Giter Site home page Giter Site logo

termux-adb's Introduction

Termux-ADB

Install ADB & FastBoot Tools in Termux!
For devices with ARM or ARM64 processors only!

How to install

  • Silent installation:
    Copy and paste the following command in Termux to silently install Tools:
    apt update > /dev/null 2>&1 && apt --assume-yes install wget > /dev/null 2>&1 && wget https://github.com/MasterDevX/Termux-ADB/raw/master/InstallTools.sh -q && bash InstallTools.sh
  • Common installation:
    Copy and paste the following command in Termux to install Tools with logs output:
    apt update && apt install wget && wget https://github.com/MasterDevX/Termux-ADB/raw/master/InstallTools.sh && bash InstallTools.sh

How to uninstall

  • Silent uninstallation:
    Copy and paste the following command in Termux to silently remove Tools:
    apt update > /dev/null 2>&1 && apt --assume-yes install wget > /dev/null 2>&1 && wget https://github.com/MasterDevX/Termux-ADB/raw/master/RemoveTools.sh -q && bash RemoveTools.sh
  • Common uninstallation:
    Copy and paste the following command in Termux to remove Tools with logs output:
    apt update && apt install wget && wget https://github.com/MasterDevX/Termux-ADB/raw/master/RemoveTools.sh && bash RemoveTools.sh

Credits

termux-adb's People

Contributors

masterdevx avatar

Stargazers

 avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar

Watchers

 avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar

termux-adb's Issues

Wget issue

CANNOT LINK EXECUTABLE "wget": cannot locate symbol "__aeabi_idiv0" referenced by "/data/data/com.termux/files/usr/bin/wget

adb server versión doest not match client

When running adb devices I received the error:
adb server version (31) doesn't match this client (39); killing.. error: could not install *smartsocket* listener: Address already in use adb server didn't ACK

Already tried: adb kill-server and adb start-server, restarted the device. Did not work.

adb: no devices/emulators found. In termux

i have a problem in termux while runing comand adb shell or something like that because i haved a problem with kali linux and tried do put more Phantom processes with command adb and it say that there are no devices/emulators found i tried to run
adb shell "/system/bin/device_config set_sync_disabled_for_tests persistent; /system/bin/device_config put activity_manager max_phantom_processes 2147483647" but it don't work too i looked a solution but it don't appear how to do it help and have a nice day
android 12
xaomi redmi note 10
no root

> ```adb shell

$ adb shell
error: device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.

Originally posted by @piagzaa24 in #13 (comment)

adb.bin: Bad Address!

Was following this guide: https://www.ytechb.com/enable-color-filter-camera-on-oneplus-8-pro/

And after I´ve installed the F-droid version and updated the packages I managed to install the scripts for the OP8 camera.
But when I try to run the ./camera all I´m getting is:

$ ./camera /data/data/com.termux/files/usr/bin/adb: line 7: /data/data/com.termux/files/usr/bin/adb.bin: Bad address /data/data/com.termux/files/usr/bin/adb: line 7: /data/data/com.termux/files/usr/bin/adb.bin: Bad address /data/data/com.termux/files/usr/bin/adb: line 7: /data/data/com.termux/files/usr/bin/adb.bin: Bad address /data/data/com.termux/files/usr/bin/adb: line 7: /data/data/com.termux/files/usr/bin/adb.bin: Bad address /data/data/com.termux/files/usr/bin/adb: line 7: /data/data/com.termux/files/usr/bin/adb.bin: Bad address /data/data/com.termux/files/usr/bin/adb: line 7: /data/data/com.termux/files/usr/bin/adb.bin: Bad address

CANNOT LINK EXECUTABLE "wget": library "libssl.so.3" not found: needed by main executable

Hi,
I received an error:
CANNOT LINK EXECUTABLE "wget": library "libssl.so.3" not found: needed by main executable
when I tried to install. I installed openssh before, but probably with older library. So I had to run apt upgrade
I'd propose to update (common) installation command to:
apt update && apt install wget && apt upgrade && wget https://github.com/MasterDevX/Termux-ADB/raw/master/InstallTools.sh && bash InstallTools.sh
note: I installed termux less than a month ago, and run apt upgrade in last week or so
out.txt

About x86 ver

when I install it in my android x86. it show

$ adb
/data/data/com.termux/files/usr/bin/adb: line 7: /data/data/com.termux/files/usr/bin/adb.bin: cannot execute binary file: Exec format error

so I wish u can add x86 binary, thanks!!!

Unauthorized device

Trying to connect the localhost and when i run adb devices it says my phone is unauthorized. I can't use any commands like adb shell. What should I do?

Firestick 4k - Connects but ADB Devices is Empty

Thnaks for the code 👍

I am using this on a Firestick4K.
Using PuTTY to connect.
Installation works well and there are no errors at any point.
If I connect to the firestick it states its connected:
But adb devices shows no devices connected:

$ adb connect 192.168.1.10
connected to 192.168.1.10:5555
$ adb devices
List of devices attached
$

nice its work in my termux

i just try it on my termux with redmi 3s device dan realme 5 and the result is good,thanks for this script
Screenshot_2020-08-02-05-26-56-31_84d3000e3f4017145260f7618db1d683

Without the permission of Termux app root ,but I have the adb root permission, Can I use it?

Without the permission of Termux app root ,but I have the adb root permission, Can I use it?

I have a handset with the root permission only for ADB, but Termux(or any android APP) can not obtain the root permission. Could you tell a way to use the adb in termux, I have the root permission of ADB command(by PC). Can I modify some folder permission to achieve the same affect?

How to fix this?

  • daemon not running. starting it now at tcp:5038 *

Thank you for your efforts. :)

How to fix this error?

error: could not install smartsocket listener: Address already in use
ADB server didn't ACK

  • failed to start daemon *
    error: cannot connect to daemon

[Fire TV Stick] Any 'adb' command returns 'Illegal instruction'

I tried both scripts and also added 'apt -y upgrade', without success.
Installation seems to succeed, since it returns:
'Tools were successfully installed!'

When running an adb command (eg. 'adb devices') it returns:
'/data/data/com.termux/files/usr/bin/adb: line 7 9976 Illegal instruction $dir/adb.bin "$@"'

The seconds number '9976' changes from time to time (or on reinstall), but it's always referring to line 7.
Any ideas, if it's an device specific issue or my fault?

Edit:
The issue occurs on an Fire TV Stick (gen. 1).
However, it's working fine on my phone.

Device Not Found

Hey sir,
I want to root my Phone During lockdown no cyber Cafe is open. But i really need root permission on my device i have two mobiles one is android 5 and other one is 7.0 i installed adb on android 5 and connected another device with usb and otg to android 5 and i tried to run "adb devices" its print nothing and when i tried to run "fastboot flash recovery recovery.img" its showing "" please help me. both device are not rooted. Please please please help me

Fastboot issue

The Error is -
$ fastboot
fastboot: usage: no command

I am Enclosing my architecture info.

Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Vendor ID: ARM
Model: 0
Model name: Cortex-A53
Stepping: r0p0
CPU max MHz: 1209.6000
CPU min MHz: 200.0000
BogoMIPS: 38.40
Flags: swp half thumb fastmu
lt vfp edsp neon vfpv
3 tls vfpv4 idiva idi
vt vfpd32 evtstrm

Bad adress

After intall I got this code while trying to start adb by "adb"
`This script will install ADB & FastBoot Tools in Termux.

[] Downloading wrapper script...
[
] Downloading binaries...
[] Copying files to bin...
[
] Setting execution permissions...
[] Creating workspace directory...
[
] Cleaning up...

Tools were successfully installed!

~/adb-fastboot-termux $ adb
/data/data/com.termux/files/usr/bin/adb: line 7: /data/data/com.termux/files/usr/bin/adb.bin: Bad address
~/adb-fastboot-termux $`

ADB Tool Update Needs Fixing

Device is showing that I'm connecting to it yet it says device is offline when attempting to get a shell...
Steps to reproduce

adb tcpip 5555
adb connect ip
"We get a connection"
adb shell
"States the device is offline"...

