mseclab/nathan

Android Emulator for mobile security testing

nathan's Issues

Any plans to update Android?

Hey there,

I just wanted to know if there are any plans to update the Android emulator to Android 6 or 7.

Greetings

emulator is

it shows:
Starting emulator with:
./sdk/tools/emulator -avd nathan_x86 -verbose -show-kernel -no-snapshot-save -gpu on -netspeed full -netdelay none -selinux disabled -qemu -no-reboot
Nathan emulator boot in progress...
Mapped system partition to:/tmp/android-root/emulator-NjoWXD
Nathan closed
emulator is closed for a while.

The arm architecture will soon？

The arm architecture will soon？ I've always been interested in this project!

GPU issues in Kali VM

I am trying to run the emulator on Kali. After running python nathan.py init and then python nathan.py -v start I receive the following output:

...
emulator: android_hw_fingerprint_init: fingerprint qemud listen service initialized
emulator: Skipping metrics reporting: No user opt-in.
emulator: ERROR: Could not initialize OpenglES emulation, use '-gpu off' to disable it.
emulator: Done with QEMU main loop
emulator: User-config was not changed.
Nathan closed. Byebye

Emulator stops at the Nathan logo

With a fresh install of Kali 2019.3 in VMware:

$ git clone https://github.com/mseclab/nathan
$ cd nathan
$ ./nathan.py init
$ cd ~/nathan/sdk/tools/lib64/libstdc++
$ mv libstdc++.so.6 libstdc++.so.6_OLD
$ ln -sf /usr/lib/x86_64-linux-gnu/libstdc++.so.6 libstdc++.so.6
$ ./nathan.py start

 | \ | |     | | | |
 |  \| | __ _| |_| |__   __ _ _ __
 | . ` |/ _` | __| '_ \ / _` | '_ \
 | |\  | (_| | |_| | | | (_| | | | |
 |_| \_|\__,_|\__|_| |_|\__,_|_| |_|

Nathan Emulator - Mobile Security Lab 2016
Version 1.0.0
Author: Roberto Gassira' - [email protected]
Distributed under MIT license.

Selected architecture: x86
Nathan ROM version: NRL001
Checking emulator...
Checking local emulator version...
OK: using local Android emulator version 25.1.7.0
Redirecting output to nathan_x86.log
Starting emulator with:
./sdk/tools/emulator -avd nathan_x86 -verbose -show-kernel -no-snapshot-save -gpu on -netspeed full -netdelay none -selinux disabled -qemu -no-reboot 
Nathan emulator boot in progress...
Mapped system partition to:/tmp/android-root/emulator-DZU20F
Running Kernel: Linux version 3.4.67+ ([email protected]) (gcc version 4.8 (GCC) ) #3 PREEMPT Tue Sep 16 19:46:22 CEST 2014

Plans to update this project?

Hello @mseclab

Do you have any plans to update this repo? I am willing to make contributions and PR to update this project.
I've used it and it's been super helpful to me.

Init Script fails due to custom port

Running the init script it tries do download a configuration:

Downloading lastest configuration...
GET http://repo.mseclab.com:9080/nathan/current...
Impossible to download the file -> <urlopen error [Errno 110] Connection timed out>

The response of the webserver is only one string:

NRL001

In most business environments such ports are blocked, please move to 80/443.
Moreover after the script is restarted the android sdk is downloaded again, the previous download is not reused.

Emulator Missing

I know I'm missing the obvious but how do I rectify this:

Selected architecture: x86
Nathan ROM version: NRL001
Checking emulator...
Checking local emulator version...
KO: Local emulator error = sh: 1: glxinfo: not found
.
Checking system emulator version...
[140617938933568]:ERROR:android/android-emu/android/qt/qt_setup.cpp:28:Qt library not found at ../emulator/lib64/qt/lib
Could not launch '/home/stuart/nathan/../emulator/qemu/linux-x86_64/qemu-system-i386': No such file or directory

Emulator not available! Please retry ./nathan.py init.

This is on Ubuntu 16:04 and I have Android Studio installed and the path variables set.

I have followed the installation instructions a few times with the same result when running ./nathan.py start

Any guidance appreciated.

The emulator stoped the nathan logo, can't enter into system!

The emulator stoped the nathan log, can't enter into system! And I found log:

[    0.748119] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!

platform tools: platform-tools_r24.0.2-macosx.zip
tools: tools_r25.1.7-macosx.zip

Bootloop issue on first start

uname -a

Linux system 4.8.0-kali2-amd64 #1 SMP Debian 4.8.11-1kali1 (2016-12-08) x86_64 GNU/Linux
./nathan.py start
Selected architecture: x86
Nathan ROM version: NRL001
Checking emulator...
Checking local emulator version...
OK: using local Android emulator version 25.1.7.0
Redirecting output to nathan_x86.log
Starting emulator with:
./sdk/tools/emulator -avd nathan_x86 -verbose -show-kernel -no-snapshot-save -gpu on -netspeed full -netdelay none -selinux disabled -qemu -no-reboot
Nathan emulator boot in progress...
Mapped system partition to:/tmp/android-root/emulator-4B4oQG
Running Kernel: Linux version 3.4.67+ ([email protected]) (gcc version 4.8 (GCC) ) #3 PREEMPT Tue Sep 16 19:46:22 CEST 2014

cat nathan_x86.log (last lines)

