matmurdock/autoproxyswitcher

Automatically exported from code.google.com/p/autoproxyswitcher

autoproxyswitcher's Issues

Identify network by name

I regularly connect to two different Wifi networks, both of which use the 
standard 192.168.1.1 router address, but I need different proxies for them. I'd 
like to identify them by the name they broadcast

Original issue reported on code.google.com by [email protected] on 22 Jan 2015 at 6:38

Ability to disable automatic informational popups

Describe the feature:

It would be nice to be able to set a config flag so that the bubbles to say the 
current active profile has changed, or when the program starts and displays the 
active profile, are not shown to the user.

They would still be accessible from the system tray by clicking the icon for 
debugging purposes, but for some of the novice users (Using this for staff 
within a secondary school in the UK) this can be distracting to them and they 
wouldn't even understand what they were being told.

Original issue reported on code.google.com by [email protected] on 30 Sep 2014 at 2:19

Failing to detect LAN is disconnected

What steps will reproduce the problem?
1.Docked HP laptop. If I disconnect the network cable from the laptop base 
autoproxy detects the change and then says it can still see the LAN IP address 
range. 
2.If I then enable wireless, autoproxy sees the wireless enabled but claims it 
can still see the LAN IP address rangeand therefore tries to use a proxy not 
there. IPCONFIG /ALL shows only the Wireless IP range
3.

What is the expected output? What do you see instead?
Auto switch between lan and wireless

What version of the product are you using?
AutoProxySwitcher_1.0.15.0.msi

What operating system are you using ? Windows 7 64bit enterprise


Please provide any additional information below.

Original issue reported on code.google.com by [email protected] on 12 Feb 2014 at 12:13

The configuration does not take place on start/log in

What steps will reproduce the problem?
1.With the computer off connect the network cable from the network that uses 
the proxy.
2.Start the computer.
3.Log in.

What is the expected output? What do you see instead?
The proxy configuration does not takes place.

Workaround
1.Open Auto Proxy Switcher and click on choose this configuration.
2.Disconnect and reconnect the network cable.

What version of the product are you using?
1.1.5 Beta

What operating system are you using ?
Windows 8.1 Pro x64

Original issue reported on code.google.com by [email protected] on 21 Mar 2014 at 12:11

Dialog to upload new rules.xml

Dialog to upload new rules.xml

Original issue reported on code.google.com by [email protected] on 21 Dec 2014 at 5:23

updates rules from Rules.xml not reflected on the application

What steps will reproduce the problem?
1. Modify rules.xml to add one custom rule
2. Open Autoproxyswitcher
3. check the different options available, only the "Netowrk Names" from the 
modified rules.xml should be dipalayed

What is the expected output? What do you see instead?
Only the "Netowrk Names" from the modified rules.xml should be dipalayed
Seeing the default installation list of proxies/network rules available

What version of the product are you using?
1.1.6.29586

What operating system are you using ?
Win 8

Please provide any additional information below.

Original issue reported on code.google.com by [email protected] on 11 Mar 2015 at 6:30

No automatic switching based on Time interwal

What steps will reproduce the problem?
1.add feature to auto switch on time interwal
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using?


What operating system are you using ?


Please provide any additional information below.
www.gurukpo.com

Original issue reported on code.google.com by [email protected] on 22 Aug 2014 at 4:52

Exception on 64 bits systems and on non Windows 8 systems

no error or warning on install.
on run, some error about failed to open C:\Program Files 
(x86)\AutoProxySwitcher\rules.xml

copy out this file from "Examples" sub-dir and run again give new exception as 
following:

See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.BadImageFormatException: Could not load file or assembly 'SystemProxy, 
Version=1.0.0.18503, Culture=neutral, PublicKeyToken=null' or one of its 
dependencies. An attempt was made to load a program with an incorrect format.
File name: 'SystemProxy, Version=1.0.0.18503, Culture=neutral, 
PublicKeyToken=null'
   at AutoProxySwitcher.NoProxySettings.Configure()
   at AutoProxySwitcher.NetworkChangeDetector.SetProxyAccordingToNetwork()
   at AutoProxySwitcher.SystrayForm.SystrayForm_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value 
[HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure 
logging.
To turn this feature off, remove the registry value 
[HKLM\Software\Microsoft\Fusion!EnableLog].



************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727-5400)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
AutoProxySwitcher
    Assembly Version: 1.0.0.35342
    Win32 Version: 1.0.0.*
    CodeBase: file:///C:/Program%20Files%20(x86)/AutoProxySwitcher/AutoProxySwitcher.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727-5400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727-5400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5458 (Win7SP1GDR.050727-5400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
AutoProxySwitcherLib
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/AutoProxySwitcher/AutoProxySwitcherLib.DLL
----------------------------------------
System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Original issue reported on code.google.com by [email protected] on 12 Jun 2012 at 1:54

Use default configuration until ping complete

Just discovered this program about a week ago, I'm finding it really useful so 
far. Here's something I wish it did:

Describe the feature:
My configuration is set to ping the proxy server in my workplace and if it 
exists then connect to it. This works really well.