Any possible fix for this

adb for ArchTermux

How to using adb fastboot with Arch Termux?
With pacman -S android-tools not detect

Device not detected

My phone can't boot now, I want to use fastboot save it.I use otg to connect them.However, the device is not detected.

Pls Specify This Clearly In Readme File!

I came here from this termux issue: https://github.com/termux/termux-packages/issues/478
And i wanna tell you that you should specify about this tool clearly because after reading issues of this script/tool, i get to know that this tool is for running the server and connecting to the external device not the internal where turmux is installed, i also mistaken it as the tool that runs the adb commands for the same device where this turmux is running.
you should specify that if you turn on the tcp connection on other device via pc/mobile(termux) then you will be able to control that and this tool doesn't turns on adb tcp connection where termux is installed means you can not use this script/tool to turn on the adb tcp bridge on the same device where you are using the termux app!

Adb shell command not working

When I open termux (after installing the repositories scripts and adb) and type

adb shell

I get this log and the terminal is back

* daemon not running. starting it now at tcp:5038 *
* daemon started successfully *
error: no devices/emulators found

Any advice ?

ADB error

Please help. When I connect a device, and want to get a screenshot, I get "adb F 03-22 19:15:07 10227 10227 file_sync_client.cpp:503] protocol fault: stat response has wrong message id: 1279869254"
And when I want to see list of apps, I get "error: closed"
Ps. i have restarted the adb server many times. Also does not work almost everything, but the errors are of the same type
Screenshot_20230322-191512
Screenshot_20230322-191524

Can't install

Hi, I tried both slient and common installation. But I get an error saying the metadata integrity can't be verified and the repo is disabled.

Can you please help he?

Thank you!!

Installed in system root

I installed this in Termux then moved it to System since I am a root user on one of my devices. I did this to enable using my routed device as a "PC" via USB on my non rooted daily device. Everything is working as expected except I did not set up the adbkey so it does not hold the connection permission.

I think all I need to do is set this up to finish my setup. The question I have is where to put the adbkey files.

I know that for Termux they are placed in $HOME/adbfiles/. If I mirror this in root/adbfiles/, will it work? Or is there a better way to do this?

Terminal transcript

Welcome to Termux!

Community forum: https://termux.com/community
Gitter chat: https://gitter.im/termux/termux
IRC channel: #termux on libera.chat

Working with packages:

  • Search packages: pkg search
  • Install a package: pkg install
  • Upgrade packages: pkg upgrade

Subscribing to additional repositories:

  • Root: pkg install root-repo
  • X11: pkg install x11-repo

Report issues at https://termux.com/issues

~/downloads $ ~adb open shell cmd exec pkg install android_sdk/platform-tools
No command ~adb found, did you mean:
Command adb in package android-tools
~/downloads $ adb i stal
adb: unknown command i
~/downloads $ adb install pkg android-tools

  • daemon not running; starting now at tcp:5037
    ADB server didn't ACK
    Full server startup log: /data/data/com.termux/files/usr/tmp/adb.10371.log
    Server had pid: 16315
    --- adb starting (pid 16315) ---
    adb I 12-12 03:58:14 16315 16315 main.cpp:63] Android Debug Bridge version 1.0.41
    adb I 12-12 03:58:14 16315 16315 main.cpp:63] Version 31.0.3p1-android-tools
    adb I 12-12 03:58:14 16315 16315 main.cpp:63] Installed as /data/data/com.termux/files/usr/bin/adb
    adb I 12-12 03:58:14 16315 16315 main.cpp:63]
    adb F 12-12 03:58:14 16315 16315 main.cpp:155] could not install smartsocket listener: Address already in use

  • failed to start daemon
    Performing Push Install
    adb: need APK file on command line
    ~/downloads $ adb install pkg android-tools
    NOTICE.txt
    Scan 27 Oct 22 · 05·51·28.pdf
    Terminal transcript.txt
    adb
    android-studio-2021.3.1.17-cros.deb
    ~/downloads $ adb install pkg android-tools Welcome to Termux!

Community forum: https://termux.com/community
Gitter chat: https://gitter.im/termux/termux
IRC channel: #termux on libera.chat

Working with packages:

  • Search packages: pkg search
  • Install a package: pkg install
  • Upgrade packages: pkg upgrade

Subscribing to additional repositories:

  • Root: pkg install root-repo
  • X11: pkg install x11-repo

Report issues at https://termux.com/issues

~/downloads $ ~adb open shell cmd exec pkg install android_sdk/platform-tools
No command ~adb found, did you mean:
Command adb in package android-tools
~/downloads $ adb i stal
adb: unknown command i
~/downloads $ adb install pkg android-tools

  • daemon not running; starting now at tcp:5037
    ADB server didn't ACK
    Full server startup log: /data/data/com.termux/files/usr/tmp/adb.10371.log
    Server had pid: 16315
    --- adb starting (pid 16315) ---
    adb I 12-12 03:58:14 16315 16315 main.cpp:63] Android~/downloads $ adb install pkg android-tools already i

  • daemon not running; starting now at tcp:5037
    ADB server didn't ACK
    Full server startup log: /data/data/com.termux/files/usr/tmp/adb.10371.log
    Server had pid: 16463
    --- adb starting (pid 16463) ---
    adb I 12-12 03:59:51 16463 16463 main.cpp:63] Android Debug Bridge version 1.0.41
    adb I 12-12 03:59:51 16463 16463 main.cpp:63] Version 31.0.3p1-android-tools
    adb I 12-12 03:59:51 16463 16463 main.cpp:63] Installed as /data/data/com.termux/files/usr/bin/adb
    adb I 12-12 03:59:51 16463 16463 main.cpp:63]
    adb F 12-12 03:59:52 16463 16463 main.cpp:155] could not install smartsocket listener: Address already in use