[ 38.495708] type=1403 audit(1482406262.480:23): policy loaded auid=4294967295 ses=4294967295
[ 38.765442] init: untracked pid 1024 exited with status 1
[ 39.076030] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[ 39.886128] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[ 40.066128] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[ 41.916168] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[ 46.636496] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[ 47.365816] init: untracked pid 1078 exited with status 1
[ 48.066063] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[ 53.506659] init: untracked pid 1095 exited with status 1
[ 67.927597] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 127.326929] type=1400 audit(1482406351.311:24): avc: denied { module_request } for pid=1245 comm="iptables" kmod="ipt_TCPMSS" scontext=u:r:netd:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
[ 127.927562] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 187.978737] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 247.929589] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 307.930131] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 367.920909] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 427.922039] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 488.242523] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 547.923747] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 593.474365] main[941]: segfault at be91771c ip b71b0e60 sp bfdbdf40 error 4 in libcrypto.so[b7168000+16c000]
[ 594.249984] init: untracked pid 1059 killed by signal 9
[ 594.274439] init: untracked pid 1064 killed by signal 9
[ 594.284488] init: untracked pid 1076 killed by signal 9
[ 594.284488] init: untracked pid 1081 killed by signal 9
[ 594.783866] init: Warning! Service zygote needs a SELinux domain defined; please fix!
[ 607.925663] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 608.044966] type=1400 audit(1482406831.919:25): avc: denied { write } for pid=1349 comm="sed_service_app" path="socket:[3532]" dev="sockfs" ino=3532 scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_dgram_socket permissive=1
[ 627.089204] main[1333]: segfault at be95359c ip b7179e60 sp bfb49080 error 4 in libcrypto.so[b7131000+16c000]
[ 627.285129] init: Warning! Service zygote needs a SELinux domain defined; please fix!
[ 627.345130] init: untracked pid 1348 killed by signal 9
[ 627.345130] init: untracked pid 1349 killed by signal 9
[ 627.345130] init: untracked pid 1359 killed by signal 9
[ 627.375241] init: untracked pid 1360 killed by signal 9
[ 627.375241] init: untracked pid 1413 killed by signal 9
[ 668.367011] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 668.516548] main[1414]: segfault at be85351c ip b7137e60 sp bfed9500 error 4 in libcrypto.so[b70ef000+16c000]
[ 670.135573] init: untracked pid 1430 killed by signal 9
[ 670.157767] init: untracked pid 1431 killed by signal 9
[ 670.157767] init: untracked pid 1437 killed by signal 9
[ 670.157767] init: untracked pid 1438 killed by signal 9
[ 670.157767] init: untracked pid 1493 killed by signal 9
[ 670.608341] init: Warning! Service zygote needs a SELinux domain defined; please fix!
[ 701.255567] main[1498]: segfault at be81371c ip b712ae60 sp bfc33600 error 4 in libcrypto.so[b70e2000+16c000]
[ 701.385482] init: untracked pid 1509 killed by signal 9
[ 701.385482] init: untracked pid 1518 killed by signal 9
[ 701.385482] init: untracked pid 1519 killed by signal 9
[ 701.466406] init: Warning! Service zygote needs a SELinux domain defined; please fix!
[ 701.510047] init: untracked pid 1508 killed by signal 9
[ 701.546416] init: untracked pid 1580 killed by signal 9
[ 727.376438] main[1585]: segfault at bbd5671c ip b70d5e60 sp bfde4740 error 4 in libcrypto.so[b708d000+16c000]
[ 727.486540] init: Warning! Service zygote needs a SELinux domain defined; please fix!
[ 727.528634] init: untracked pid 1598 killed by signal 9
[ 727.528634] init: untracked pid 1599 killed by signal 9
[ 727.562277] init: untracked pid 1607 killed by signal 9
[ 727.562277] init: untracked pid 1609 killed by signal 9
[ 727.562277] init: untracked pid 1669 killed by signal 9
[ 727.926024] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[ 753.327290] main[1670]: segfaul

Failed to Start

It seems the emulator failed to start. It is like loading forever.

OS: Mac OS 10.11.6

Error Log:

emulator: Android virtual device file at: /Users/its/Project/tools/android/nathan/nathan_x86.ini
emulator: virtual device content at /Users/its/Project/tools/android/nathan/nathan_x86
emulator: virtual device config file: /Users/its/Project/tools/android/nathan/nathan_x86/config.ini
emulator: using core hw config path: /Users/its/Project/tools/android/nathan/nathan_x86/hardware-qemu.ini
emulator: Found AVD target API level: 23
emulator: No build.prop property file found.
emulator: No boot.prop property file found.
emulator: Cannot find target CPU architecture, defaulting to 'arm'
emulator: Cannot find target CPU ABI, defaulting to 'armeabi'
emulator: 'magic' skin format detected: 1080x1920
emulator: autoconfig: -skin 1080x1920
emulator: autoconfig: -skindir (null)
emulator: found magic skin width=1080 height=1920 bpp=16

