microchip-pic-avr-examples/avr128db48-using-opamp-as-a-regulated-power-supply

This Atmel Studio 7 bare metal example in Using the Internal OPAMP as Regulated Power Supply for MVIO (AN3636) shows how to use the OPAMP as a regulated power supply for a second voltage domain. This removes the need for a second external power supply. The regulated power supply features is showcased by acting as the second power supply for the Multi-Voltage I/O (MVIO)

AVR128DB48 Using the Internal Opamp as Regulated Power Supply for MVIO

A new feature introduced in the AVR® DB family is the Analog Signal Conditioning (OPAMP) peripheral. In this example, the OPAMP is used as an adjustable power supply. This eliminates the need for an external power supply for a second voltage domain. One op amp is configured as a voltage follower and code examples for four scenarios are presented:

1. Voltage reference using the internal resistor ladder.
2. Voltage reference using an external resistor.
3. Voltage reference using the internal DAC.
4. Monitoring voltage level with the internal ADC.

Related Documentation

• AN3636 - AVR128DB48 Using the Internal OPAMP as Regulated Power Supply for MVIO
• AVR128DB48 device page
• AVR128DB48 Curiosity Nano User Guide

Software Used

• Atmel Studio 7.0.2397 or later
• Atmel Studio AVR-DB_DFP version 1.3.67 or later
• For the MPLAB® X version of these projects, please go to this repository

Hardware Used

• AVR128DB48 Curiosity Nano
• Two resistors (values based on desired voltage level)

Setup

• Enable MVIO powered by internal op-amps on the development board, see application note for each respective scenario
• Enable Dual Supply mode in the System Configuration 1 (SYSCFG1) fuse

Operation

• Connect the AVR128DB48 Curiosity Nano to a computer using a USB cable
• Download the zip file or clone the example to get the source code
• Open the .atsln with Atmel Studio
• Press Start without debugging or use CTRL+ALT+F5 hotkeys to run the application

Conclusion

After going through this example you should have a better understanding of how to set up the OPAMP peripheral as a regulated power supply.