mehmetcanbudak/teensy-control-voltage

8 in / 8 out; +-10V @ 16bits/sample; analog control voltage shield for teensy 4.1

teensy control voltage analog computer shield

open source hardware and software for a teensy 4.1 eurorack control voltage shield

extend a teensy 4.1 with peripherals to interface with eurorack modular equipment.

specifications

• microcontrollers:
  • 600 Mhz ARM cortex m7 ( teensy 4.1 board )
• display: ST7735 128x128 16bit-color tft display
• breakouts:
  • microSD card socket,
  • USB host/device,
  • midi in/out,
  • knobs (4 x pots, 3 x encoders w/switch)
• panel: 14HP aluminium panel mounted for eurorack case
• programability:
  • write arduino compatible c/c++ firmware & program using arduino/teensyduino
  • arm gnu toolchain downloads
  • teensy audio library

MIT open source license

• MIT license unless otherwise specified on a per file basis.

Open source software stack

• All schematics and boards are created using Kicad
• All mechanical designs are created using FreeCAD
• Some images have been rendered using Blender 2.81