emulator: autoconfig: -kernel /Users/its/Project/tools/android/nathan/nathan_x86/kernel-qemu
emulator: Target arch = 'arm'
emulator: Auto-detect: Kernel image requires legacy device naming scheme.
emulator: Auto-detect: Kernel does not support YAFFS2 partitions.
emulator: autoconfig: -ramdisk /Users/its/Project/tools/android/nathan/nathan_x86/ramdisk.img
emulator: Using initial system image: /Users/its/Project/tools/android/nathan/nathan_x86/system.img
emulator: autoconfig: -data /Users/its/Project/tools/android/nathan/nathan_x86/userdata-qemu.img
emulator: autoconfig: -initdata /Users/its/Project/tools/android/nathan/nathan_x86/userdata.img
emulator: autoconfig: -cache /Users/its/Project/tools/android/nathan/nathan_x86/cache.img
emulator: autoconfig: -sdcard /Users/its/Project/tools/android/nathan/nathan_x86/sdcard.img
emulator: WARNING: SELinux 'disabled' is no longer supported starting with API level 23, switching to 'permissive'
emulator: Physical RAM size: 1536MB

emulator: WARNING: VM heap size set below hardware specified minimum of 228MB
emulator: WARNING: Setting VM heap size to 384MB
emulator: GPU emulation enabled using 'host' mode
emulator: CPU Acceleration: DISABLED
emulator: CPU Acceleration status: HAXM is not installed on this machine
Content of hardware configuration file:
  hw.cpu.arch = x86
  hw.cpu.ncore = 1
  hw.ramSize = 1536
  hw.screen = multi-touch
  hw.mainKeys = false
  hw.trackBall = false
  hw.keyboard = true
  hw.keyboard.lid = false
  hw.keyboard.charmap = qwerty2
  hw.dPad = true
  hw.gsmModem = true
  hw.gps = true
  hw.battery = true
  hw.accelerometer = true
  hw.audioInput = true
  hw.audioOutput = true
  hw.sdCard = true
  hw.sdCard.path = /Users/its/Project/tools/android/nathan/nathan_x86/sdcard.img
  disk.cachePartition = true
  disk.cachePartition.path = /Users/its/Project/tools/android/nathan/nathan_x86/cache.img
  disk.cachePartition.size = 66m
  hw.lcd.width = 1080
  hw.lcd.height = 1920
  hw.lcd.depth = 16
  hw.lcd.density = 420
  hw.lcd.backlight = true
  hw.gpu.enabled = true
  hw.gpu.mode = host
  hw.gpu.blacklisted = no
  hw.initialOrientation = portrait
  hw.camera.back = emulated
  hw.camera.front = emulated
  vm.heapSize = 384
  hw.sensors.light = true
  hw.sensors.pressure = true
  hw.sensors.humidity = true
  hw.sensors.proximity = true
  hw.sensors.magnetic_field = true
  hw.sensors.orientation = true
  hw.sensors.temperature = true
  hw.useext4 = true
  kernel.path = /Users/its/Project/tools/android/nathan/nathan_x86/kernel-qemu
  kernel.parameters =  androidboot.hardware=goldfish clocksource=pit android.checkjni=1 androidboot.selinux=permissive
  kernel.newDeviceNaming = no
  kernel.supportsYaffs2 = no
  disk.ramdisk.path = /Users/its/Project/tools/android/nathan/nathan_x86/ramdisk.img
  disk.systemPartition.initPath = /Users/its/Project/tools/android/nathan/nathan_x86/system.img
  disk.systemPartition.size = 750m
  disk.dataPartition.path = /Users/its/Project/tools/android/nathan/nathan_x86/userdata-qemu.img
  disk.dataPartition.size = 1g
  avd.name = nathan_x86
.
QEMU options list:
emulator: argv[00] = "/Users/its/Project/tools/android/nathan/./sdk/tools/emulator64-x86"
emulator: argv[01] = "-netspeed"
emulator: argv[02] = "full"
emulator: argv[03] = "-netdelay"
emulator: argv[04] = "none"
emulator: argv[05] = "-show-kernel"
emulator: argv[06] = "-disable-hax"
emulator: argv[07] = "-no-reboot"
emulator: argv[08] = "-android-hw"
emulator: argv[09] = "/Users/its/Project/tools/android/nathan/nathan_x86/hardware-qemu.ini"
Concatenated QEMU options:
 /Users/its/Project/tools/android/nathan/./sdk/tools/emulator64-x86 -netspeed full -netdelay none -show-kernel -disable-hax -no-reboot -android-hw /Users/its/Project/tools/android/nathan/nathan_x86/hardware-qemu.ini
emulator: Starting QEMU main loop
emulator: registered 'boot-properties' qemud service
emulator: Using kernel serial device prefix: ttyS
emulator: Ramdisk image contains fstab.goldfish file
emulator: Found format of system partition: 'ext4'
emulator: Found format of userdata partition: 'ext4'
emulator: Found format of cache partition: 'ext4'
emulator: system partition format: ext4
emulator: Mapping 'system' partition image to /tmp/android-its/emulator-sVBu4e
emulator: nand_add_dev: system,size=0x2ee00000,file=/tmp/android-its/emulator-sVBu4e,pagesize=512,extrasize=0
emulator: userdata partition format: ext4
emulator: nand_add_dev: userdata,size=0x40000000,file=/Users/its/Project/tools/android/nathan/nathan_x86/userdata-qemu.img,pagesize=512,extrasize=0
emulator: cache partition format: ext4
emulator: nand_add_dev: cache,size=0x4200000,file=/Users/its/Project/tools/android/nathan/nathan_x86/cache.img,pagesize=512,extrasize=0
emulator: Adding boot property: 'dalvik.vm.heapsize' = '384m'
emulator: Adding boot property: 'qemu.sf.lcd_density' = '420'
emulator: Adding boot property: 'qemu.hw.mainkeys' = '0'
emulator: Adding boot property: 'qemu.sf.fake_camera' = 'both'
emulator: Initializing hardware OpenGLES emulation support
emulator: Adding boot property: 'ro.opengles.version' = '131072'
emulator: Kernel parameters: qemu.gles=1 qemu=1 console=ttyS0 android.qemud=ttyS1 androidboot.hardware=goldfish clocksource=pit android.checkjni=1 androidboot.selinux=permissive ndns=2
emulator:     trying to find: /Users/its/Project/tools/android/nathan/sdk/tools/bios.bin