The problem arises when I get home: It takes quite a long time to switch the 
proxy settings off again. I believe this is because APS has a relatively high 
timeout value and maybe even makes multiple attempts to ping if the first is 
unsuccessful.

I would like APS to switch to my default profile before starting the ping, and 
then switch to the proxy profile iff the ping is successful. Current behaviour 
is (I believe) dependant on which setting was enabled previously, which doesn't 
suit me as I alternate connections.

Original issue reported on code.google.com by [email protected] on 1 May 2014 at 10:57

Possibility to include specific exceptions for each proxy

Describe the feature:

Is there a possibility to include an exception string ("do not use proxy server 
for addresses beginning with....") in the config file for each proxy?

Thanks,
Jan

Original issue reported on code.google.com by [email protected] on 20 Sep 2013 at 9:26

request MAC recognition

ability to recognise a network by the MAC address of an IP.

i.e.
I have a locked down network.  It has the same net/subnet as other networks i 
use.  The only 2 ways i can tell them apart are the MAC of the proxy server or 
if traffic moves with/without proxy settings.

Original issue reported on code.google.com by [email protected] on 21 Dec 2014 at 5:22

Wrong netmask prefix calculation?

What steps will reproduce the problem?
1. Use subnet mask 255.255.252.0.
2. Configure rules.xml to use PAC file with specified subnet IP:
...
 <Network name="At work">
    <Proxy type="PacFile" url="http://link.to.pac" />
    <Rules>
      <Subnet ip="23.98.176.0/22" />
    </Rules>
  </Network>
...

3. Start Autoproxyswitcher

What is the expected output? What do you see instead?
Match proxy configuration and use PAC file according to Subnet IP with mask. 
Autoproxyswitcher doesn't detect it but uses default conf. In log I see wrong 
subnet prefix - 23 instead of 22:
2013-06-11 11:15:38,534 [1] INFO  AutoProxySwitcherLib.NetworkChangeDetector 
[(null)] - Checking network: Local Area Connection (IP: 23.98.176.0/23, DNS: 
***REMOVED***)

What version of the product are you using? On what operating system?
AutoProxySwitcher_1.0.14.0_beta.msi

Please provide any additional information below.
(numbers were changed due to security, class stays the same)

Original issue reported on code.google.com by [email protected] on 11 Jun 2013 at 1:35

Add support for the Proxy Override

It's good to have support do add different proxy overrides on each proxy.

Original issue reported on code.google.com by [email protected] on 21 Mar 2014 at 2:01

VPN support

When working from home I use a VPN tunnel to connect to the corporate network. 
When I connect using the corporate VPN software, autoproxyswitcher detects 
network changes (I can see the autoproxyswitcher balloons) but is doesn't 
detect the change to the VPN.

Anyway what i would like to happen is: 
1) When connected at home and no VPN use "no proxy" setting,
2) When connected at home and using VPN, use corporate proxy settings
3) When disconnecting from VPN use the "no proxy" setting again.

How can this be accomplished ?

Original issue reported on code.google.com by [email protected] on 10 Apr 2014 at 8:24

Proxy switch based on ping or accessing web page

Hello.

I would like to ask you if it's possible to add the rules section based on ping 
of server. For example: 

  <Rules>
      <Ping ip="8.8.8.8" />
  </Rules>

-> If the server is (not) accessible "pingable" it will chose the particular 
proxy profile.

I'm using the virtual machine running on my laptop and it always has the same 
DNS/IP/Subnet given by my laptop - which is acting like DNS/DHCP server. It 
doesn't matter if I'm at home/work it's still the same.

-> But I can ping the different server at work and different at home - which 
can help me to determine where the laptop is located.

Thank you

PetrR

Original issue reported on code.google.com by [email protected] on 7 Sep 2013 at 10:20

Run as a service?

Hi,

Is there any chance that this application can run as a service for all users? 
It would be really handy as at the moment I need to put a link to the the 
software into the startup of every user.

Graeme

Original issue reported on code.google.com by [email protected] on 13 Mar 2014 at 10:47

Switching from PAC to standard proxy doesn't clear PAC URL (only disables it)

What steps will reproduce the problem?
1. Setup a rule where PAC file is used.
2. Setup another rule where standard proxy is used.
3. Switch networks such as the 2nd rule takes place over the first (standard 
proxy instead of PAC file).

