morhetz / gruvbox Goto Github PK
View Code? Open in Web Editor NEWRetro groove color scheme for Vim
Retro groove color scheme for Vim
Hi. I'm not entirely sure if this is a gruvbox issue.
I'd like to change the background-color of the statusbar in splitted windows. With the setup i'm using right now (dimInactive) the inactive statusbar has the same color as the background in inactive windows - thus giving no clear visual seperation (by colors) between horizontally split windows.
Is this something which can be handled by gruvbox or is it a vim-specific configuration?
I think the vertsplit is somehow rough. Will you make it better ? :)
$
at end of line in example) to be the same color for all linesReproducable with this .vimrc and vim-plug:
call plug#begin('~/.vim/plugged')
Plug 'morhetz/gruvbox'
call plug#end()
set background=dark
colorscheme gruvbox
set cursorline
set listchars=eol:$
set list
Image:
This may be related to issue #40 ?
Although this might actually be intended behavior :)
Just think it applies better than here. Since this is the Vim-specific theme repo. :)
While we're at it, maybe rename the repo to vim-gruvbox
or something. ;)
It would be cool if you could add specific support for the MiniBufExpl plugin for Vim. :)
You might also want to start using this plugin instead of Vim's tabline. Which is apparently wrong to use it as such, a tab line: http://stackoverflow.com/a/103590/1622940
In any case you should try it out. It's better. ;)
P.S.: Assuming you're using the tabline from the images which seem to have a tabline there. :)
https://github.com/t9md/vim-choosewin
@morhetz Would be cool to have support for this plugin, because it's defaults are a bit ugly:
Pay no mind to my WM, will Gruvbox it soon enough. :)
Hi. I use Vundle.
So, I add string:
Plugin 'morhetz/gruvbox'
change string
colorscheme badwolf
to:
colorscheme gruvbox
And run vundle installation vim +PluginInstall +qall
But I gets error:
Not an editor command: colorcheme gruvbox
Also I try to delete colorscheme. But have no luck.
Also I try to add and remove
set background=dark " Setting dark mode
But it don't get any effect.
Whats I'm doing wrong?
I find it hard to distinguish between the statusline of inactive windows and closed folds: they have the same background color and only the text of folds is a bit darker.
As a workaround I am using "fillchars=stlnc:#".
In general, I think that the statusline bg (also for the current window) should be more distinct from closed folds.
Hi,
The gruvbox_256palette.sh has no effect for Konsole. I have not found the reason yet.
Maybe it is related to this bug:
https://bugs.kde.org/show_bug.cgi?id=231405
I played with the script a little bit, but did not get any good results.
Do you have any ideas?
I wanted to report, that Powerline colors are a bit off, especially with bg=dark, where the window status bar is hardly visisble for inactive windows.
Then I have seen it on the todo list already.
Have you looked into this already?
For reference, the colors and transitions ("nc" => "not current") are in ./powerline/config_files/colorschemes/vim/default.json.
Thanks!
So I've been successfully using gruvbox on my iMac and wanted to also set it up in my vagrant machine running Ubuntu 14.04 LTS.
I wrote a provisioning file to install vim, vundle and gruvbox. Everything gets installed but if I compare the same file with my host OS X machine and the virtual machine with Ubuntu it looks different:
Basically some highlights are missing. I'm also running ~/.vim/bundle/gruvbox/gruvbox_256palette.sh
in my .bashrc
.
Any clue?
Not sure if gruvbox is guilty or vim-signature is :-/
Anyway given my vimrc:
...
Bundle 'kshenoy/vim-signature'
Bundle 'morhetz/gruvbox'
...
if !has("gui_running")
let g:gruvbox_italic=0
endif
set t_Co=256 | set background=dark | colorscheme gruvbox
Whenever I create a new mark, like hitting ma
in normal mode I get:
Error detected while processing function signature#Input..signature#mark#Toggle..signature#mark#Place..signature#sign#Place..signature#sign#RefreshLine:
line 20:
E121: Undefined variable: SignatureMarkText
Commenting lines 664 and 665 in ~/.vim/bundle/gruvbox/colors/gruvbox.vim seem to fix the problem for me.
