mbehr1/adlt

Library and tools to handle automotive DLT (diagnostic log- and trace-) files in Rust.

adlt's Issues

Add adlt cmd line parameter for ecu/apid/ctid filters.

Currently only via -f a filter file can be used e.g. for adlt convert ... command.
The use case of filtering for ecu/apid/ctid is so common/frequently used that a better/easier cmd line option is needed.

• Apply filter for ecu id
• Apply filter for ecu/apid combination
• Apply filter for ecu/apid/ctid combination

Being able to use multiple of those should be possible as well.

add support for V2 of dlt protocol specification

The V2 spec from https://www.autosar.org/fileadmin/user_upload/standards/foundation/21-11/AUTOSAR_PRS_LogAndTraceProtocol.pdf should be supported.

• Minimal support at least to read/and display it.
• Extended support could be to add e.g. the fine granular timestamp format.

(Would be good if there are any examples / test files with V2 around.)

non verbose fibex containing apid but not ctid for a message are ignored

There seem to be non-verbose fibex files where ctids are not provides for a message but apids are.
This is a bit weird as the dlt extended header has either no apid/ctid or both of them.

These cases should be mapped to e.g. a default ctid ('' or 'none' or '' or to the apid as ctid) so that at least the apid info doesn't get lost.