mrplusgh/nplusminer

NPlusMiner + GUI | NVIDIA/AMD/CPU miner | AI | Autoupdate | MultiRig remote management

nplusminer's Issues

Add x16r support

Miner Enemy-Miner

Ei man! Great work with Nplus Miner.
Maybe you could use EnemyMiner for X16r and X17?

https://gyazo.com/9fa19f8be0bb9d010df14b66c4c05997

Thanks for your work!!!

BlazePool and MPH not reporting profit

BlazePool and MPH not reporting profit. It is showing up on their API/Wallet websites.
I think there maybe an issue with NiceHash reporting profit also, but didn't mine long.

RavenMiner 1080TI issues

Hi!
I see that my rigs with 1080TIs are crashing a lot when mining X16R.
GPU usage is very unstable and with a lot of spykes.
I must underclock all GPUs to avoid crashes.
https://gyazo.com/9038dd8f3a7f39f133493c64a7fe6ac2
What could we do?
Note: My 980TIs rig is working OK. Issues only with 1080TI.

Inconsistent Benchmarking Results

Good day. I have an issue, not sure if it's related to the miner or the pool. Attached is a photo of two 5 GPU instances running on my 10 GPU (1080Ti) machine (same model GPUs) with no OC. Prior to benching the stats folder was wiped clean, and both instances were executed simultaneously.

Why aren't the benchmark results the same or at least very similar? x17 has approximately a 30% difference between the two instances.

Can't download miners

GitHub switched to TSL v1.2 Only on Feb 22 which breaks miners downloads
https://githubengineering.com/crypto-removal-notice/

c11 zergpool.com problem

Hi MrPlus, i have an issue with c11 algo on zergpool.com sometimes. Is that possible that pool not accepting this algo during technical work or another reason.
Please see below:

and few min after.....

Change location pref logic and Add Zergpool EU servers support

Change $Location logic then add Zergpool EU servers support

Tribus and X11Gost Failure

Running 1080tis, I had both Tribus and X11Gost fail. I was able to fix by using different scripts.
Not an OC issue. Only have mem +610 No core OC

Tribus - CcminerTpruvotcuda9.ps1 >> CcminerTpruvotx64.ps1
X11Gost - ccminerAlexis78.ps1 >> ccminerAlexis78x11gost.ps1

Released 2.0.3

Released 2.0.3

• GPU count detection
  • NPlusMiner will detect GPU count at start if not set in config
• Disable GPU0 option
  • Ability to use all GPU but 0 per our users request
• "-Config" at launch
  • Allows to run with different prepared configurations
  • To use different config files. NPlusMiner can be launched with -config
  • See example in "NPlusMiner With ConfigFile.bat"
• BTC Price information added
• Added NPlusMiner-ConsoleUp for console lovers
  • Use this to launch the Application with the Console UI
• Fixed error raised after miners download
• Renamed "\prerun\default.bat" to "default-Example.bat" to avoid launching an empty bat if prerun is not used

Earning tracker shows negative after payment on some pools

Some pools API do reset "total" after payment (ZPool)
Results in negative after payment.

Performance mode idea

This is just a feature idea.

Have two modes to choose from. A safe mode that works with older cards and low chance of crash and a high performance mode that has fast miners, and works best with the newer cards. That way everyone is happy.

A possible third mode could be to optimize for 7-12 gpus.

Possible way of implementing is by having a folder for each mode and point to folder of selected mode.

Could also be called miner mode?

Possible folders:
Miners
--Safe
--High
--712
----Set1
----Set2

Bin
--Set1
--Set2

In the 712 folder there would be two sub folders for scripts.. one for one port and the other for another.
In the Bin folder there would be two sub-folders as Set1 runs one instance and Set2 runs the other.

Help and howtos

Benchmarking

Nplus miner just starts mining without benching first.

also when will you add Europe stratum support for zergpool?

thx bro

Copyright symbol

Deleted.. No conflict

Exception when pool stats fails on first attempt

Change handling of 0 pools to timer based + return

Rework Worker name - Deal with "ID=" in code

X16s algo on zergpool?

Any plans to add newly added X16s algo to NplusMiner?There is an announcement on bitcointalk forum.

