mehmetcanbudak/time-warp-o-matic

Time-Warp-O-Matic is a PT2399 based delay/echo/chorus multi effect built using 2 prefabricated PT2399 boards, a CD4066 analog switch, a rotary encoder, 2 potmeters and 2 opamps.

Time-Warp-O-Matic

Time-Warp-O-Matic is a PT2399 based delay/echo/chorus multi effect built using 2 prefabricated PT2399 boards, a CD4066 analog switch, a rotary encoder, 2 potmeters and 2 opamps. The analog switch allows for choosing in which way the signals are routed to and from the PT2399s and the output. Furthermore a feedback / tail and a Wet/Dry control are included. An arduino nano, a rotary control and an OLED display allow for setting effect parameters. The PT2399 configuration / signal routing can be chosen using the rotary encoder. Finally a foot pedal input was added and a CV-input.

If you are interested to read some more about this project, have a look at this thread:

https://lookmumnocomputer.discourse.group/t/sculpt-o-sound-presents-time-warp-o-matic/2807

If you want to see time being warped, have a look at this:

https://www.youtube.com/watch?v=0I7mG5jqZBk