  • failed to start daemon
    Performing Push Install
    adb: need APK file on command line
    Community: command not found
    No command Gitter found, did you mean:
    Command attr in package attr
    Command gitea in package gitea
    Command lexter in package lexter
    Command sorter in package sleuthkit
    Command bibtex in package texlive-bin
    Command setterm in package util-linux
    No command IRC found, did you mean:
    Command ack in package ack-grep
    Command acr in package acr
    Command age in package age
    Command adb in package android-tools
    Command ant in package ant
    Command ab in package apache2
    Command apt in package apt
    Command arj in package arj
    Command a2x in package asciidoc
    Command at in package at
    Command bat in package bat
    Command bc in package bc
    Command bsh in package beanshell
    Command ar in package binutils
    Command bk in package bk
    Command bvi in package bvi
    Command c++ in package clang
    Command ccr in package codecrypt
    Command ctr in package containerd from the root-repo repository
    Command [ in package coreutils
    Command ocs in package cscope
    Command lp in package cups
    Command cvs in package cvs
    Command d8 in package d8
    Command dar in package dar
    Command pub in package dart
    Command sh in package dash
    Command dlv in package delve
    Command cmp in package diffutils
    Command bzz in package djvulibre
    Command dig in package dnsutils
    Command dog in package dog
    Command scp in package dropbear
    Command dtc in package dtc
    Command dte in package dte
    Command duc in package duc
    Command duf in package duf
    Command duk in package duktape
    Command dwm in package dwm from the x11-repo repository
    Command dx in package dx
    Command ecj in package ecj
    Command ecl in package ecl
    Command ed in package ed
    Command eja in package eja
    Command ef in package electric-fence
    Command iex in package elixir
    Command erl in package erlang
    Command et in package et
    Command exa in package exa
    Command fd in package fd
    Command feh in package feh from the x11-repo repository
    Command fzf in package fzf
    Command fzy in package fzy
    Command gac in package gap
    Command dl in package gatling
    Command awk in package gawk
    Command gbt in package gbt
    Command gdb in package gdb
    Command evm in package geth-utils
    Command gh in package gh
    Command gs in package ghostscript
    Command git in package git
    Command gio in package glib-bin
    Command gn in package gn
    Command gpg in package gnupg
    Command go in package golang
    Command gm in package graphicsmagick
    Command dot in package graphviz
    Command eqn in package groff
    Command hx in package helix
    Command hcd in package hfsutils
    Command hub in package hub
    Command i3 in package i3 from the x11-repo repository
    Command ftp in package inetutils
    Command ip in package iproute2
    Command vvp in package iverilog
    Command iw in package iw from the root-repo repository
    Command jo in package jo
    Command joe in package joe
    Command jq in package jq
    Command joe in package jupp
    Command k9s in package k9s
    Command kak in package kakoune
    Command k in package kona
    Command ksu in package krb5
    Command dub in package ldc
    Command lf in package lf
    Command lha in package lhasa
    Command pl in package libgnustep-base
    Command arc in package libpoco
    Command psl in package libpsl
    Command lld in package lld
    Command llc in package llvm
    Command lnd in package lnd
    Command ksh in package loksh
    Command lr in package lr
    Command lrb in package lrzsz
    Command lsd in package lsd
    Command lua in package lua
    Command lyx in package lyx from the x11-repo repository
    Command lz4 in package lz4
    Command m4 in package m4
    Command ali in package mailutils
    Command man in package man
    Command mvn in package maven
    Command mc in package mc
    Command mdp in package mdp
    Command mg in package mg
    Command pee in package moreutils
    Command mpc in package mpc
    Command mpd in package mpd
    Command mpv in package mpv
    Command mpv in package mpv-x from the x11-repo repository
    Command lz in package mtools
    Command mtr in package mtr from the root-repo repository
    Command mu in package mu
    Command mr in package myrepos
    Command tic in package ncurses-utils
    Command ne in package ne
    Command arp in package net-tools
    Command nc in package netcat
    Command nc in package netcat-openbsd
    Command nim in package nim
    Command ali in package nmh
    Command nnn in package nnn
    Command nms in package no-more-secrets
    Command npm in package nodejs
    Command npm in package nodejs-lts
    Command nu in package nushell
    Command nx in package nxengine from the x11-repo repository
    Command o in package o-editor
    Command jar in package openjdk-17
    Command scp in package openssh
    Command 7z in package p7zip
    Command sem in package parallel
    Command gp in package pari
    Command fpp in package pathpicker
    Command php in package php
    Command php in package php7
    Command pil in package picolisp
    Command ode in package plotutils from the x11-repo repository
    Command ps in package procps
    Command cct in package proj
    Command pup in package pup
    Command pv in package pv
    Command qml in package qt5-declarative-dev from the x11-repo repository
    Command moc in package qt5-qtbase from the x11-repo repository
    Command qml in package qt5-qtdeclarative from the x11-repo repository
    Command qev in package qt5-qttools from the x11-repo repository
    Command qjs in package quickjs
    Command r2 in package radare2
    Command ci in package rcs
    Command rc in package rcshell
    Command rem in package remind
    Command icp in package renameutils
    Command rg in package ripgrep
    Command rga in package ripgrep-all
    Command rq in package rq
    Command erb in package ruby
    Command ri in package ruby-ri
    Command sv in package runit
    Command rls in package rust
    Command net in package samba
    Command psc in package sc
    Command srm in package secure-delete
    Command sed in package sed
    Command shc in package shc
    Command ag in package silversearcher-ag
    Command sl in package sl
    Command fls in package sleuthkit
    Command gst in package smalltalk
    Command rec in package sox
    Command st in package st from the x11-repo repository
    Command svn in package subversion
    Command sun in package sun
    Command sr in package surfraw
    Command tar in package tar
    Command ts in package task-spooler
    Command tsh in package teleport-tsh
    Command am in package termux-am
    Command cmd in package termux-tools
    Command ebb in package texlive-bin
    Command tig in package tig
    Command sn in package tin-summer
    Command tf in package tinyfugue
    Command tor in package tor
    Command tsu in package tsu
    Command cal in package util-linux
    Command cu in package uucp
    Command vim in package vim
    Command ex in package vim-gtk from the x11-repo repository
    Command vim in package vim-python
    Command vt in package virustotal-cli
    Command vis in package vis
    Command vtm in package vtm
    Command w3m in package w3m
    Command wg in package wireguard-tools
    Command wol in package wol
    Command wrk in package wrk
    Command x2x in package x2x from the x11-repo repository
    Command xml in package xmlstarlet
    Command X in package xorg-server from the x11-repo repository
    Command twm in package xorg-twm from the x11-repo repository
    Command xev in package xorg-xev from the x11-repo repository
    Command xz in package xz-utils
    Command z3 in package z3
    Command zip in package zip
    Command zsh in package zsh
    Working: command not found
    bash: syntax error near unexpected token newline' bash: syntax error near unexpected token newline'
    NOTICE.txt: command not found
    Subscribing: command not found
    NOTICE.txt: command not found
    NOTICE.txt: command not found
    No command Report found, did you mean:
    Command import in package imagemagick
    bash: /data/data/com.termux/files/home/downloads: Is a directory
    No command No found, did you mean:
    Command go in package golang
    Command jo in package jo
    Command o in package o-editor
    Command co in package rcs
    No command Command found, did you mean:
    Command comsatd in package mailutils
    Command common in package scala
    Command w3mman in package w3m
    bash: /data/data/com.termux/files/home/downloads: Is a directory
    No command adb: found, did you mean:
    Command adb in package android-tools
    bash: /data/data/com.termux/files/home/downloads: Is a directory
    NOTICE.txt: command not found
    No command starting found, did you mean:
    Command strings in package binutils

ADB -H shell install pkg gpg
ADB server didn't ACK
Full server startup log: /data/data/com.termux/files/usr/tmp/adb.10371.log
Server had pid: 16315
--- adb starting (pid 16315) ---
adb I 12-12 03:58:14 16315 16315 main.cpp:63] Android Debug Bridge version 1.0.41
adb I 12-12 03:58:14 16315 16315 main.cpp:63] Version 31.0.3p1-android-tools
adb I 12-12 03:58:14 16315 16315 main.cpp:63] Installed as /data/data/com.termux/files/usr/bin/adb
adb I 12-12 03:58:14 16315 16315 main.cpp:63]
adb F 12-12 03:58:14 16315 16315 main.cpp:155] could not install smartsocket listener: Address already in use