Hi,
I'm using your theme and it works great except for certain parts in my markdown files. Now, I don't know if this is an issue with gruvbox or with the way my markdown files are being syntax highlighted by the other plugin. See the screenshot
Some parts, like fenced code blocks and inline html and yaml frontmatter has a very low contrast and is hard to distinguish from the background. Is this an issue with gruvbox or should I contact the plugin maintainer?
Hello, and thanks for the great color scheme!
I haven't tried light mode yet, but in dark mode, comments are highlighted as if in light mode. And generally, the colors aren't as vibrant as the screenshot in the README. And some of the syntax highlighting is off. For instance, method names are not highlighted.
It looks nice.
I'm using the Indent Guides plugin, but the Gruvbox disables the color setting for it. It may be good to have an option to disable this behaviour, because if the indent char is space, then the visual mode's color is the same as the indenting color and it can be frustrating when i like to select the indent itself for example.
As mentioned in the wiki, I added the line source "$HOME/.vim/bundle/gruvbox/gruvbox_256palette.sh"
to my ~/.zshrc
and later noticed that this prevented me from logging in to this user (the .zshrc file gets sourced at login).
I'm not sure what is causing this problem -- the file exists and has the needed permissions. However I made a modification to the line so it wouldn't get sourced at login, and I'm able to log in again.
[[ -o login ]] || source "$HOME/.vim/bundle/gruvbox/gruvbox_256palette.sh"
I have a little issue when searching. Gruvbox inverts the cursor color so that when the search is highlighted it's inverted once again. It's hard to spot the currently highlighted result if there are many present on the screen. I wonder what would be the best solution in this case. I really like inverted cursor, are there probably way to make it solid color when searching only?
Thanks.
For some reason when using IndentGuides with gruvbox indent guides are not visible. Manually setting colors in .vimrc
works though.
Current selection color is the inversion of normal colors, this is the only thing I don't like in this colorscheme... and I like it so much. If one uses some rainbow braces plugin for coloring braces, this inverted scheme gets cluttered with so many colors. Also, talking about colors, I miss a differentiated color for the Sign Column background (normally used by syntastic et. al. for highlighting errors).
Hello!
Recently you have disabled italics in terminals by default. How can I enable it again?
I use urxvt and I tried to add "let g:gruvbox_italic=1" in my .vimrc, but it did not help.
I'm wondering if you'd consider setting the color of block quotes in markdown to something other than the current grey? Right now this is the same color as footnote text (though not the identifier, which is a pleasant red). It would be nice to have these differentiated, and to have the block quotes in a brighter color, perhaps blue?
I use vim, and your excellent color scheme, primarily for writing, and this change would help me.
how install it on mac osx
(also handsome color scheme good job)
Colors aren't working for me, can you tell me where the issue could be? I read #4, but it doesn't seem to solve the problem.
Tmux is running with screen-256color
, I also tried with screen-256color-bce
with no avail.
PS.- I actually see the italics, dunno why they can't be seen trough the screencast
Currently the syntax highlighting for spelling works as below:
let g:gruvbox_improved_warnings=0
It feels wrong since a bad spelling is more important than a not capitalised word, in other colorschemes, a bad spelling is usually marked as red and a not capitalised word is usually blue. And btw why does the behaviour of terminal and GUI differ? is there a bug?
I read the documents and found there is an option called g:gruvbox_improved_warnings
I set it but the results went worse:
Terminal:
It made the not capitalised word more visible than a mis spelled word.
Could you change the colors of the spelling syntax?
Also SyntasticError
is using red undercurl which in my opinion is great, so how about we change the color of mis spelled words and not capitalised words to the same as jellybeans?
Thank you for Gruvbox: it's my favorite vim theme.
I created Pentadactyl Gruvbox Theme based on your vim theme. If you like it, place url to my repository, please:
https://github.com/rominf/pentadactyl-gruvbox
PS: Work isn't finished, some colors look crazy, I will fix it little bit later.