What is the expected output? What do you see instead?
Expected: The current PAC configuration should be disabled and the PAC URL 
should be cleared (buggy software sometimes use this configuration despite 
being disabled).
Current behavior: The PAC configuration is just disabled and the configured 
value is not cleared.

What version of the product are you using?
1.0.0.40672

What operating system are you using ?
Windows 7 Professional x64

Please provide any additional information below.
Please clear the PAC URL field when switching to standard proxy.

Original issue reported on code.google.com by [email protected] on 11 Sep 2014 at 3:20

Set a config to change the values on winhttp

The proxy setting are not only on IE or registry.
Some applications (windows update) or services rely on winhttp
you can see the setting on cmd.exe
netsh winhttp show proxy

If you want to copy the proxy setting to this you can use the command:
Netsh winhttp import proxy source=ie

I used this command manually and it worked fine.

See more on:
http://answers.oreilly.com/topic/1391-how-to-configure-windows-update-to-use-a-p
roxy-server/

Original issue reported on code.google.com by [email protected] on 21 Mar 2014 at 3:24

Is there a way to set the IE equivalent tick box of "Bypass proxy server for local addresses"?

 Is there a way to set the IE equivalent tick box of "Bypass proxy server for local addresses"?


What version of the product are you using? On what operating system?
1.1 Beta

Original issue reported on code.google.com by [email protected] on 12 Nov 2013 at 11:13

WiFi autoswitch

Describe the feature:

Is there a rule to autoswitch proxy depending on connected WiFi network?

Original issue reported on code.google.com by [email protected] on 23 Jul 2013 at 9:11

Trouble detecting network

Hi,

I stumbled on this autoproxyswitcher on Friday after trying a heap of others, 
this is exactly what I need. 

I am having trouble trying to get the autoproxy switcher to detect any subnets 
and therefore I always get the default proxy. I know my entries are ok as I can 
manually select any of them and they work.  However, if I specify a DNS server 
in my config file it automatically detects correctly and gives me the proxy I 
want, the issue is that we use the same DNS servers on each network.


What steps will reproduce the problem?
When the app starts I always get the default proxy regardless of IP.

What version of the product are you using? On what operating system?
1.0.15.0

Please provide any additional information below.
<?xml version="1.0" encoding="utf-8" ?>
<Networks>
  <!-- Uses given proxy PAC file when DNS IP is "172.17.0.1" or when subnet is "172.17.7.254" -->
  <Network name="Site1">
    <Proxy type="Standard" url="http://hopx002:3128" />
    <Rules>
      <Subnet ip="17.17.1.0/21" />
    </Rules>
  </Network>

  <!-- Uses given proxy when computer IP is "172.17.8.1" or "172.17.15.254" -->
  <Network name="Site2">
    <Proxy type="Standard" url="http://akpx001:3128" />
    <Rules>
      <Subnet ip="172.17.8.0/21" />
    </Rules>
  </Network>

  <!-- Uses given proxy when computer IP is "172.17.20.1" or "172.17.21.254" -->
  <Network name="Site3">
    <Proxy type="Standard" url="http://ptpx001:3128" />
    <Rules>
      <Subnet ip="172.17.20.0/23" />
    </Rules>
  </Network>

    <!-- Uses given proxy when computer IP is "172.17.80.1" or "172.17.80.254" -->
  <Network name="Site4">
    <Proxy type="Standard" url="http://pepx001:3128" />
    <Rules>
      <Subnet ip="172.17.80.0/24" />
    </Rules>
  </Network>

      <!-- Uses given proxy when computer IP is "172.17.82.1" or "172.17.82.254" -->
  <Network name="Site5">
    <Proxy type="Standard" url="http://mepx001:3128" />
    <Rules>
      <Subnet ip="172.17.82.0/24" />
    </Rules>
  </Network>

      <!-- Uses given proxy when computer IP is "172.28.9.1" or "172.28.9.254" -->
  <Network name="Site6">
    <Proxy type="Standard" url="http://pecatpx001:3128" />
    <Rules>
      <Subnet ip="172.28.9.0/24" />
    </Rules>
  </Network>

   <!-- By default use Symantec Cloud Proxy -->
  <Network name="Symantec Cloud Filtering">
    <Proxy type="Standard" url="http://127.0.0.1:80" />
  </Network> 

</Networks>

Original issue reported on code.google.com by [email protected] on 10 Nov 2013 at 9:46

Download impossible

Hi,

I just want to download the latest beta version of AutoProxySwitcher but the 
limit of Google Drive downloads has been reached.

Can you do something for it ?

BR

Original issue reported on code.google.com by [email protected] on 24 Sep 2014 at 11:43