(used external assets in screenshots: In-game Debug Console and Runtime Inspector & Hierarchy)
Available on Asset Store: https://www.assetstore.unity3d.com/en/#!/content/114126
Forum Thread: https://forum.unity.com/threads/released-dynamic-panels-draggable-resizable-dockable-and-stackable-ui-panels.523106/
WebGL Demo: http://yasirkula.net/DynamicPanelsDemo/
This asset helps you create dynamic panels using Unity's UI system. These panels can be dragged around, resized, docked to canvas edges or to one another and stacked next to each other as separate tabs.
- Supports all canvas modes (Screen Space and World Space)
- Supports multiple canvases (panels can be moved between canvases by dragging)
- Has an extensive Scripting API to create/manipulate panels by code
- Each panel costs 3 additional batches (this number can increase with each tab using a custom icon)
First, import DynamicPanels.unitypackage to your project. Afterwards, add Dynamic Panels Canvas component to the RectTransform that you want to move your panels inside. This RectTransform doesn't have to be the Canvas object. It can be any child of it and can be of any custom size.
There are two ways to create panels: by using the GUI of Dynamic Panels Canvas or via Scripting API. There are also two types of panels: free panels that can be moved around and resized freely and docked panels that are moved by the layout system, depending on where it is docked to. A panel can have multiple tabs.
To add a new free panel using the Dynamic Panels Canvas component, simply click the Add New button under the Free Panels section. Then, click the + button to start adding tabs to that panel. Each tab has 4 properties: the content (RectTransform) that will be displayed while the tab is active, a label, an optional icon, and the minimum size of the content associated with the tab. To remove a free panel, select a tab inside the panel and click the Remove Selected button.
You can create docked panels by using the buttons under the Docked Panels section. To create a panel that is docked to the edge of the Dynamic Panels Canvas, use the buttons next to "Dock new panel to canvas:". You can click a panel inside the preview zone (immediately under the Docked Panels section) and edit its tabs. You can also dock a panel to the selected panel using the buttons next to "Dock new panel inside:".
When you are done, click the Play button to see the magic happen!
There are a couple of settings in Dynamic Panels Canvas that you may want to play with:
- Leave Free Space: when enabled, there will always be some free space in the canvas that docked panels can't fill. Otherwise, docked panels will fill the whole canvas
- Minimum Free Space: if Leave Free Space is enabled, this value will determine the minimum free space
- Panel Resizable Area Length: the length of the invisible area at each side of a panel that allows users to resize a panel
- Canvas Anchor Zone Length: the length of the dockable area of the Dynamic Panels Canvas. When a tab is dragged and dropped onto that area, it will be docked to the edge of the Dynamic Panels Canvas
- Panel Anchor Zone Length: the length of the dockable area inside a panel. When a tab is dragged and dropped onto that area, it will be docked to the panel. This area is enabled only for docked panels (you can't dock panels to free panels)
- Initial Size: (docked panels only) determines the initial size of a docked panel. This is achieved by programmatically resizing the panel after it is created, so this operation may affect the adjacent panels' sizes, as well. This value won't have any effect if left as (0,0)
NOTE: if you change the Resources/DynamicPanel.prefab, also make sure that the Panel's Header Height property is equal to the distance between the top of the panel and the bottom of the PanelHeader child object (which holds the tabs runtime).
Adding this component to a GameObject will make the cursor dynamic i.e. its texture will change when it enters a panel's resizable area.
Note that this component won't have any effect on Android and iOS.
Before using the scripting API, import DynamicPanels namespace to your script(s): using DynamicPanels;
static Panel CreatePanelFor( RectTransform content, DynamicPanelsCanvas canvas ): creates and returns a panel with a tab that is associated with the content. The panel is created inside the specified Dynamic Panels Canvas. If the content is already part of a panel, then the existing panel is returned
static PanelTab GetAssociatedTab( RectTransform content ): if content is associated with a tab, returns it; otherwise returns null
DynamicPanelsCanvas Canvas { get; }: returns the Dynamic Panels Canvas that this panel currently belongs to
PanelGroup Group { get; }: returns the PanelGroup that this panel currently belongs to (more on that later)
Vector2 Position { get; }: returns the anchored position of the panel. Anchor of a panel is located at its bottom-left corner
Vector2 Size { get; }: returns the size of the panel
Vector2 MinSize { get; }: returns the minimum size of the panel. This value is calculated runtime using the minimum size values of the panel's tab(s)
int NumberOfTabs { get; }: returns the number of tabs on the panel
int ActiveTab { get; set; }: returns the index of the currently selected tab. Its value can be changed, as well
PanelTab this[int tabIndex] { get; }: returns the tab at the specified index
bool IsDocked { get; } }: returns whether the panel is a docked panel or a free panel
PanelTab AddTab( RectTransform tabContent, int tabIndex = -1 ): adds a new tab to the panel and sets tabContent as its content. If tabIndex is not specified, then the tab will be inserted to the end of the tabs list. Be aware that a newly created tab will have a default label/icon/minimum size and it is highly recommended to customize these values afterwards
PanelTab AddTab( PanelTab tab, int tabIndex = -1 ): moves the specified tab to this panel
PanelTab AddTab( string tabID, int tabIndex = -1 ): same as above
void RemoveTab( int tabIndex ): removes a tab from the panel. Be careful when calling this function because the content associated with the tab will also be destroyed!
