here is the error report
"
Traceback (most recent call last):
File "/home/pi/raspi-thermal-cam/mlx90640_test.py", line 17, in
mlx.getFrame(frame) # read MLX temperatures into frame var
File "/usr/local/lib/python3.9/dist-packages/adafruit_mlx90640.py", line 126, in getFrame
status = self._GetFrameData(mlx90640Frame)
File "/usr/local/lib/python3.9/dist-packages/adafruit_mlx90640.py", line 140, in _GetFrameData
self._I2CReadWords(0x8000, statusRegister)
File "/usr/local/lib/python3.9/dist-packages/adafruit_mlx90640.py", line 828, in _I2CReadWords
i2c.write_then_readinto(
File "/usr/local/lib/python3.9/dist-packages/adafruit_bus_device/i2c_device.py", line 141, in write_then_readinto
self.i2c.writeto_then_readfrom(
File "/usr/local/lib/python3.9/dist-packages/busio.py", line 192, in writeto_then_readfrom
return self._i2c.writeto_then_readfrom(
File "/usr/local/lib/python3.9/dist-packages/adafruit_blinka/microcontroller/generic_linux/i2c.py", line 90, in writeto_then_readfrom
readin = self._i2c_bus.read_i2c_block_data(
File "/usr/local/lib/python3.9/dist-packages/Adafruit_PureIO/smbus.py", line 275, in read_i2c_block_data
ioctl(self._device.fileno(), I2C_RDWR, request)
OSError: [Errno 5] Input/output error
"