Thanks!

excavator

Any chance of doing some excavator miner files for Nplus? SniffDog gets around the EULA by #'ing out all alogs and making peeps manually modd the file for it to work. MPM makes you DL manually. Either would be awesome as Neoscrypt is faster with excavator!

Currency, EUR - USD

Hi there, selecting EUR currency instead of USD but console still shows USD

Released 1.3.2

Change NeoScrypt Miner to HSRMiner (thanks jrafaelmdo)

Explanation Request: brain plus config parameters

Hey, wasn't sure where to post this so hopefully here is ok. I was seeing a lot of switching using zergpool plus and decided to try and decrease it. I doubled the sample size and trendspan size in the brain plus config xml, let it run overnight and saw increased profits today. I know there are many other factors involved, but would you mind explaining a bit how these parameters are meant to change the switching end result, I'd like to play around with them a bit more, but don't really understand what they do. LIke pros, cons of increasing/decreasing each? Also, what does sample half power do?

your work is much appreciated

Shortcut

Is there a reason why the shortcut won't work outside of the folder? Have tried copying, making a shortcut of the shortcut and neither work. would be nice to get this function to set it to auto launch through the startup shell.
Thank you.

Add -Config support

Add -Config so NPlusMiner can be started on different config files

Modify Version check to 24hr

Earnings Tracking Error

Hi,

Please look at the screenshot. I am getting a similar error on 2 different rigs. Not sure how to resolve it or what it stems from.

Great project by the way!

Radio buttons for plus pools

Another idea to make GUI more user friendly is to have radio buttons for the plus pools:

(c) Ahashpool (r) Std (r) 24h (r) Plus

Could use Nml for normal instead of Std for standard.

HiveOS compatibility?

Hi @MrPlusGH , is there any think to make it works with HiveOS?

2 miner thread started instead of 6

Hi there,

When I download a new version, after configuring and starting, it will only start a 2 miner tread (while 6 gpu's are selected). I need to close the GUI and reopen. Then when I press start it will start 6 miner threads. This only happens during the initial setup.

Running multiple instances - Port detection timing

Hi!
Sorry for my bad english...
I think you have choose wrong way to allocate free TCP port for miner APIs... For example - i have 2 instances of nplusminer on my rig. Both of them want to switch miner in 1 time. But first instance wants to switch to X17 algo, second to Lyra2v2. Both miners calls "Get-FreeTcpPort" and recieves 4068 port. As a result - we can have corrupted Stats in one instance and failed miner on second instance.
I think - you should add 1 config param - "instance number" and allocate different port ranges... For example: 4068 + 20*instance number.
Thanks for your work!

Define a minimum number of workers in a pool

Hi,

Could a minimum number of worker filter to exclude pools be implemented? Thanks

No miners - files missing?

Also im getting this in 2.1.1

GPU #0: Cuda error in func 'neoscrypt_cpu_init_2stream' at line 1445 : out of memory.
[2018-03-17 08:01:25] stopping 1 threads

reinstalled (new unzipped 2.1.1 clicked start mining and i get this error and it stops there. (yes optimize for compute performance is off). I do not get this error in 2.1 What am I doing wrong? Yes i have tried google but there is just so much out there that i cant find a clear answer as to what to do. thank you again

EDIT: going back to 2.1 I now get a spam of red text in console and it dies too. I think problem started after I overclocked my gpu a bit to high but still the same issue even after i set all oc setting back to factory. Im having NO issues on games or any regular use with my card.
console spam that it shows'.txt

DSTM miner / Equihash / Stratum is empty

Hi guys,
is anybodies has the problem with with Equihash?
Stratum is blank.

Released 1.3.1 [Bug fix]

Fixes Miners download problem

GitHub switched to TSL v1.2 Only on Feb 22 which breaks miners downloads
https://githubengineering.com/crypto-removal-notice/

Added Window title info

Product
Version
Runtime (Time since start)
Path (Script location. Useful if several copies on same rig)

Please substitute PalginHSR for HSRMINER Neoscrypt Fork, attached miner file

Hello.

I created the miner file for HSRMINER Neoscrypt Fork, it has ccminer api support (so no more issues with wrapper and never ending benchmark)

https://bitcointalk.org/index.php?topic=2765610.0

In my systems its a bit faster than klaust and excavator. Fell free to added.

Thanks.

HSRminer.zip

For all GPU’s, the launch timed out

Package 2.1

This release includes structural changes in code and files. Do not copy files over for previous versions.