emulator:     trying to find: /Users/its/Project/tools/android/nathan/sdk/tools/lib/pc-bios/bios.bin

emulator:     trying to find: /Users/its/Project/tools/android/nathan/sdk/tools/vgabios-cirrus.bin

emulator:     trying to find: /Users/its/Project/tools/android/nathan/sdk/tools/lib/pc-bios/vgabios-cirrus.bin

serial0 console
emulator: Forcing ro.adb.qemud to "0".
emulator: control console listening on port 5554, ADB on port 5555
emulator: sent '0012host:emulator:5555' to ADB server
emulator: android_hw_fingerprint_init: fingerprint qemud listen service initialized

emulator: Skipping metrics reporting: No user opt-in.
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.67+ ([email protected]) (gcc version 4.8 (GCC) ) #3 PREEMPT Tue Sep 16 19:46:22 CEST 2014
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
[    0.000000]  BIOS-e820: 000000005fff0000 - 0000000060000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.4 present.
[    0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x100000
[    0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
[    0.000000] Warning only 895MB will be used.
[    0.000000] Use a HIGHMEM enabled kernel.
[    0.000000] init_memory_mapping: 0000000000000000-0000000037fe1000
[    0.000000] RAMDISK: 5fefd000 - 5fff0000
[    0.000000] Allocated new RAMDISK: 37eee000 - 37fe02fe
[    0.000000] Move RAMDISK from 000000005fefd000 - 000000005ffef2fd to 37eee000 - 37fe02fd
[    0.000000] ACPI Error: A valid RSDP was not found (20120320/tbxfroot-219)
[    0.000000] 895MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37fe1000
[    0.000000]   low ram: 0 - 37fe1000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037fe1
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0005fff0
[    0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ffc0000)
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227440
[    0.000000] Kernel command line: qemu.gles=1 qemu=1 console=ttyS0 android.qemud=ttyS1 androidboot.hardware=goldfish clocksource=pit android.checkjni=1 androidboot.selinux=permissive ndns=2
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 899460k/917380k available (4590k kernel code, 17468k reserved, 2136k data, 312k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffe3000 - 0xfffff000   ( 112 kB)
[    0.000000]     vmalloc : 0xf87e1000 - 0xfffe1000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7fe1000   ( 895 MB)
[    0.000000]       .init : 0xc0892000 - 0xc08e0000   ( 312 kB)
[    0.000000]       .data : 0xc067b9f7 - 0xc0891d00   (2136 kB)
[    0.000000]       .text : 0xc0200000 - 0xc067b9f7   (4590 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Console: colour *CGA 80x25
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3100.065 MHz processor.
[    0.010181] Calibrating delay loop (skipped), value calculated using timer frequency.. 6200.13 BogoMIPS (lpj=31000650)
[    0.010430] pid_max: default: 32768 minimum: 301
[    0.010993] Security Framework initialized
[    0.020277] SELinux:  Initializing.
[    0.021218] Mount-cache hash table entries: 512
[    0.027984] Initializing cgroup subsys debug
[    0.028078] Initializing cgroup subsys cpuacct
[    0.028103] Initializing cgroup subsys freezer
[    0.029430] CPU: AMD QEMU Virtual CPU version 0.10.50 stepping 03
[    0.033877] Performance Events: Broken PMU hardware detected, using software events only.
[    0.043213] NET: Registered protocol family 16
[    0.059152] PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=0
[    0.059217] PCI: Using configuration type 1 for base access
[    0.126651] bio: create slab <bio-0> at 0
[    0.128380] ACPI: Interpreter disabled.
[    0.129551] vgaarb: loaded
[    0.131694] SCSI subsystem initialized
[    0.134827] usbcore: registered new interface driver usbfs
[    0.135321] usbcore: registered new interface driver hub
[    0.135845] usbcore: registered new device driver usb
[    0.138091] PCI: Probing PCI hardware
[    0.138741] PCI host bridge to bus 0000:00
[    0.139042] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.139101] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.143781] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000]
[    0.151279] cfg80211: Calling CRDA to update world regulatory domain
[    0.155208] NetLabel: Initializing
[    0.155231] NetLabel:  domain hash size = 128
[    0.155249] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.155716] NetLabel:  unlabeled traffic allowed by default
[    0.156645] Switching to clocksource pit
[    0.197307] pnp: PnP ACPI: disabled
[    0.225603] NET: Registered protocol family 2
[    0.226662] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.229698] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.234351] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.235481] TCP: Hash tables configured (established 131072 bind 65536)
[    0.235551] TCP: reno registered
[    0.235635] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.235746] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.236812] NET: Registered protocol family 1