I have read the wiki and loaded gruvbox_256palette.sh
file in my .zshrc
and added g:gruvbox_italic=0
to .vimrc
and still as you see in the screenshot, comments are still highlighted. Any idea why?
Hi,
I can't get back to light scheme on terminal when I run below commands:
colorscheme gruvbox
set bg=dark
set bg=light
Last command that should switch gruvbox to light version is ignored.
This post probably contains solution to this problem.
Cheers.
The background color is significantly darker in the GUI version compared to the terminal version. I hope it's just a quick patch. :)
Also remember to update the TODO list in the README file. ;)
EDIT:
Also I just noticed the line colors are different for both versions as well. Might want to look into that. ;)
I'm back on Arch again. ๐
So I'm using urxvt again and I would love to have the terminal theme be Gruvbox.
Have you developed one? You also suggested using a version of urxvt in which you can configure all 256 colors right? What would be the specific config for that?
And out of curiosity, what WM/DE do you use? I use Alopex and I'm loving it. :)
Thank you for beautiful color scheme. Do you have any plans to make color theme for terminal? Like solorise have? Thank you in advance.
I am using gnome-terminal on Ubuntu and noticed, that the effect of gruvbox_256palette.sh gets reset on Alt-Tab or when clicking the terminal window title.
Before (with gruvbox_256palette.sh applied):
I get re-execute gruvbox_256palette.sh (after exiting Vim) to fix it, but since this effect is triggered on Alt-Tab already, it's hard to work around.
This affects both the dark and light schemes.
I think a fix for this might be to have a real palette for gnome-terminal?
Something like the following might do for installation: https://github.com/sigurdga/gnome-terminal-colors-solarized
For what it's worth: Konsole does not re-act on gruvbox_256palette.sh altogether, and xterm is unaffected by this reset-bug.
I just updated all my vim plugins, and found a weird issue with gruvbox + git-gutter. I know it's not git-gutter fault because other colorschemes doesn't exhibit that problem:
I would have expected the background of the sign to be the same of the background of the writing area, not the same as the cursorline.
PS.- it also happens with gvim, so it's not a terminal issue :)
Some words are not bold. For example:
Based on the screenshots at https://github.com/morhetz/gruvbox/wiki/Gallery
All those are supposed to be bold.
Could it be the font I am using? I already have:
let gruvbox_bold = 1
in ~/.vimrc. In ~/.Xresource, I have:
URxvt.font: xft:DejaVu Sans Mono:size=11:antialias=true
However, the method names (initialize, active_plans, etc) are bold. But nothing else. Any ideas?
Have a look at screenshot below.
I have some months ago started using a Gruvbox Airline theme of my own making that I'm not sure if you would like to refine somehow before merging to Airline.
Added it on this commit: https://github.com/Greduan/dotfiles/commit/d06899e7245f2eb9f472d5d44cb66af15bc8369d IIRC
The file is this one: https://github.com/Greduan/dotfiles/blob/master/vim/autoload/airline/themes/gruvbox.vim
Any modifications you'd like made to it? I personally like it bt I'm quite uncreative when it comes to this stuff, I like using as few colors as possible, which you may not want. :)
Is it possible to change the background color to #1a1a1a instead?
So I've recently been slowly moving to Emacs. And while the Zenburn theme isn't terrible, it isn't good either (IMO).
So far this theme has been by far my favorite so I'd like to port it to the Emacs version.
Already have a repo ready for it: https://github.com/Greduan/emacs-theme-gruvbox
So really all I need is info that'll save me time. Like, color for integers, strings, variable names and all that stuff. Clear instructions on that please! So that I don't mess it up in the port by accident. :)
And of course, the color values themselves. :)
Thanks again, and keep up the good work. :)
Hey :)
Thanks for this beautiful theme!! It would be great if I could use it in the Terminal as well ;)
best,
Dionysis
Excellent color scheme !! It would be nice if you can make one compatible with Sublime Text or Textmate.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.