  • failed to start daemon
    Performing Push Install
    adb: need APK file on command line
    ~/downloads $ adb install pkg android-tools
    NOTICE.txt
    Scan 27 Oct 22 · 05·51·28.pdf
    Terminal transcript.txt
    adb
    android-studio-2021.3.1.17-cros.deb
    ~/downloads $ adb install pkg android-tools
    ADB -H shell install pkg gpg gpngx
    No command ADB found, did you mean:
    Command ack in package ack-grep
    Command acr in package acr
    Command age in package age
    Command adb in package android-tools
    Command ant in package ant
    Command ab in package apache2
    Command apt in package apt
    Command arj in package arj
    Command a2x in package asciidoc
    Command at in package at
    Command bat in package bat
    Command bc in package bc
    Command bsh in package beanshell
    Command ar in package binutils
    Command bk in package bk
    Command bvi in package bvi
    Command c++ in package clang
    Command ccr in package codecrypt
    Command ctr in package containerd from the root-repo repository
    Command [ in package coreutils
    Command ocs in package cscope
    Command lp in package cups
    Command cvs in package cvs
    Command d8 in package d8
    Command dar in package dar
    Command pub in package dart
    Command sh in package dash
    Command dlv in package delve
    Command cmp in package diffutils
    Command bzz in package djvulibre
    Command dig in package dnsutils
    Command dog in package dog
    Command scp in package dropbear
    Command dtc in package dtc
    Command dte in package dte
    Command duc in package duc
    Command duf in package duf
    Command duk in package duktape
    Command dwm in package dwm from the x11-repo repository
    Command dx in package dx
    Command ecj in package ecj
    Command ecl in package ecl
    Command ed in package ed
    Command eja in package eja
    Command ef in package electric-fence
    Command iex in package elixir
    Command erl in package erlang
    Command et in package et
    Command exa in package exa
    Command fd in package fd
    Command feh in package feh from the x11-repo repository
    Command fzf in package fzf
    Command fzy in package fzy
    Command gac in package gap
    Command dl in package gatling
    Command awk in package gawk
    Command gbt in package gbt
    Command gdb in package gdb
    Command evm in package geth-utils
    Command gh in package gh
    Command gs in package ghostscript
    Command git in package git
    Command gio in package glib-bin
    Command gn in package gn
    Command gpg in package gnupg
    Command go in package golang
    Command gm in package graphicsmagick
    Command dot in package graphviz
    Command eqn in package groff
    Command hx in package helix
    Command hcd in package hfsutils
    Command hub in package hub
    Command i3 in package i3 from the x11-repo repository
    Command ftp in package inetutils
    Command ip in package iproute2
    Command vvp in package iverilog
    Command iw in package iw from the root-repo repository
    Command jo in package jo
    Command joe in package joe
    Command jq in package jq
    Command joe in package jupp
    Command k9s in package k9s
    Command kak in package kakoune
    Command k in package kona
    Command ksu in package krb5
    Command dub in package ldc
    Command lf in package lf
    Command lha in package lhasa
    Command pl in package libgnustep-base
    Command arc in package libpoco
    Command psl in package libpsl
    Command lld in package lld
    Command llc in package llvm
    Command lnd in package lnd
    Command ksh in package loksh
    Command lr in package lr
    Command lrb in package lrzsz
    Command lsd in package lsd
    Command lua in package lua
    Command lyx in package lyx from the x11-repo repository
    Command lz4 in package lz4
    Command m4 in package m4
    Command ali in package mailutils
    Command man in package man
    Command mvn in package maven
    Command mc in package mc
    Command mdp in package mdp
    Command mg in package mg
    Command pee in package moreutils
    Command mpc in package mpc
    Command mpd in package mpd
    Command mpv in package mpv
    Command mpv in package mpv-x from the x11-repo repository
    Command lz in package mtools
    Command mtr in package mtr from the root-repo repository
    Command mu in package mu
    Command mr in package myrepos
    Command tic in package ncurses-utils
    Command ne in package ne
    Command arp in package net-tools
    Command nc in package netcat
    Command nc in package netcat-openbsd
    Command nim in package nim
    Command ali in package nmh
    Command nnn in package nnn
    Command nms in package no-more-secrets
    Command npm in package nodejs
    Command npm in package nodejs-lts
    Command nu in package nushell
    Command nx in package nxengine from the x11-repo repository
    Command o in package o-editor
    Command jar in package openjdk-17
    Command scp in package openssh
    Command 7z in package p7zip
    Command sem in package parallel
    Command gp in package pari
    Command fpp in package pathpicker
    Command php in package php
    Command php in package php7
    Command pil in package picolisp
    Command ode in package plotutils from the x11-repo repository
    Command ps in package procps
    Command cct in package proj
    Command pup in package pup
    Command pv in package pv
    Command qml in package qt5-declarative-dev from the x11-repo repository
    Command moc in package qt5-qtbase from the x11-repo repository
    Command qml in package qt5-qtdeclarative from the x11-repo repository
    Command qev in package qt5-qttools from the x11-repo repository
    Command qjs in package quickjs
    Command r2 in package radare2
    Command ci in package rcs
    Command rc in package rcshell
    Command rem in package remind
    Command icp in package renameutils
    Command rg in package ripgrep
    Command rga in package ripgrep-all
    Command rq in package rq
    Command erb in package ruby
    Command ri in package ruby-ri
    Command sv in package runit
    Command rls in package rust
    Command net in package samba
    Command psc in package sc
    Command srm in package secure-delete
    Command sed in package sed
    Command shc in package shc
    Command ag in package silversearcher-ag
    Command sl in package sl
    Command fls in package sleuthkit
    Command gst in package smalltalk
    Command rec in package sox
    Command st in package st from the x11-repo repository
    Command svn in package subversion
    Command sun in package sun
    Command sr in package surfraw
    Command tar in package tar
    Command ts in package task-spooler
    Command tsh in package teleport-tsh
    Command am in package termux-am
    Command cmd in package termux-tools
    Command ebb in package texlive-bin
    Command tig in package tig
    Command sn in package tin-summer
    Command tf in package tinyfugue
    Command tor in package tor
    Command tsu in package tsu
    Command cal in package util-linux
    Command cu in package uucp
    Command vim in package vim
    Command ex in package vim-gtk from the x11-repo repository
    Command vim in package vim-python
    Command vt in package virustotal-cli
    Command vis in package vis
    Command vtm in package vtm
    Command w3m in package w3m
    Command wg in package wireguard-tools
    Command wol in package wol
    Command wrk in package wrk
    Command x2x in package x2x from the x11-repo repository
    Command xml in package xmlstarlet
    Command X in package xorg-server from the x11-repo repository
    Command twm in package xorg-twm from the x11-repo repository
    Command xev in package xorg-xev from the x11-repo repository
    Command xz in package xz-utils
    Command z3 in package z3
    Command zip in package zip
    Command zsh in package zsh
    No command Full found, did you mean:
    Command kill in package coreutils
    Command curl in package curl
    Command ul in package util-linux
    No command Server found, did you mean:
    Command sserver in package krb5
    bash: syntax error near unexpected token `('
    adb: unknown command I
    adb: unknown command I
    adb: unknown command I
    adb: unknown command I
    adb: unknown command F
    NOTICE.txt: command not found
    Performing: command not found
    No command adb: found, did you mean:
    Command adb in package android-tools
    bash: /data/data/com.termux/files/home/downloads: Is a directory
    NOTICE.txt: command not found
    No command Scan found, did you mean:
    Command scan in package mailutils
    Command scan in package nmh
    xNo command Terminal found, did you mean:
    Command qterminal in package qterminal from the x11-repo repository
    Android Debug Bridge version 1.0.41
    Version 31.0.3p1-android-tools
    Installed as /data/data/com.termux/files/usr/bin/adb

global options:
-a listen on all network interfaces, not just localhost
-d use USB device (error if multiple devices connected)
-e use TCP/IP device (error if multiple TCP/IP devices available)
-s SERIAL use device with given serial (overrides $ANDROID_SERIAL)
-t ID use device with given transport id
-H name of adb server host [default=localhost]
-P port of adb server [default=5037]
-L SOCKET listen on given socket for adb server [default=tcp:localhost:5037]

general commands:
devices [-l] list connected devices (-l for long output)
help show this help message
version show version num

networking:
connect HOST[:PORT] connect to a device via TCP/IP [default port=5555]
disconnect [HOST[:PORT]]
disconnect from given TCP/IP device [default port=5555], or all
pair HOST[:PORT] [PAIRING CODE]
pair with a device for secure TCP/IP communication
forward --list list all forward socket connections
forward [--no-rebind] LOCAL REMOTE
forward socket connection using:
tcp: ( may be "tcp:0" to pick any open port)
localabstract:
localreserved:
localfilesystem:
dev:
jdwp: (remote only)
vsock:: (remote only)
acceptfd: (listen only)
forward --remove LOCAL remove specific forward socket connection
forward --remove-all remove all forward socket connections
ppp TTY [PARAMETER...] run PPP over USB
reverse --list list all reverse socket connections from device
reverse [--no-rebind] REMOTE LOCAL
reverse socket connection using:
tcp: ( may be "tcp:0" to pick any open port)
localabstract:
localreserved:
localfilesystem:
reverse --remove REMOTE remove specific reverse socket connection
reverse --remove-all remove all reverse socket connections from device
mdns check check if mdns discovery is available
mdns services list all discovered services

