marconfus/aionefit

asyncio client for Bosch thermostats

aionefit's Issues

ERROR: No appropriate login method

Hi,

I'm trying to get data from my Logamatic TC100 thermostat. I use the code in client_example.py.
As SERIAL_NUMBER, ACCESS_KEY, PASSWORD i passed the same value I use in MyMode App.
After some issue with SSL connection that I solved I'm now getting the following login problem:

DEBUG xmlstream/_spawn_event : RECV:
INFO mechanisms/_handle_fail : Authentication failed: not-authorized
DEBUG xmlstream/event : Event triggered: failed_auth
ERROR mechanisms/_send_auth : No appropriate login method.
DEBUG xmlstream/event : Event triggered: failed_all_auth
DEBUG xmlstream/send_raw : SEND: </stream:stream>
ERROR stanzabase/exception : Error handling {urn:ietf:params:xml:ns:xmpp-sasl}failure stanza
....

I x-checked login data several time and they are correct.
What's going wrong?

In the aionefit 0.14 library, in the supported hardware I read:
Supported hardware
Nefit Easy (Netherlands)
Junkers Control CT100 (Belgium, Germany)
Buderus Logamatic TC100 (Belgium)
E.L.M. Touch (France)
Worcester Wave (UK)
Bosch Control CT‑100 (Other)

FYI I'm based in Italy. Any limitation?

Use of Http local API for Buderus KM200

Dear,

Buderus KM200 is a gateway for internet communication for buderus heating system. It woks via Xmpp and bosch servers. However there is also a local http api which can be used. Fhem, openhab make use of this local API.
I began myself to try writing python to support it but lack of time and python knowledge blocks me to progress.
As it is now code is working but should be expanded to support all feature, basically add support of all api endpoints
here is the link : https://github.com/moustic999/buderus-client-python

Getting: Using slower stringprep, consider compiling the faster cython/libidn one.

Hi, is it possible to fix this?

ksya/ha-nefiteasy#67 (comment)

add auto-discovery for Thermostat

while reverse-engineering the buderus app, I found that there is a mDNS inside which look for 'iCom' device
I made pull request to enable it in netdisco
home-assistant-libs/netdisco#223
It is not yet accepted as this is very generic.
A good idea would be to check if this mDns also exists on nefit and bosch device, in order to enable on all devices.