Working on packaging now

• Miners updates
  • Added RavenMiner for x16r (More stable)
  • Updated Claymore to 11.4
• Performance improvements
  • Reduced BrainPlus processes priority
  • Reduced EarningTracker processes priority
• No restart on configuration changes
  • New configuration is now applied after save. No need to restart.
  • Same when modifying PoolsConfig.json
  • Note for Earnigs Tracking. If you add a supported pool or change address, no tracker will be started for this one until the next restart
• Fixed prerun stealing focus
  • prerun will now be launched silently (Thanks Enkrypt and dwellhurtyswan)
• Per pool configuration option (Advanced)
  • This is for advanced users. Do not use if you do not know what you are doing.
  • You can now set specific options per pool. For example, you can mine NiceHash on the internal wallet and other pools on a valid wallet. This configuration is provided as an example in Config\PoolsConfigNHInternal.json
    • Available options
      • Wallet = your wallet address
      • UserName = your MPH user name
      • WorkerName = your worker name
      • PricePenaltyFactor = See explanation below
    • Usage
      • The file Config\PoolsConfig.json contains per pool configuration details. If a pool is listed in this file, the specific settings will be taken into account. If not, the setting for the entry name default will be used. Do not delete the default entry.
      • Edit Config\PoolsConfig.json
      • Add an entry for the pool you want to customize
        • The name must be the NPlusMiner name for the pool. ie. for ahashpool, if you use Plus. The name is ahashpoolplus.
        • (careful with json formating ;))
        • Best way is to duplicate the default entry
  • Note that the GUI only updates the default entry. Any other changes need to be done manualy
• PricePenaltyFactor
  • When using advanced per pool configuration, it is possible to add a penalty factor for a specific pool. This simply adds as a multiplicator on estimations presented by the pool.
  • Example scenario
    • NiceHash as a 4% fee - Set PricePenaltyFactor to 0.96 (1-0.04)
    • You feel like a pool is exaggerating his estimations by 10% - Set PricePenaltyFactor to 0.9
• Fixed BTC price not shown in the selected currency (Thanks Nyghto)
• Fixed no address in switching.log when mining MPH

GPU count detection at first run

Zergpool added new port to X16r algo, please update

Hi,

x16r ports that used are 3636 and 3637 and if any is full (2000) users there will be a reject, please update theps1 to include 3637 as well.

Help again 'neoscryp'

ccminer 8.21-KlausT (64bit) for nVidia GPUs
Compiled with Visual Studio 2015 using Nvidia CUDA Toolkit 9.1

Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
CUDA support by Christian Buchner, Christian H. and DJM34
Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.

[2018-03-18 15:04:12] Intensity set to 17, 131072 cuda threads
[2018-03-18 15:04:12] Starting Stratum on stratum+tcp://neoscrypt.mine.zpool.ca:4233
[2018-03-18 15:04:12] NVML GPU monitoring enabled.
[2018-03-18 15:04:12] NVAPI GPU monitoring enabled.
[2018-03-18 15:04:12] 1 miner thread started, using 'neoscrypt' algorithm.
[2018-03-18 15:04:14] Stratum difficulty set to 512
[2018-03-18 15:04:14] Received new neoscrypt block header
[2018-03-18 15:04:14] block height 58607, 0 transactions
GPU #0: Cuda error in func 'neoscrypt_cpu_init_2stream' at line 1445 : out of memory.
[2018-03-18 15:04:15] stopping 1 threads

then it dies. only happens on this neoscrypt

How can I fix this?

v2.0 or 2.01?

Hello, apologies if i'm mistaken. When I download 2.01 from here and set it up, there is an indicator on the GUI that version 2.01 is available for download.

Also, can we display the current BTC & LTC prices on the GUI? just an idea.