file transfer:
push [--sync] [-z ALGORITHM] [-Z] LOCAL... REMOTE
copy local files/directories to device
--sync: only push files that are newer on the host than the device
-n: dry run: push files to device without storing to the filesystem
-z: enable compression with a specified algorithm (any, none, brotli)
-Z: disable compression
pull [-a] [-z ALGORITHM] [-Z] REMOTE... LOCAL
copy files/dirs from device
-a: preserve file timestamp and mode
-z: enable compression with a specified algorithm (any, none, brotli)
-Z: disable compression
sync [-l] [-z ALGORITHM] [-Z] [all|data|odm|oem|product|system|system_ext|vendor]
sync a local build from $ANDROID_PRODUCT_OUT to the device (default all)
-n: dry run: push files to device without storing to the filesystem
-l: list files that would be copied, but don't copy them
-z: enable compression with a specified algorithm (any, none, brotli)
-Z: disable compression

shell:
shell [-e ESCAPE] [-n] [-Tt] [-x] [COMMAND...]
run remote shell command (interactive shell if no command given)
-e: choose escape character, or "none"; default '~'
-n: don't read from stdin
-T: disable pty allocation
-t: allocate a pty if on a tty (-tt: force pty allocation)
-x: disable remote exit codes and stdout/stderr separation
emu COMMAND run emulator console command

app installation (see also adb shell cmd package help):
install [-lrtsdg] [--instant] PACKAGE
push a single package to the device and install it
install-multiple [-lrtsdpg] [--instant] PACKAGE...
push multiple APKs to the device for a single package and install them
install-multi-package [-lrtsdpg] [--instant] PACKAGE...
push one or more packages to the device and install them atomically
-r: replace existing application
-t: allow test packages
-d: allow version code downgrade (debuggable packages only)
-p: partial application install (install-multiple only)
-g: grant all runtime permissions
--abi ABI: override platform's default ABI
--instant: cause the app to be installed as an ephemeral install app
--no-streaming: always push APK to device and invoke Package Manager as separate steps
--streaming: force streaming APK directly into Package Manager
--fastdeploy: use fast deploy
--no-fastdeploy: prevent use of fast deploy
--force-agent: force update of deployment agent when using fast deploy
--date-check-agent: update deployment agent when local version is newer and using fast deploy
--version-check-agent: update deployment agent when local version has different version code and using fast deploy
--local-agent: locate agent files from local source build (instead of SDK location)
(See also adb shell pm help for more options.)
uninstall [-k] PACKAGE
remove this app package from the device
'-k': keep the data and cache directories

debugging:
bugreport [PATH]
write bugreport to given PATH [default=bugreport.zip];
if PATH is a directory, the bug report is saved in that directory.
devices that don't support zipped bug reports output to stdout.
jdwp list pids of processes hosting a JDWP transport
logcat show device log (logcat --help for more)

security:
disable-verity disable dm-verity checking on userdebug builds
enable-verity re-enable dm-verity checking on userdebug builds
keygen FILE
generate adb public/private key; private key stored in FILE,

scripting:
wait-for[-TRANSPORT]-STATE...
wait for device to be in a given state
STATE: device, recovery, rescue, sideload, bootloader, or disconnect
TRANSPORT: usb, local, or any [default=any]
get-state print offline | bootloader | device
get-serialno print
get-devpath print
remount [-R]
remount partitions read-write. if a reboot is required, -R will
will automatically reboot the device.
reboot [bootloader|recovery|sideload|sideload-auto-reboot]
reboot the device; defaults to booting system image but
supports bootloader and recovery too. sideload reboots
into recovery and automatically starts sideload mode,
sideload-auto-reboot is the same but reboots after sideloading.
sideload OTAPACKAGE sideload the given full OTA package
root restart adbd with root permissions
unroot restart adbd without root permissions
usb restart adbd listening on USB
tcpip PORT restart adbd listening on TCP on PORT

internal debugging:
start-server ensure that there is a server running
kill-server kill the server if it is running
reconnect kick connection from host side to force reconnect
reconnect device kick connection from device side to force reconnect
reconnect offline reset offline/unauthorized devices to force reconnect

usb:
attach attach a detached USB device
detach detach from a USB device to allow use by other processes
environment variables:
$ADB_TRACE
comma-separated list of debug info to log:
all,adb,sockets,packets,rwx,usb,sync,sysdeps,transport,jdwp
$ADB_VENDOR_KEYS colon-separated list of keys (files or directories)
$ANDROID_SERIAL serial number to connect to (see -s)
$ANDROID_LOG_TAGS tags to be used by logcat (see logcat --help)
$ADB_LOCAL_TRANSPORT_MAX_PORT max emulator scan port (default 5585, 16 emus)
$ADB_MDNS_AUTO_CONNECT comma-separated list of mdns services to allow auto-connect (default adb-tls-connect)
android-studio-2021.3.1.17-cros.deb: command not found
bash: /data/data/com.termux/files/home/downloads: Is a directory
No command ADB found, did you mean:
Command ack in package ack-grep
Command acr in package acr
Command age in package age
Command adb in package android-tools
Command ant in package ant
Command ab in package apache2
Command apt in package apt
Command arj in package arj
Command a2x in package asciidoc
Command at in package at
Command bat in package bat
Command bc in package bc
Command bsh in package beanshell
Command ar in package binutils
Command bk in package bk
Command bvi in package bvi
Command c++ in package clang
Command ccr in package codecrypt
Command ctr in package containerd from the root-repo repository
Command [ in package coreutils
Command ocs in package cscope
Command lp in package cups
Command cvs in package cvs
Command d8 in package d8
Command dar in package dar
Command pub in package dart
Command sh in package dash
Command dlv in package delve
Command cmp in package diffutils
Command bzz in package djvulibre
Command dig in package dnsutils
Command dog in package dog
Command scp in package dropbear
Command dtc in package dtc
Command dte in package dte
Command duc in package duc
Command duf in package duf
Command duk in package duktape
Command dwm in package dwm from the x11-repo repository
Command dx in package dx
Command ecj in package ecj
Command ecl in package ecl
Command ed in package ed
Command eja in package eja
Command ef in package electric-fence
Command iex in package elixir
Command erl in package erlang
Command et in package et
Command exa in package exa
Command fd in package fd
Command feh in package feh from the x11-repo repository
Command fzf in package fzf
Command fzy in package fzy
Command gac in package gap
Command dl in package gatling
Command awk in package gawk
Command gbt in package gbt
Command gdb in package gdb
Command evm in package geth-utils
Command gh in package gh
Command gs in package ghostscript
Command git in package git
Command gio in package glib-bin
Command gn in package gn
Command gpg in package gnupg
Command go in package golang
Command gm in package graphicsmagick
Command dot in package graphviz
Command eqn in package groff
Command hx in package helix
Command hcd in package hfsutils
Command hub in package hub
Command i3 in package i3 from the x11-repo repository
Command ftp in package inetutils
Command ip in package iproute2
Command vvp in package iverilog
Command iw in package iw from the root-repo repository
Command jo in package jo
Command joe in package joe
Command jq in package jq
Command joe in package jupp
Command k9s in package k9s
Command kak in package kakoune
Command k in package kona
Command ksu in package krb5
Command dub in package ldc
Command lf in package lf
Command lha in package lhasa
Command pl in package libgnustep-base
Command arc in package libpoco
Command psl in package libpsl
Command lld in package lld
Command llc in package llvm
Command lnd in package lnd
Command ksh in package loksh
Command lr in package lr
Command lrb in package lrzsz
Command lsd in package lsd
Command lua in package lua
Command lyx in package lyx from the x11-repo repository
Command lz4 in package lz4
Command m4 in package m4
Command ali in package mailutils
Command man in package man
Command mvn in package maven
Command mc in package mc
Command mdp in package mdp
Command mg in package mg
Command pee in package moreutils
Command mpc in package mpc
Command mpd in package mpd
Command mpv in package mpv
Command mpv in package mpv-x from the x11-repo repository
Command lz in package mtools
Command mtr in package mtr from the root-repo repository
Command mu in package mu
Command mr in package myrepos
Command tic in package ncurses-utils
Command ne in package ne
Command arp in package net-tools
Command nc in package netcat
Command nc in package netcat-openbsd
Command nim in package nim
Command ali in package nmh
Command nnn in package nnn
Command nms in package no-more-secrets
Command npm in package nodejs
Command npm in package nodejs-lts
Command nu in package nushell
Command nx in package nxengine from the x11-repo repository
Command o in package o-editor
Command jar in package openjdk-17
Command scp in package openssh
Command 7z in package p7zip
Command sem in package parallel
Command gp in package pari
Command fpp in package pathpicker
Command php in package php
Command php in package php7
Command pil in package picolisp
Command ode in package plotutils from the x11-repo repository
Command ps in package procps
Command cct in package proj
Command pup in package pup
Command pv in package pv
Command qml in package qt5-declarative-dev from the x11-repo repository
Command moc in package qt5-qtbase from the x11-repo repository
Command qml in package qt5-qtdeclarative from the x11-repo repository
Command qev in package qt5-qttools from the x11-repo repository
Command qjs in package quickjs
Command r2 in package radare2
Command ci in package rcs
Command rc in package rcshell
Command rem in package remind
Command icp in package renameutils
Command rg in package ripgrep
Command rga in package ripgrep-all
Command rq in package rq
Command erb in package ruby
Command ri in package ruby-ri
Command sv in package runit
Command rls in package rust
Command net in package samba
Command psc in package sc
Command srm in package secure-delete
Command sed in package sed
Command shc in package shc
Command ag in package silversearcher-ag
Command sl in package sl
Command fls in package sleuthkit
Command gst in package smalltalk
Command rec in package sox
Command st in package st from the x11-repo repository
Command svn in package subversion
Command sun in package sun
Command sr in package surfraw
Command tar in package tar
Command ts in package task-spooler
Command tsh in package teleport-tsh
Command am in package termux-am
Command cmd in package termux-tools
Command ebb in package texlive-bin
Command tig in package tig
Command sn in package tin-summer
Command tf in package tinyfugue
Command tor in package tor
Command tsu in package tsu
Command cal in package util-linux
Command cu in package uucp
Command vim in package vim
Command ex in package vim-gtk from the x11-repo repository
Command vim in package vim-python
Command vt in package virustotal-cli
Command vis in package vis
Command vtm in package vtm
Command w3m in package w3m
Command wg in package wireguard-tools
Command wol in package wol
Command wrk in package wrk
Command x2x in package x2x from the x11-repo repository
Command xml in package xmlstarlet
Command X in package xorg-server from the x11-repo repository
Command twm in package xorg-twm from the x11-repo repository
Command xev in package xorg-xev from the x11-repo repository
Command xz in package xz-utils
Command z3 in package z3
Command zip in package zip
Command zsh in package zsh
~/downloads $ bugreport
bugreport: command not found
~/downloads $ adb list device
adb: unknown command list
~/downloads $ adb config
adb: unknown command config
~/downloads $ adb cmd
adb: unknown command cmd
~/downloads $ adb help
Android Debug Bridge version 1.0.41
Version 31.0.3p1-android-tools
Installed as /data/data/com.termux/files/usr/bin/adb