[    0.236962] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.237033] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.237184] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.240314] Trying to unpack rootfs image as initramfs...
[    0.555567] Freeing initrd memory: 972k freed
[    0.558105] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.567382] goldfish_new_pdev goldfish_device_bus at ff001000 irq 4
[    0.567453] goldfish_new_pdev goldfish-battery at ff010000 irq 5
[    0.567508] goldfish_new_pdev goldfish_nand at ff011000 irq -1
[    0.567532] goldfish_new_pdev qemu_pipe at ff012000 irq 6
[    0.567553] goldfish_new_pdev goldfish_mmc at ff005000 irq 7
[    0.567575] goldfish_new_pdev goldfish_tty at ff014000 irq 9
[    0.567597] goldfish_new_pdev goldfish_tty at ff015000 irq 10
[    0.567626] goldfish_new_pdev goldfish_fb at ff016000 irq 11
[    0.567648] goldfish_new_pdev goldfish_events at ff017000 irq 3
[    0.567670] goldfish_new_pdev goldfish_audio at ff004000 irq 14
[    0.568204] goldfish_pdev_worker registered goldfish_device_bus
[    0.568892] goldfish_pdev_worker registered goldfish-battery
[    0.569852] goldfish_pdev_worker registered goldfish_nand
[    0.570542] goldfish_pdev_worker registered qemu_pipe
[    0.571330] goldfish_pdev_worker registered goldfish_mmc
[    0.572053] goldfish_pdev_worker registered goldfish_tty
[    0.573288] audit: initializing netlink socket (disabled)
[    0.573745] type=2000 audit(1478766779.570:1): initialized
[    0.583134] goldfish_pdev_worker registered goldfish_tty
[    0.583494] goldfish_pdev_worker registered goldfish_fb
[    0.583813] goldfish_pdev_worker registered goldfish_events
[    0.584132] goldfish_pdev_worker registered goldfish_audio
[    0.701839] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.728779] VFS: Disk quotas dquot_6.5.2
[    0.729420] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.737996] fuse init (API version 7.18)
[    0.739506] msgmni has been set to 1758
[    0.745166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.745273] io scheduler noop registered
[    0.745317] io scheduler deadline registered
[    0.745419] io scheduler cfq registered (default)
[    0.746396] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.747072] goldfish_fb goldfish_fb.0: no framebuffer memblock
[    0.747227] ------------[ cut here ]------------
[    0.747353] WARNING: at mm/page_alloc.c:2262 __alloc_pages_nodemask+0x11f/0x536()
[    0.747384] Hardware name: 
[    0.747410] Modules linked in:
[    0.747588] Pid: 1, comm: swapper Not tainted 3.4.67+ #3
[    0.747626] Call Trace:
[    0.747855]  [<c021a68f>] warn_slowpath_common+0x63/0x78
[    0.747904]  [<c02813dc>] ? __alloc_pages_nodemask+0x11f/0x536
[    0.747933]  [<c021a708>] warn_slowpath_null+0xf/0x13
[    0.747963]  [<c02813dc>] __alloc_pages_nodemask+0x11f/0x536
[    0.747991]  [<c0299bcd>] ? insert_vmalloc_vmlist+0x3f/0x55
[    0.748018]  [<c029a940>] ? __get_vm_area_node.isra.37+0xea/0xf4
[    0.748047]  [<c02207cc>] ? iomem_map_sanity_check+0xa3/0xc1
[    0.748089]  [<c0204744>] dma_generic_alloc_coherent+0x54/0xa5
[    0.748117]  [<c02046f0>] ? dma_set_mask+0x31/0x31
[    0.748146]  [<c0660321>] goldfish_fb_probe+0x3ea/0x3f9
[    0.748176]  [<c02f03a3>] ? sysfs_create_link+0xa/0xc
[    0.748204]  [<c04510ea>] platform_drv_probe+0xc/0xe
[    0.748229]  [<c0450393>] driver_probe_device+0x74/0x152
[    0.748255]  [<c04504e4>] __driver_attach+0x47/0x63
[    0.748282]  [<c044f06f>] bus_for_each_dev+0x55/0x5f
[    0.748311]  [<c0450059>] driver_attach+0x14/0x16
[    0.748335]  [<c045049d>] ? __device_attach+0x2c/0x2c
[    0.748363]  [<c044fd40>] bus_add_driver+0xd2/0x1d6
[    0.748408]  [<c08a5a72>] ? genericbl_driver_init+0xf/0xf
[    0.748436]  [<c08a5a72>] ? genericbl_driver_init+0xf/0xf
[    0.748462]  [<c0450901>] driver_register+0x70/0xbf
[    0.748488]  [<c08a5a72>] ? genericbl_driver_init+0xf/0xf
[    0.748515]  [<c0451474>] platform_driver_register+0x38/0x3a
[    0.748558]  [<c08a5a7f>] goldfish_fb_init+0xd/0xf
[    0.748597]  [<c020114a>] do_one_initcall+0x6a/0x104
[    0.748628]  [<c089274b>] kernel_init+0xd1/0x146
[    0.748655]  [<c089267a>] ? start_kernel+0x295/0x295
[    0.748682]  [<c067adf6>] kernel_thread_helper+0x6/0xd
[    0.748801] ---[ end trace c5f1809d686449c3 ]---
[    0.748901] allocating frame buffer 1080 * 1920, got   (null)
[    0.749417] goldfish_fb: probe of goldfish_fb.0 failed with error -12
[    0.751652] Non-volatile memory driver v1.3
[    0.754366] console [ttyS0] enabled
[    0.755835] Linux agpgart interface v0.103
[    0.759941] [drm] Initialized drm 1.1.0 20060810
[    0.760054] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[    0.777441] brd: module loaded
[    0.785697] loop: module loaded
[    0.785812] goldfish_audio_probe
[    0.786299] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.786421] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.788920] Loading iSCSI transport class v2.0-870.