PalginNeoHashrate.txt

not needed anymore

trust level not getting to 100%

I've left it running for 8 hours, however the trust level only got to 37% and it says 00 days 02:13.
The zpool balance is updating but it seems like all the other figures have frozen.

earnings tracker displsyng negative values

have been running 1.3.2 for half a day and this is what the earnings tracker is displaying
zpoolplus Balance= 0.00271191 108%
Trust Level 100% [ 00 days 11:12 ]
Average BTC/H BTC = -0.00013630 | mBTC = -0.136
Average BTC/D BTC = -0.00327123 | mBTC = -3.271
Estimated Pay Date 25/02/2018 10:00:00 > 0.0025 BTC

two other rigs are showing different but negative btc/day values

NplusMiner 2.1.3 include.ps1 argumentexception

Hi,

PC crash rebooted, since then getting various errors when launching NPlusMiner 2.1.3. Been starting for more than 15 mins now, not yet done.
Need developer support to solve those issues, please help. The below errors are printed

---

Windows PowerShell transcript start
Start time: 20180329113658
Username: DESKTOP-67Q2PV4\DBminer
RunAs User: DESKTOP-67Q2PV4\DBminer
Configuration Name:
Machine: DESKTOP-67Q2PV4 (Microsoft Windows NT 10.0.16299.0)
Host Application: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -version 5.0 -executionpolicy bypass -windowstyle maximized -file .\NPlusMiner-v2.1.ps1
Process ID: 6980
PSVersion: 5.1.16299.251
PSEdition: Desktop
PSCompatibleVersions: 1.0, 2.0, 3.0, 4.0, 5.0, 5.1.16299.251
BuildVersion: 10.0.16299.251
CLRVersion: 4.0.30319.42000
WSManStackVersion: 3.0
PSRemotingProtocolVersion: 2.3
SerializationVersion: 1.1.0.1

---

PS>TerminatingError(ConvertFrom-Json): "Invalid JSON primitive: ."
ConvertFrom-Json : Invalid JSON primitive: .
At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:210 char:43

•         $Content = $_ | Get-Content | ConvertFrom-Json
  

•                                       ~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [ConvertFrom-Json], ArgumentException
  • FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.ConvertFromJsonCommand
    ConvertFrom-Json : Invalid JSON primitive: .
    At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:210 char:43

•         $Content = $_ | Get-Content | ConvertFrom-Json
  

•                                       ~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [ConvertFrom-Json], ArgumentException
  • FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.ConvertFromJsonCommand

Finding available TCP Port
PS>TerminatingError(New-Object): "Exception calling ".ctor" with "2" argument(s): "No connection could be made because the target machine actively refused it 127.0.0.1:4068""
Miners API Port: 4068
Starting Brains for Plus...
Starting Earnings Tracker...
Starting Cycle
Loading BTC rate from 'api.coinbase.com'..
PS>TerminatingError(ConvertFrom-Json): "Invalid JSON primitive: ."
ConvertFrom-Json : Invalid JSON primitive: .
At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:210 char:43

•         $Content = $_ | Get-Content | ConvertFrom-Json
  

•                                       ~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [ConvertFrom-Json], ArgumentException
  • FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.ConvertFromJsonCommand
    ConvertFrom-Json : Invalid JSON primitive: .
    At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:210 char:43

•         $Content = $_ | Get-Content | ConvertFrom-Json
  

•                                       ~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [ConvertFrom-Json], ArgumentException
  • FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.ConvertFromJsonCommand

Loading pool stats..
Cannot convert null to type "System.DateTime".
At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:117 char:5

• $Stat = [PSCustomObject]@{
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : InvalidArgument: (:) [], RuntimeException
  • FullyQualifiedErrorId : nullToObjectInvalidCast
    Cannot convert null to type "System.DateTime".
    At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:117 char:5

• $Stat = [PSCustomObject]@{
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : InvalidArgument: (:) [], RuntimeException
  • FullyQualifiedErrorId : nullToObjectInvalidCast

Cannot find an overload for "op_Subtraction" and the argument count: "2".
At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:134 char:5

• $Span_Minute = [Math]::Min(($Date - $Stat.Updated).TotalMinutes,  ...
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest
    Cannot find an overload for "op_Subtraction" and the argument count: "2".
    At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:134 char:5

• $Span_Minute = [Math]::Min(($Date - $Stat.Updated).TotalMinutes,  ...
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest

Cannot find an overload for "op_Subtraction" and the argument count: "2".
At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:135 char:5

• $Span_Minute_5 = [Math]::Min((($Date - $Stat.Updated).TotalMinute ...
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest
    Cannot find an overload for "op_Subtraction" and the argument count: "2".
    At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:135 char:5

• $Span_Minute_5 = [Math]::Min((($Date - $Stat.Updated).TotalMinute ...
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest

