microchip-pic-avr-examples/avr128db48-opamp-gain-and-offset-calibration-studio-start

This Atmel START based example shows how to calibrate the gain and offset of the OPAMP when configured as a PGA. The internal DAC and ADC are used to perform the calibration procedure. No external components are required.

Gain and Offset Calibration of the Analog Signal Conditioning (OPAMP) Peripheral

A new feature introduced in the AVR® DB MCU is the Analog Signal Conditioning (OPAMP) peripheral. The OPAMP peripheral can be configured as a PGA and in this example, the internal DAC and ADC are used to calibrate the gain and offset for the PGA. For more information on the calibration procedure, see the application note.

Related Documentation

• AN3633 - Gain and Offset Calibration of the Analog Signal Conditioning (OPAMP) Peripheral
• AVR128DB48 Curiosity Nano User Guide
• AVR128DB48 Device Page

Software Used

• Microchip Studio 7.0.2542 or later
• Microchip Studio AVR-Dx_DFP version 1.6.76 or later
• For the MCC based MPLAB X version of this project, please go to this repository

Hardware Used

• AVR128DB48 Curiosity Nano

Setup

• No external hardware setup needed

Demo Configuration

• Connect the AVR128DB48 Curiosity Nano to a computer using a USB cable
• Download the zip file or clone the example to get the source code
• Open the .atsln file with Microchip Studio
• Press Start Without Debugging (CTRL+ALT+F5) to run the application

Conclusion

After going through this example you should be able to calibrate the gain and offset of the OPAMP configured as a PGA.