[    0.799310] goldfish nand dev0: size 2ee00000, page 512, extra 0, erase 0
[    0.808627] goldfish nand dev1: size 40000000, page 512, extra 0, erase 0
[    0.811092] goldfish nand dev2: size 4200000, page 512, extra 0, erase 0
[    0.814571] tun: Universal TUN/TAP device driver, 1.6
[    0.814619] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    0.815256] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[    0.815781] ne2k-pci 0000:00:02.0: found PCI INT A -> IRQ 9
[    0.818165] eth0: RealTek RTL-8029 found at 0xc000, IRQ 9, 52:54:00:12:34:56.
[    0.820003] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.820053] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.820818] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    0.820873] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.821556] e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
[    0.821621] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[    0.822159] sky2: driver version 1.30
[    0.825727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.826400] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.826907] uhci_hcd: USB Universal Host Controller Interface driver
[    0.827775] usbcore: registered new interface driver usblp
[    0.827833] Initializing USB Mass Storage driver...
[    0.828278] usbcore: registered new interface driver usb-storage
[    0.828326] USB Mass Storage support registered.
[    0.828829] usbcore: registered new interface driver libusual
[    0.829434] mousedev: PS/2 mouse device common for all mice
[    0.829611] *** events probe ***
[    0.829787] events_probe() addr=0xf87fa000 irq=3
[    0.829922] events_probe() keymap=qwerty2
[    0.831802] input: qwerty2 as /devices/virtual/input/input0
[    0.835829] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    0.836340] rtc0: alarms up to one day, 114 bytes nvram
[    0.843778] device-mapper: uevent: version 1.0.3
[    0.846300] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    0.847227] cpuidle: using governor ladder
[    0.847306] cpuidle: using governor menu
[    0.860973] usbcore: registered new interface driver usbhid
[    0.861030] usbhid: USB HID core driver
[    0.862298] ashmem: initialized
[    0.863281] logger: created 256K log 'log_main'
[    0.863751] logger: created 256K log 'log_events'
[    0.864242] logger: created 256K log 'log_radio'
[    0.864691] logger: created 256K log 'log_system'
[    0.866006] Netfilter messages via NETLINK v0.30.
[    0.866384] nf_conntrack version 0.5.0 (14069 buckets, 56276 max)
[    0.868220] ctnetlink v0.93: registering with nfnetlink.
[    0.871403] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.873612] TCP: cubic registered
[    0.876085] NET: Registered protocol family 10
[    0.880280] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.881564] IPv6 over IPv4 tunneling driver
[    0.891981] mmc0: new SD card at address e118
[    0.894102] NET: Registered protocol family 17
[    0.894333] NET: Registered protocol family 15
[    0.898797] mmcblk0: mmc0:e118 SU02G 128 MiB 
[    0.899542] registered taskstats version 1
[    0.910487] console [netcon0] enabled
[    0.910554] netconsole: network logging started
[    0.914124] Freeing unused kernel memory: 312k freed
[    0.923275]  mmcblk0:
[    0.932449] Write protecting the kernel text: 4592k
[    0.933526] Write protecting the kernel read-only data: 1812k
[    1.030887] type=1403 audit(1478766780.020:2): policy loaded auid=4294967295 ses=4294967295
[    1.594639] init: /dev/hw_random not found
[    1.626047] init: /dev/hw_random not found
[    1.641860] EXT4-fs (mtdblock0): INFO: recovery required on readonly filesystem
[    1.641953] EXT4-fs (mtdblock0): write access will be enabled during recovery
[    1.664427] EXT4-fs (mtdblock0): orphan cleanup on readonly fs
[    1.671022] EXT4-fs (mtdblock0): 2 orphan inodes deleted
[    1.671087] EXT4-fs (mtdblock0): recovery complete
[    1.677290] EXT4-fs (mtdblock0): mounted filesystem with ordered data mode. Opts: barrier=1
[    1.678370] fs_mgr: __mount(source=/dev/block/mtdblock0,target=/system,type=ext4)=0
[    1.724885] EXT4-fs (mtdblock1): recovery complete
[    1.725185] EXT4-fs (mtdblock1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    1.725522] fs_mgr: check_fs(): mount(/dev/block/mtdblock1,/data,ext4)=0
[    1.744734] fs_mgr: Running /system/bin/e2fsck on /dev/block/mtdblock1
[    1.877472] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    1.877729] e2fsck: /dev/block/mtdblock1: clean, 614/65536 files, 12631/262144 blocks
[    1.886786] EXT4-fs (mtdblock1): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
[    1.887109] fs_mgr: __mount(source=/dev/block/mtdblock1,target=/data,type=ext4)=0
[    1.893997] EXT4-fs (mtdblock2): recovery complete
[    1.894290] EXT4-fs (mtdblock2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    1.894647] fs_mgr: check_fs(): mount(/dev/block/mtdblock2,/cache,ext4)=0
[    1.904199] fs_mgr: Running /system/bin/e2fsck on /dev/block/mtdblock2