Cannot find an overload for "op_Subtraction" and the argument count: "2".
At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:136 char:5

• $Span_Minute_10 = [Math]::Min((($Date - $Stat.Updated).TotalMinut ...
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest
    Cannot find an overload for "op_Subtraction" and the argument count: "2".
    At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:136 char:5

• $Span_Minute_10 = [Math]::Min((($Date - $Stat.Updated).TotalMinut ...
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest

Cannot find an overload for "op_Subtraction" and the argument count: "2".
At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:137 char:5

• $Span_Hour = [Math]::Min(($Date - $Stat.Updated).TotalHours, 1)
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest
    Cannot find an overload for "op_Subtraction" and the argument count: "2".
    At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:137 char:5

• $Span_Hour = [Math]::Min(($Date - $Stat.Updated).TotalHours, 1)
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest

Cannot find an overload for "op_Subtraction" and the argument count: "2".
At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:138 char:5

• $Span_Day = [Math]::Min(($Date - $Stat.Updated).TotalDays, 1)
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest
    Cannot find an overload for "op_Subtraction" and the argument count: "2".
    At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:138 char:5

• $Span_Day = [Math]::Min(($Date - $Stat.Updated).TotalDays, 1)
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest

Cannot find an overload for "op_Subtraction" and the argument count: "2".
At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:139 char:5

• $Span_Week = [Math]::Min((($Date - $Stat.Updated).TotalDays / 7), ...
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest
    Cannot find an overload for "op_Subtraction" and the argument count: "2".
    At C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Include.ps1:139 char:5

• $Span_Week = [Math]::Min((($Date - $Stat.Updated).TotalDays / 7), ...
  

• ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  

  • CategoryInfo : NotSpecified: (:) [], MethodException
  • FullyQualifiedErrorId : MethodCountCouldNotFindBest

Computing pool stats..
Loading miners..
Comparing miners and pools..
Launching Prerun: .\Prerun\X16r.bat
Starting miner
1BTC = 6113 EUR
The process cannot access the file 'C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Config\poolapiref.json' because it is
being used by another process.
+ CategoryInfo : OpenError: (:) [Out-File], IOException
+ FullyQualifiedErrorId : FileOpenFailure,Microsoft.PowerShell.Commands.OutFileCommand
+ PSComputerName : localhost
The process cannot access the file 'C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Config\poolapiref.json' because it is being used by another process.
+ CategoryInfo : OpenError: (:) [Out-File], IOException
+ FullyQualifiedErrorId : FileOpenFailure,Microsoft.PowerShell.Commands.OutFileCommand
+ PSComputerName : localhost

The process cannot access the file 'C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Config\poolapiref.json' because it is
being used by another process.
+ CategoryInfo : OpenError: (:) [Out-File], IOException
+ FullyQualifiedErrorId : FileOpenFailure,Microsoft.PowerShell.Commands.OutFileCommand
+ PSComputerName : localhost
The process cannot access the file 'C:\Users\DBminer\Desktop\NPlusMiner-2.1.3\Config\poolapiref.json' because it is being used by another process.
+ CategoryInfo : OpenError: (:) [Out-File], IOException
+ FullyQualifiedErrorId : FileOpenFailure,Microsoft.PowerShell.Commands.OutFileCommand
+ PSComputerName : localhost

NVidia settings question

I'm very new to all this. Somewhere i read that setting "Optimize for compute performance" to "ON' under the Nvidia control panel would help? When I do then start Nplusminer the console tells me all Cuda cores are in use in red and nothing gets mined. Should I just leave it off since it mines just fine with it off? BTW im using a gtx 970 (soon to be 2 1080ti i hope)

Thanks for any help someone can give me. Sorry if its a stupid question. Any help would be appreciated

GUI worker name with multiple pools

If you are running multiple pools including MPH, then you have a problem with the worker name as MPH doesn't use "ID=". I know there is a work around by using the PoolsConfig.json file, but issue if just using GUI. I think "ID=" should somehow be moved to code.

Code cleanup

Released 2.0

NPlusMiner now has a GUI !

• Added GUI
• Relies on Config files (no .bat editing)
• Track earnings in GUI. (Per address / Pool)

Easy and Advanced GPU setting

Easy = GPUCount
Advanced = Specific devices