global options:
-a listen on all network interfaces, not just localhost
-d use USB device (error if multiple devices connected)
-e use TCP/IP device (error if multiple TCP/IP devices available)
-s SERIAL use device with given serial (overrides $ANDROID_SERIAL)
-t ID use device with given transport id
-H name of adb server host [default=localhost]
-P port of adb server [default=5037]
-L SOCKET listen on given socket for adb server [default=tcp:localhost:5037]

general commands:
devices [-l] list connected devices (-l for long output)
help show this help message
version show version num

networking:
connect HOST[:PORT] connect to a device via TCP/IP [default port=5555]
disconnect [HOST[:PORT]]
disconnect from given TCP/IP device [default port=5555], or all
pair HOST[:PORT] [PAIRING CODE]
pair with a device for secure TCP/IP communication
forward --list list all forward socket connections
forward [--no-rebind] LOCAL REMOTE
forward socket connection using:
tcp: ( may be "tcp:0" to pick any open port)
localabstract:
localreserved:
localfilesystem:
dev:
jdwp: (remote only)
vsock:: (remote only)
acceptfd: (listen only)
forward --remove LOCAL remove specific forward socket connection
forward --remove-all remove all forward socket connections
ppp TTY [PARAMETER...] run PPP over USB
reverse --list list all reverse socket connections from device
reverse [--no-rebind] REMOTE LOCAL
reverse socket connection using:
tcp: ( may be "tcp:0" to pick any open port)
localabstract:
localreserved:
localfilesystem:
reverse --remove REMOTE remove specific reverse socket connection
reverse --remove-all remove all reverse socket connections from device
mdns check check if mdns discovery is available
mdns services list all discovered services

file transfer:
push [--sync] [-z ALGORITHM] [-Z] LOCAL... REMOTE
copy local files/directories to device
--sync: only push files that are newer on the host than the device
-n: dry run: push files to device without storing to the filesystem
-z: enable compression with a specified algorithm (any, none, brotli)
-Z: disable compression
pull [-a] [-z ALGORITHM] [-Z] REMOTE... LOCAL
copy files/dirs from device
-a: preserve file timestamp and mode
-z: enable compression with a specified algorithm (any, none, brotli)
-Z: disable compression
sync [-l] [-z ALGORITHM] [-Z] [all|data|odm|oem|product|system|system_ext|vendor]
sync a local build from $ANDROID_PRODUCT_OUT to the device (default all)
-n: dry run: push files to device without storing to the filesystem
-l: list files that would be copied, but don't copy them
-z: enable compression with a specified algorithm (any, none, brotli)
-Z: disable compression

shell:
shell [-e ESCAPE] [-n] [-Tt] [-x] [COMMAND...]
run remote shell command (interactive shell if no command given)
-e: choose escape character, or "none"; default '~'
-n: don't read from stdin
-T: disable pty allocation
-t: allocate a pty if on a tty (-tt: force pty allocation)
-x: disable remote exit codes and stdout/stderr separation
emu COMMAND run emulator console command

app installation (see also adb shell cmd package help):
install [-lrtsdg] [--instant] PACKAGE
push a single package to the device and install it
install-multiple [-lrtsdpg] [--instant] PACKAGE...
push multiple APKs to the device for a single package and install them
install-multi-package [-lrtsdpg] [--instant] PACKAGE...
push one or more packages to the device and install them atomically
-r: replace existing application
-t: allow test packages
-d: allow version code downgrade (debuggable packages only)
-p: partial application install (install-multiple only)
-g: grant all runtime permissions
--abi ABI: override platform's default ABI
--instant: cause the app to be installed as an ephemeral install app
--no-streaming: always push APK to device and invoke Package Manager as separate steps
--streaming: force streaming APK directly into Package Manager
--fastdeploy: use fast deploy
--no-fastdeploy: prevent use of fast deploy
--force-agent: force update of deployment agent when using fast deploy
--date-check-agent: update deployment agent when local version is newer and using fast deploy
--version-check-agent: update deployment agent when local version has different version code and using fast deploy
--local-agent: locate agent files from local source build (instead of SDK location)
(See also adb shell pm help for more options.)
uninstall [-k] PACKAGE
remove this app package from the device
'-k': keep the data and cache directories

debugging:
bugreport [PATH]
write bugreport to given PATH [default=bugreport.zip];
if PATH is a directory, the bug report is saved in that directory.
devices that don't support zipped bug reports output to stdout.
jdwp list pids of processes hosting a JDWP transport
logcat show device log (logcat --help for more)

security:
disable-verity disable dm-verity checking on userdebug builds
enable-verity re-enable dm-verity checking on userdebug builds
keygen FILE
generate adb public/private key; private key stored in FILE,