[    1.975417] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    1.975628] e2fsck: /dev/block/mtdblock2: clean, 11/4224 files, 1303/16896 blocks
[    1.981695] EXT4-fs (mtdblock2): mounted filesystem with ordered data mode. Opts: (null)
[    1.981958] fs_mgr: __mount(source=/dev/block/mtdblock2,target=/cache,type=ext4)=0
[    2.117931] init: Warning!  Service qemu-props needs a SELinux domain defined; please fix!
[    2.121623] init: Warning!  Service goldfish-logcat needs a SELinux domain defined; please fix!
[    2.216220] init: Warning!  Service goldfish-setup needs a SELinux domain defined; please fix!
[    2.278932] binder: 923:923 transaction failed 29189, size 0-0
[    2.336001] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[    2.546925] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[    2.595141] type=1400 audit(1478766781.580:3): avc:  denied  { entrypoint } for  pid=940 comm="init" path="/system/etc/install-recovery.sh" dev="mtdblock0" ino=1291 scontext=u:r:install_recovery:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[    3.314300] logd.auditd: start
[    3.372874] healthd: BatteryVoltagePath not found
[    3.426559] healthd: BatteryTemperaturePath not found
[    3.822136] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
[    3.982068] init: untracked pid 951 exited with status 0
[    3.991859] type=1400 audit(1478766782.970:4): avc: denied { setcurrent } for pid=967 comm="daemonsu" scontext=u:r:install_recovery:s0 tcontext=u:r:install_recovery:s0 tclass=process permissive=1
[    4.039484] type=1400 audit(1478766783.020:5): avc: denied { dyntransition } for pid=967 comm="daemonsu" scontext=u:r:install_recovery:s0 tcontext=u:r:init:s0 tclass=process permissive=1
shell@nathan_x86:/ $ [    7.587186] init: untracked pid 1021 exited with status 0
[   12.025626] type=1400 audit(1478766791.010:6): avc: denied { setcurrent } for pid=1038 comm="_service_system" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
[   12.072620] type=1400 audit(1478766791.050:7): avc: denied { dyntransition } for pid=1038 comm="_service_system" scontext=u:r:init:s0 tcontext=u:r:system_server:s0 tclass=process permissive=1
[   12.135326] type=1400 audit(1478766791.120:8): avc: denied { dyntransition } for pid=1039 comm="sed_service_app" scontext=u:r:init:s0 tcontext=u:r:untrusted_app:s0 tclass=process permissive=1
[   12.266412] type=1400 audit(1478766791.250:9): avc: denied { setgid } for pid=1044 comm="zygote" capability=6 scontext=u:r:untrusted_app:s0 tcontext=u:r:untrusted_app:s0 tclass=capability permissive=1
[   12.924032] type=1403 audit(1478766791.910:10): policy loaded auid=4294967295 ses=4294967295
[   13.002954] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   13.434075] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   13.731722] type=1403 audit(1478766792.710:11): policy loaded auid=4294967295 ses=4294967295
[   13.810645] init: untracked pid 1011 exited with status 1
[   13.845061] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   14.425865] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   15.780943] type=1403 audit(1478766794.760:12): policy loaded auid=4294967295 ses=4294967295
[   15.900202] init: untracked pid 1026 exited with status 1
[   15.934629] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   16.546233] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   16.648597] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   17.670895] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   17.925392] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   18.897278] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   20.006244] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   20.911240] EXT4-fs (mtdblock0): re-mounted. Opts: (null)
[   22.941625] init: untracked pid 1056 exited with status 1
[   23.000577] init: untracked pid 1078 exited with status 1
[   23.164120] init: untracked pid 1125 exited with status 0
[   62.587119] type=1400 audit(1478766841.570:13): avc: denied { module_request } for pid=1248 comm="iptables" kmod="ipt_TCPMSS" scontext=u:r:netd:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
[   63.381884] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[  123.382220] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[  183.377659] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[  218.876071] main[942]: segfault at bbd5359c ip b70bfe60 sp bf959c80 error 4 in libcrypto.so[b7077000+16c000]
[  218.937278] init: untracked pid 1038 killed by signal 9
[  218.937634] init: untracked pid 1039 killed by signal 9
[  218.937779] init: untracked pid 1044 killed by signal 9
[  218.937879] init: untracked pid 1045 killed by signal 9
[  218.946083] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[  229.524204] main[1336]: segfault at be91251c ip b70e6e60 sp bff00140 error 4 in libcrypto.so[b709e000+16c000]
[  229.550507] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[  229.570967] init: untracked pid 1348 killed by signal 9
