Python library to control an ILI9341 TFT LCD display. Allows simple drawing on the display without installing a kernel module.
Designed specifically to work with the Adafruit 2.8" LCD's ----> https://www.adafruit.com/products/1770
For all platforms (Raspberry Pi and Beaglebone Black) make sure you have the following dependencies:
sudo apt-get update
sudo apt-get install build-essential python-dev python-smbus python-pip python-imaging python-numpy
For a Raspberry Pi make sure you have the RPi.GPIO library by executing:
sudo pip install RPi.GPIO
For a BeagleBone Black make sure you have the Adafruit_BBIO library by executing:
sudo pip install Adafruit_BBIO
Install the library by downloading with the download link on the right, unzipping the archive, navigating inside the library's directory and executing:
sudo python setup.py install
See example of usage in the examples folder.
Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!
Written by Tony DiCola for Adafruit Industries.
MIT license, all text above must be included in any redistribution