scripting:
wait-for[-TRANSPORT]-STATE...
wait for device to be in a given state
STATE: device, recovery, rescue, sideload, bootloader, or disconnect
TRANSPORT: usb, local, or any [default=any]
get-state print offline | bootloader | device
get-serialno print
get-devpath print
remount [-R]
remount partitions read-write. if a reboot is required, -R will
will automatically reboot the device.
reboot [bootloader|recovery|sideload|sideload-auto-reboot]
reboot the device; defaults to booting system image but
supports bootloader and recovery too. sideload reboots
into recovery and automatically starts sideload mode,
sideload-auto-reboot is the same but reboots after sideloading.
sideload OTAPACKAGE sideload the given full OTA package
root restart adbd with root permissions
unroot restart adbd without root permissions
usb restart adbd listening on USB
tcpip PORT restart adbd listening on TCP on PORT

internal debugging:
start-server ensure that there is a server running
kill-server kill the server if it is running
reconnect kick connection from host side to force reconnect
reconnect device kick connection from device side to force reconnect
reconnect offline reset offline/unauthorized devices to force reconnect

usb:
attach attach a detached USB device
detach detach from a USB device to allow use by other processes
environment variables:
$ADB_TRACE
comma-separated list of debug info to log:
all,adb,sockets,packets,rwx,usb,sync,sysdeps,transport,jdwp
$ADB_VENDOR_KEYS colon-separated list of keys (files or directories)
$ANDROID_SERIAL serial number to connect to (see -s)
$ANDROID_LOG_TAGS tags to be used by logcat (see logcat --help)
$ADB_LOCAL_TRANSPORT_MAX_PORT max emulator scan port (default 5585, 16 emus)
$ADB_MDNS_AUTO_CONNECT comma-separated list of mdns services to allow auto-connect (default adb-tls-connect)
~/downloads $ adb nsport
adb: unknown command nsport
~/downloads $ adb -jdwp
adb: unknown command -jdwp
~/downloads $ adb -h usb trace
adb: unknown command -h
~/downloads $ ADB EXEC SHELL AD
No command ADB found, did you mean:
Command ack in package ack-grep
Command acr in package acr
Command age in package age
Command adb in package android-tools
Command ant in package ant
Command ab in package apache2
Command apt in package apt
Command arj in package arj
Command a2x in package asciidoc
Command at in package at
Command bat in package bat
Command bc in package bc
Command bsh in package beanshell
Command ar in package binutils
Command bk in package bk
Command bvi in package bvi
Command c++ in package clang
Command ccr in package codecrypt
Command ctr in package containerd from the root-repo repository
Command [ in package coreutils
Command ocs in package cscope
Command lp in package cups
Command cvs in package cvs
Command d8 in package d8
Command dar in package dar
Command pub in package dart
Command sh in package dash
Command dlv in package delve
Command cmp in package diffutils
Command bzz in package djvulibre
Command dig in package dnsutils
Command dog in package dog
Command scp in package dropbear
Command dtc in package dtc
Command dte in package dte
Command duc in package duc
Command duf in package duf
Command duk in package duktape
Command dwm in package dwm from the x11-repo repository
Command dx in package dx
Command ecj in package ecj
Command ecl in package ecl
Command ed in package ed
Command eja in package eja
Command ef in package electric-fence
Command iex in package elixir
Command erl in package erlang
Command et in package et
Command exa in package exa
Command fd in package fd
Command feh in package feh from the x11-repo repository
Command fzf in package fzf
Command fzy in package fzy
Command gac in package gap
Command dl in package gatling
Command awk in package gawk
Command gbt in package gbt
Command gdb in package gdb
Command evm in package geth-utils
Command gh in package gh
Command gs in package ghostscript
Command git in package git
Command gio in package glib-bin
Command gn in package gn
Command gpg in package gnupg
Command go in package golang
Command gm in package graphicsmagick
Command dot in package graphviz
Command eqn in package groff
Command hx in package helix
Command hcd in package hfsutils
Command hub in package hub
Command i3 in package i3 from the x11-repo repository
Command ftp in package inetutils
Command ip in package iproute2
Command vvp in package iverilog
Command iw in package iw from the root-repo repository
Command jo in package jo
Command joe in package joe
Command jq in package jq
Command joe in package jupp
Command k9s in package k9s
Command kak in package kakoune
Command k in package kona
Command ksu in package krb5
Command dub in package ldc
Command lf in package lf
Command lha in package lhasa
Command pl in package libgnustep-base
Command arc in package libpoco
Command psl in package libpsl
Command lld in package lld
Command llc in package llvm
Command lnd in package lnd
Command ksh in package loksh
Command lr in package lr
Command lrb in package lrzsz
Command lsd in package lsd
Command lua in package lua
Command lyx in package lyx from the x11-repo repository
Command lz4 in package lz4
Command m4 in package m4
Command ali in package mailutils
Command man in package man
Command mvn in package maven
Command mc in package mc
Command mdp in package mdp
Command mg in package mg
Command pee in package moreutils
Command mpc in package mpc
Command mpd in package mpd
Command mpv in package mpv
Command mpv in package mpv-x from the x11-repo repository
Command lz in package mtools
Command mtr in package mtr from the root-repo repository
Command mu in package mu
Command mr in package myrepos
Command tic in package ncurses-utils
Command ne in package ne
Command arp in package net-tools
Command nc in package netcat
Command nc in package netcat-openbsd
Command nim in package nim
Command ali in package nmh
Command nnn in package nnn
Command nms in package no-more-secrets
Command npm in package nodejs
Command npm in package nodejs-lts
Command nu in package nushell
Command nx in package nxengine from the x11-repo repository
Command o in package o-editor
Command jar in package openjdk-17
Command scp in package openssh
Command 7z in package p7zip
Command sem in package parallel
Command gp in package pari
Command fpp in package pathpicker
Command php in package php
Command php in package php7
Command pil in package picolisp
Command ode in package plotutils from the x11-repo repository
Command ps in package procps
Command cct in package proj
Command pup in package pup
Command pv in package pv
Command qml in package qt5-declarative-dev from the x11-repo repository
Command moc in package qt5-qtbase from the x11-repo repository
Command qml in package qt5-qtdeclarative from the x11-repo repository
Command qev in package qt5-qttools from the x11-repo repository
Command qjs in package quickjs
Command r2 in package radare2
Command ci in package rcs
Command rc in package rcshell
Command rem in package remind
Command icp in package renameutils
Command rg in package ripgrep
Command rga in package ripgrep-all
Command rq in package rq
Command erb in package ruby
Command ri in package ruby-ri
Command sv in package runit
Command rls in package rust
Command net in package samba
Command psc in package sc
Command srm in package secure-delete
Command sed in package sed
Command shc in package shc
Command ag in package silversearcher-ag
Command sl in package sl
Command fls in package sleuthkit
Command gst in package smalltalk
Command rec in package sox
Command st in package st from the x11-repo repository
Command svn in package subversion
Command sun in package sun
Command sr in package surfraw
Command tar in package tar
Command ts in package task-spooler
Command tsh in package teleport-tsh
Command am in package termux-am
Command cmd in package termux-tools
Command ebb in package texlive-bin
Command tig in package tig
Command sn in package tin-summer
Command tf in package tinyfugue
Command tor in package tor
Command tsu in package tsu
Command cal in package util-linux
Command cu in package uucp
Command vim in package vim
Command ex in package vim-gtk from the x11-repo repository
Command vim in package vim-python
Command vt in package virustotal-cli
Command vis in package vis
Command vtm in package vtm
Command w3m in package w3m
Command wg in package wireguard-tools
Command wol in package wol
Command wrk in package wrk
Command x2x in package x2x from the x11-repo repository
Command xml in package xmlstarlet
Command X in package xorg-server from the x11-repo repository
Command twm in package xorg-twm from the x11-repo repository
Command xev in package xorg-xev from the x11-repo repository
Command xz in package xz-utils
Command z3 in package z3
Command zip in package zip
Command zsh in package zsh
~/downloads $
~/downloads $

System apps

Is it possible to disable system apps using this? Without root.

server down or wrong source list?