[  229.571196] init: untracked pid 1349 killed by signal 9
[  229.571403] init: untracked pid 1355 killed by signal 9
[  229.571508] init: untracked pid 1356 killed by signal 9
[  229.607818] init: untracked pid 1422 killed by signal 9
[  232.062253] Clocksource tsc unstable (delta = 339958744 ns)
[  233.576538] type=1400 audit(1478767012.543:14): avc: denied { write } for pid=1438 comm="sed_service_app" path="socket:[3771]" dev="sockfs" ino=3771 scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_dgram_socket permissive=1
[  242.387623] main[1424]: segfault at be91259c ip b7106e60 sp bff8a580 error 4 in libcrypto.so[b70be000+16c000]
[  242.450738] init: untracked pid 1437 killed by signal 9
[  242.451720] init: untracked pid 1438 killed by signal 9
[  242.451880] init: untracked pid 1447 killed by signal 9
[  242.452007] init: untracked pid 1448 killed by signal 9
[  242.478895] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[  242.480617] init: untracked pid 1495 killed by signal 9
[  243.382089] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[  254.638850] main[1500]: segfault at be85351c ip b7198e60 sp bfcfb800 error 4 in libcrypto.so[b7150000+16c000]
[  254.664375] init: untracked pid 1531 killed by signal 9
[  254.664543] init: untracked pid 1532 killed by signal 9
[  254.665890] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[  254.673640] init: untracked pid 1518 killed by signal 9
[  254.673876] init: untracked pid 1519 killed by signal 9
[  254.698737] init: untracked pid 1591 killed by signal 9
[  266.663604] main[1594]: segfault at be91371c ip b713de60 sp bfd29200 error 4 in libcrypto.so[b70f5000+16c000]
[  266.693930] init: untracked pid 1612 killed by signal 9
[  266.694233] init: untracked pid 1613 killed by signal 9
[  266.694453] init: untracked pid 1618 killed by signal 9
[  266.694591] init: untracked pid 1619 killed by signal 9
[  266.695856] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[  266.704084] init: untracked pid 1668 killed by signal 9
[  279.213805] main[1672]: segfault at bbc5779c ip b70c2e60 sp bfaff3c0 error 4 in libcrypto.so[b707a000+16c000]
[  279.230992] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[  279.249384] init: untracked pid 1689 killed by signal 9
[  279.249596] init: untracked pid 1690 killed by signal 9
[  279.249798] init: untracked pid 1696 killed by signal 9
[  279.249903] init: untracked pid 1697 killed by signal 9
[  279.280016] init: untracked pid 1741 killed by signal 9
[  293.331386] main[1746]: segfault at be95359c ip b7173e60 sp bfb6b9c0 error 4 in libcrypto.so[b712b000+16c000]
[  293.414126] init: untracked pid 1758 killed by signal 9
[  293.417908] init: untracked pid 1759 killed by signal 9
[  293.418443] init: untracked pid 1768 killed by signal 9
[  293.418614] init: untracked pid 1769 killed by signal 9
[  293.427168] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[  293.449024] init: untracked pid 1830 killed by signal 9
[  303.409588] healthd: battery l=50 v=0 t=0.0 h=2 st=2 chg=a
[  306.198419] main[1835]: segfault at be85351c ip b713de60 sp bfae9140 error 4 in libcrypto.so[b70f5000+16c000]
[  306.232873] init: untracked pid 1849 killed by signal 9
[  306.233104] init: untracked pid 1850 killed by signal 9
[  306.233380] init: untracked pid 1856 killed by signal 9
[  306.233540] init: untracked pid 1857 killed by signal 9
[  306.259399] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[  306.260517] init: untracked pid 1906 killed by signal 9
[  318.748411] main[1911]: segfault at bbd5771c ip b70dfe60 sp bff55600 error 4 in libcrypto.so[b7097000+16c000]
[  318.778952] init: untracked pid 1922 killed by signal 9
[  318.779145] init: untracked pid 1928 killed by signal 9
[  318.779280] init: untracked pid 1929 killed by signal 9
[  318.783568] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[  318.818271] init: untracked pid 1921 killed by signal 9
[  318.818427] init: untracked pid 1975 killed by signal 9
[  330.199895] main[1980]: segfault at bbd5759c ip b70c8e60 sp bffc51c0 error 4 in libcrypto.so[b7080000+16c000]
[  330.268056] init: untracked pid 1988 killed by signal 9
[  330.270462] init: untracked pid 1989 killed by signal 9
[  330.270800] init: untracked pid 2004 killed by signal 9
[  330.270939] init: untracked pid 2005 killed by signal 9
[  330.277092] init: Warning!  Service zygote needs a SELinux domain defined; please fix!
[  330.299303] init: untracked pid 2060 killed by signal 9
[  341.298019] main[2064]: segfault at be95779c ip b7180e60 sp bffefbc0 error 4 in libcrypto.so[b7138000+16c000]
[  341.344660] init: untracked pid 2080 killed by signal 9
[  341.345608] ini

init fails due to 404 downloading tools

Hi I get

�[A valid emulator/adb cannot be find. Downloading sdk from official site...�
Downloading tools_r25.1.7-.zip�
GET https://dl.google.com/android/repository/tools_r25.1.7-.zip...�
Impossible to download the file -> HTTP Error 404: Not Found�

trying to do nathan init.