mrsvcd/lazarustormfanadapter

These adapters are created to be used with Dennis Busches "Lazarustorm&PiStorm&Pi3B+ 3D printable case"

https://dennisbusch-de.itch.io/lazarustormpistormpi3b-3d-printable-case

These adapters are licensed under GPL v3 (and therefor can be sold as long as the source code is provided when asked, or include when sold).

Copyright by Pär Moberg

https://github.com/MrSVCD/LazarustormFanAdapter/

Instructions

"Inlet Flat.stl" and "Inlet Tall Center.stl" only really works on the fan position where the SD card cutout is because of space constraints. "Tall Side.stl" works in both fan positions.

If either of the Tall versions of the fan adapter is used in SD card fan position it is considerably harder to change the SD card but the result is a more compact package over all.

Printing

All prints should be able to be printed without need for supports in the orientation the prints are in the files.

Building

The Build.sh script requires bash and OpenSCAD.

This script is for my convenience and is not adapted to be run on anything other than my own machines. Look at it before you run it.