martijnpoppen/com.synology.ss

Synology Surveillance Station 2 app for Homey

Surveillance Station

Adds support to Homey for Camera's available in Synology Surveillance Station.

Note

• this app is not officially maintained by Synology.
• You can save your credentials (encrypted) for automatic reconnecting to your Surveillance Station.

com.synology.ss's Issues

request to https

When i try to add synology first in app settings auth failed reason connect econnrefused. How can fix this if I use synology DScam app work same user and password and no have this user 2 fakt auth. I changed the port standerd 5001 and after say this.

how fix this? thanks

Login probleem

Beste Marc,
Ik heb een inlog probleem wat doe ik fout?
Of moet ik nog iets instellen op de server van synology.

Vriendelijke groet.
Rene.

Snapshot no longer available in flow

Hi Marc,
Previously (I don't know which version) it was possible to trigger a snapshot in a flow and send the resulting image as a push notification. In the current version the snapshot action creates a snapshot in Surveillance Station but the resulting image is no longer available as tag in the flow. Therefore, it is no longer possible to sent the image in a push notification. I used this feature for when the door bell was pressed.
I would really appreciate if this feature could be restored.
Regards,
Wouter

Snapshot Option for Flows

Hi Marc,
I would like to ask a quick question.
On the Homey website, a snapshot function is mentioned for this app.
I can see a snapshot clicking on the camera (device icon).
However, I do not see an option to select making a snapshot while making a flow.
Should this be an option? If not; I would like to have it as an option.
Best,
Rob

Adding camera successfull, but no action rules for motion in syn nas

Diagnostic code : d88b6e9c-8420-4cc1-a8d5-cc0845a7d411

Version : 3.0.1
NAS DSM version : 6.2.3-25426 Update 3
Surv. version : 8.2.8-6335
Home 5.0

Synology NAS adding adds two action rules for home on/off, but adding camera does not add any action rules.

Camera does not supply video feed and motion detected

Hi i have 3 cameras in my Surveillance Station
2 work fine, but one was added bit there is no video feed, also motion detection does not work on this one camera.
This is a Foscam FI9900EP.
A Foscam C1 and an Escam (installed as ONVIF) work fine.

Homey White screen

After installing this app, and adding a camera in favorites, my Homey app only shows White screen.. so now my Homey is useless unless i reset it completely.

I cannot remove the app either.

Can you help?

The event of movement on the camera is not working

My flows are no working because the events from my cameras (movement detected) are not triggered.

Disable/enable camera

Disable camera flow does not work me, the cameras is not disbled. I can disable the camera in the Surveillance app without any problem.

Any idea ideas how to troubleshoot?

Is it possible to get the option to disable the certificates check?

Hi there,
So I wanted to connect Homey with the cameras over the local network directly. I'd rather like to avoid the "cloud detour". But for that to work I would need an option to ignore the certificates check as the certs used are only valid when the connection comes by fqdn in my case. That name however is not resolved locally because my router is not capable of such a feature.

So the connection seems to work but the login is rejected because the current certificate cannot be validated by Homey. Would it be possible to add an option in the pairing process to ignore cert failures?

Allow insecure SSL connections

My Synology is not available from the internet, and as such it is also not easily possible to create a long-running SSL certificate, and LetsEncrypt requires exposure to the web. My request would be to add a setting "allow insecure SSL connection" so that I can use the default certificate from Synology. This is better than unencrypted traffic in my home network.

App crash by install

The app immediately indicates after installation that the app has been closed due to a crash.!

DSM 6.2.2-24922 Update 4
Surveillance Station 8.2.6-6009
Homey 3.2.1
app 3.2.0.441

API Login failed

Homey en Synology op hetzelfde netwerk, met of zonder firewall dezelfde melding: API login failed.

Inlog met http, ipnr, poort en juist admin account

Versie surveillance: 8.2.8-6335
Versie DSM: DSM 6.2.3-25426 Update 3

No Connection

Hi,
got my brandnew Homey Pro yesterday and installed all various devices - only one I wasn't able to connect to is my Synology Surveillance Station, trying both the Surveillance Station and Surveillance Station 2 App from Homey. Since my Surveillance Station is working fine and is reachable from within and outside my home via web/smartphone I am not able to see where the problem is located. Using my "yourname.synology.me" (where yourname is my Synology-ID) doesn't work (Timeout) but I can connect by any other means to it no matter what ...

Motion detection not working

Hello, great app btw.
Have installed it since last week, but don't get the motion detection working. If I enable it in the app I get an error " no rule found". If i login onto the dsm dashboard of surveillance station then I see the tasks in the task manager. Further everything else is working well. Already restarted the app, homey and the NAS

Cannot connect Synology NAS or camera's since Homey's update t0 8.1.0

The app has worked perfectly for many years, but I cannot connect Synology NAS or camera's since Homey's update to 8.1.0. I have tried all different kinds of things, but nothing does fix it.

Unsecure connection with Synology

This app connects to the Synology by sending username and password in plain text in the URL query string. Seems highly unsecure! Quite vulnerable, if you ask me.

Error message "... is not in the cert's list"

I get this error message when I try to add a Surveillance Station.

"request to https://192.168.1.1:5001/webapi/auth.cgi failed, reason: Hostname/IP does not match certificate's altnames: IP: 192.168.1.1 is not in the cert's list"

Please advise what could be wrong.

Cannot set HomeMode on or off from a flow

Hi,
I'm having trouble setting HomeMode On or Off from a Honey flow:
cannot read property 'setHomeMode' of undefined
Directly in the app it works.
I'm connected from Homey to my Synology with an admin user and I'm using DSM7.01

Certificaat

Hallo.

Ik heb alles geprobeerd en gezocht maar geen oplossing kunnen vinden. Als ik de gegevens onvoer krijg ik de melding Dat het eerste certificaat niet correct is.

Heb je enig idee wat ik nog kan doen?

Groetjes!

Login problem

Hallo,

Allereerst bedankt voor het maken van deze app👌 waardering voor de tijd en energie die je erin gestoken hebt.

Ik krijg helaas het niet werkend en waarschijnlijk doe ik iets verkeerd. Als ik de synology probeer aan te melden dan geeft ie een melding. De user en password zouden goed moeten zijn, en ik heb het ook geprobeerd door een andere port in te instellen op de nas alleen voor surveillance station. Kan het zijn dat mijn nas te oud is ds112?

Alvast bedankt

Groeten thijs

Status of home mode not reported correctly

This test flow does not report correct status of home mode.

If I open Surveillance Station device and change home mode, the status is reported correct.
But If I change home mode in Surveillance Station Windows Client or with a flow, the status is not reported correctly.

In the Surveillance Station Windows Client I can see that my enable/disable-home-mode-flows are working fine.