microchip-mplab-harmony/dev_packs

Harmony 3 Product Database

MPLAB® Harmony 3 Device Family Packs

MPLAB® Harmony 3 is an extension of the MPLAB® ecosystem for creating embedded firmware solutions for Microchip 32-bit SAM and PIC® microcontroller and microprocessor devices. Refer to the following links for more information.

• Microchip 32-bit MCUs
• Microchip 32-bit MPUs
• Microchip MPLAB X IDE
• Microchip MPLAB® Harmony
• Microchip MPLAB® Harmony Pages

This repository contains the MPLAB® Harmony 3 Device Family Packs (DFP). Device Family Packs is structured directory of files that provide information related to each device family.

• Release Notes

Contents Summary

Folder	Description
arm	ARM CMSIS pack
Microchip	Microchip device family packs

---

---

dev_packs's Issues

Question: New version of the MCAL compatible with v3.3.0

Hi,
Is there a new version of the MCAL for samv71b associated with the versions after v3.2.1 as they do not have instance folder and previous MCAL use it?
Thanks

The EVSYS Channels Size is incorrect for SAMC20_DFP.

The atdf folder has EVSYS channel value to 6, where as the datasheet states it should be 12 and anything associated with channels. Looks like all 14 atdf xml are infected under "/samc20/atdf/" folder. It was strange that SAMC21_DFP was different than SAMC20_DFP for EVSYS.

The include/component folder "evsys.h" file is initially found bug.
__IO uint32_t EVSYS_CHANNEL[6]; /**< Offset: 0x20 (R/W 32) Channel n */
__I uint8_t Reserved2[0x48];

Wrongly defined pin in chip 32MZ2064DAS176

I noticed that Pin 81 (RD13) from this chip is not correctly defined.

This is how the pin is being described as in the datasheet,
this is how the pin is being shown in MHC.

Found this in the chip's edc file.

Unable to locate ATDF file for processor ID "PIC32MZ2048ECG064"

Does Microchip Harmony V3 has support for PIC32MZ2048ECG064 ?

Missing SDMMC0 in ATSAMA5D225CD1M atdf file

Every document for ATSAMA5D225-CD1G states that this SiP has 2 SDMMC interfaces, but only SDMMC1 is available in Harmony3 Configurator.
I can see that only the SDMMC0 memory segment is present, but the SDMMC0 instance, interrupts lines 31 and 71 are not present.

Missing ATDF file for PIC32MX460F512L

Hi, sorry to ask this in potentially the wrong place but worst case I hope you can direct me to better ears.

I'm new to MPLAB and Harmony and am trying to build for a PIC32MX460F512L chip but Harmony, or more specificaally MCC, doesn't seem to have the required ADTF file. I tried downloading the latest DFP from http://packs.download.microchip.com/ but it still does not contain ADTF entries for the MX460, it does however include the apppropriate 460 .h file. Is there an alternative board I can use that will be compatible with the MX460? Or where can I ask for the ADTF file to be made? Would it be possible to make it myself?

Thanks for your time,
Rob