Running the install script in Thermux on my Oneplus 8Pro resolving:

$ apt update && apt install wget && wget https://github.com/MasterDevX/Termux-ADB/raw/master/InstallTools.sh && bash InstallTools.sh
Hit:1 https://packages.termux.org/apt/termux-root root InRelease
Hit:2 https://grimler.se/termux-packages-24 stable InRelease
Ign:3 https://dl.bintray.com/grimler/game-packages-24 games InRelease
Ign:4 https://dl.bintray.com/grimler/science-packages-24 science InRelease
Err:5 https://dl.bintray.com/grimler/game-packages-24 games Release
403 Forbidden
Err:6 https://dl.bintray.com/grimler/science-packages-24 science Release
403 Forbidden
Reading package lists... Done
E: The repository 'https://dl.bintray.com/grimler/game-packages-24 games Release' does not have a Release file.
N: Metadata integrity can't be verified, repository is disabled now.
N: Possible cause: repository is under maintenance or down (wrong sources.list URL?).
E: The repository 'https://dl.bintray.com/grimler/science-packages-24 science Release' does not have a Release file.
N: Metadata integrity can't be verified, repository is disabled now.
N: Possible cause: repository is under maintenance or down (wrong sources.list URL?).
$

Can someone explain?

Devices list empty after running ADB devices

I m trying to get logcat for my app made using kivymd but it is crashing. I don't have a PC therefore I installed termux-adb but after doing all steps I can't find my mobile in List of devices attached it is completely empty. Please help me

Segmentation fault

So this is my second attempt, after having uninstalled and reinstalled Termux, I did this:

Welcome to Termux!

Wiki:            https://wiki.termux.com
Community forum: https://termux.com/community
Gitter chat:     https://gitter.im/termux/termux
IRC channel:     #termux on freenode

Working with packages:

 * Search packages:   pkg search <query>
 * Install a package: pkg install <package>
 * Upgrade packages:  pkg upgrade

Subscribing to additional repositories:

 * Root:     pkg install root-repo
 * Unstable: pkg install unstable-repo
 * X11:      pkg install x11-repo

Report issues at https://termux.com/issues

$ adb
No command adb found, did you mean:
 Command ab in package apache2
 Command gdb in package gdb
$ apt update && apt install wget && wget https://github.com/MasterDevX/Termux-ADB/raw/master/InstallTools.sh && bash InstallTools.shIgn:2 https://dl.bintray.com/grimler/game-packages-24 games InRelease
Ign:3 https://dl.bintray.com/grimler/science-packages-24 science InRelease
Ign:1 https://dl.bintray.com/termux/termux-packages-24 stable InRelease
Get:5 https://dl.bintray.com/grimler/game-packages-24 games Release [5344 B]
Get:6 https://dl.bintray.com/grimler/science-packages-24 science Release [6191 B]
Get:4 https://dl.bintray.com/termux/termux-packages-24 stable Release [8255 B]
Get:7 https://dl.bintray.com/grimler/game-packages-24 games Release.gpg [475 B]
Get:8 https://dl.bintray.com/grimler/science-packages-24 science Release.gpg [475 B]
Get:9 https://dl.bintray.com/termux/termux-packages-24 stable Release.gpg [821 B]
Get:10 https://dl.bintray.com/grimler/game-packages-24 games/stable aarch64 Packages [3991 B]
Get:11 https://dl.bintray.com/grimler/science-packages-24 science/stable aarch64 Packages [8729 B]
Get:12 https://dl.bintray.com/termux/termux-packages-24 stable/main aarch64 Packages [118 kB]
Fetched 153 kB in 2s (53.7 kB/s)
Reading package lists... Done
Building dependency tree... Done
10 packages can be upgraded. Run 'apt list --upgradable' to see them.
Reading package lists... Done
Building dependency tree... Done
The following additional packages will be installed:
  libunistring libuuid pcre2
The following NEW packages will be installed:
  libunistring libuuid pcre2 wget
0 upgraded, 4 newly installed, 0 to remove and 10 not upgraded.
Need to get 1557 kB of archives.
After this operation, 7516 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 https://dl.bintray.com/termux/termux-packages-24 stable/main aarch64 libunistring aarch64 0.9.10-4 [477 kB]
Get:2 https://dl.bintray.com/termux/termux-packages-24 stable/main aarch64 libuuid aarch64 1.0.3-4 [6514 B]
Get:3 https://dl.bintray.com/termux/termux-packages-24 stable/main aarch64 pcre2 aarch64 10.35-1 [813 kB]
Get:4 https://dl.bintray.com/termux/termux-packages-24 stable/main aarch64 wget aarch64 1.20.3-3 [261 kB]
Fetched 1557 kB in 2s (650 kB/s)
Selecting previously unselected package libunistring.
(Reading database ... 3450 files and directories currently installed.)
Preparing to unpack .../libunistring_0.9.10-4_aarch64.deb ...
Unpacking libunistring (0.9.10-4) ...
Selecting previously unselected package libuuid.
Preparing to unpack .../libuuid_1.0.3-4_aarch64.deb ...
Unpacking libuuid (1.0.3-4) ...
Selecting previously unselected package pcre2.
Preparing to unpack .../pcre2_10.35-1_aarch64.deb ...
Unpacking pcre2 (10.35-1) ...
Selecting previously unselected package wget.
Preparing to unpack .../wget_1.20.3-3_aarch64.deb ...
Unpacking wget (1.20.3-3) ...
Setting up libuuid (1.0.3-4) ...
Setting up libunistring (0.9.10-4) ...
Setting up pcre2 (10.35-1) ...
Setting up wget (1.20.3-3) ...
--2020-08-31 14:49:26--  https://github.com/MasterDevX/Termux-ADB/raw/master/InstallTools.sh
Resolving github.com... 140.82.121.4
Connecting to github.com|140.82.121.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/MasterDevX/Termux-ADB/master/InstallTools.sh [following]
--2020-08-31 14:49:26--  https://raw.githubusercontent.com/MasterDevX/Termux-ADB/master/InstallTools.sh
Resolving raw.githubusercontent.com... 151.101.0.133, 151.101.64.133, 151.101.128.133, ...
Connecting to raw.githubusercontent.com|151.101.0.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1128 (1.1K) [text/plain]
Saving to: ‘InstallTools.sh’

InstallTool   0%       0  --.-KB/s          InstallTool 100%   1.10K  --.-KB/s    in 0.003s

2020-08-31 14:49:27 (371 KB/s) - ‘InstallTools.sh’ saved [1128/1128]


This script will install ADB & FastBoot Tools in Termux.

[*] Downloading wrapper script...
[*] Downloading binaries...
[*] Copying files to bin...
[*] Setting execution permissions...
[*] Creating workspace directory...
[*] Cleaning up...

Tools were successfully installed!

$ adb
/data/data/com.termux/files/usr/bin/adb: line 7: 21947 Segmentation fault      $dir/adb.bin "$@"

lscpu output:

Architecture:        aarch64
CPU op-mode(s):      32-bit, 64-bit
Byte Order:          Little Endian
CPU(s):              8
On-line CPU(s) list: 0-7
Thread(s) per core:  1
Core(s) per socket:  2
Socket(s):           3
Vendor ID:           ARM
Model:               0
Model name:          Cortex-A55
Stepping:            r1p0
CPU max MHz:         2600.0000
CPU min MHz:         826.0000
BogoMIPS:            3.84
Flags:               fp asimd evtstrm aes pm
                     ull sha1 sha2 crc32 ato
                     mics fphp asimdhp cpuid
                      asimdrdm lrcpc dcpop a
                     simddp

What am I missing?

$ADB_VENDOR_KEYS is not set

$ adb shell
error: device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.

The fastboot can't use

If I use the fastboot,however,it must say"Segmentation fault",I can't use anything fastboot,please help me

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.