void RemoveTab( PanelTab tab ): same as above
void RemoveTab( string tabID ): same as above
int GetTabIndex( RectTransform tabContent ): returns the index of a tab, or -1 if the tab is not part of the panel
int GetTabIndex( PanelTab tab ): same as above
int GetTabIndex( string tabID ): same as above
PanelTab GetTab( RectTransform tabContent ): returns the tab that is associated with tabContent, or null if it is not a part of the panel
void DockToRoot( Direction direction ): docks the panel to an edge of the Dynamic Panels Canvas
void DockToPanel( IPanelGroupElement anchor, Direction direction ): docks the panel to another panel or panel group. It is not possible to dock a panel to a free panel
void Detach(): if the panel is docked, detaches it so that it becomes a free panel
Panel DetachTab( int tabIndex ): detaches a tab from the panel, creates a new panel with it and returns the new panel. If the tab is the only tab on the panel, then the panel itself is detached and returned
Panel DetachTab( PanelTab tab ): same as above
void BringForward(): if the panel is free, brings it forwards so that it is drawn above all other panels
void MoveTo( Vector2 screenPoint ): moves the panel to the specified point on the screen (panel's center will be aligned to the point)
void ResizeTo( Vector2 newSize ): resizes the panel. If it is docked, then this change may affect the adjacent panels, as well
bool CanResizeInDirection( Direction direction ): returns whether or not the panel can be resized in the specified direction
IPanelGroupElement GetSurroundingElement( Direction direction ): if the panel is docked and if there is a panel/panel group in its specified vicinity, returns it
string ID { get; set; }: a unique identifier for this tab. It is mainly used in the serialization system but it can also be used to quickly access the tab (see PanelNotificationCenter.TryGetTab). To view/change a tab's ID from the Inspector, right click the DynamicPanelsCanvas component and select "Toggle Show IDs"
Panel Panel { get; }: returns the panel that the tab belongs to
int Index { get; set; }: returns the index of the tab among all tabs on the panel. Its value can be changed
RectTransform Content { get; }: returns the content (RectTransform) that is associated with the tab
Vector2 MinSize { get; set; }: gets or sets the minimum size of the content
Sprite Icon { get; set; }: gets or sets the icon of the tab
string Label { get; set; }: gets or sets the label of the tab
void AttachTo( Panel panel, int tabIndex = -1 ): same as Panel.AddTab
Panel Detach(): same as Panel.DetachTab
Panel groups are used to hold docked panels together. In a complex hierarchy, a panel group can have child panel groups as well. A panel group can be either horizontal or vertical. After a panel group is created and populated, it should be docked to a docked panel or panel group to be part of the layout.
PanelGroup( DynamicPanelsCanvas canvas, Direction direction ): creates a new panel group inside the specified DynamicPanelsCanvas. A Left or Right direction means a horizontal group, whereas a Top or Bottom direction means a vertical group. Panels in horizontal groups are always arranged from left to right and panels in vertical groups are always arranged from bottom to top; so it doesn't matter if the direction is Left or Right, or Top or Bottom. Only make sure that you don't set it to None
DynamicPanelsCanvas Canvas { get; private set; }: returns the Dynamic Panels Canvas that this group currently belongs to
PanelGroup Group { get; }: returns the parent PanelGroup that this group currently belongs to. Each Dynamic Panels Canvas has a horizontal panel group at its root that is the root of all docked panels/panel groups in the layout. Free panels, on the other hand, belong to a special panel group called UnanchoredPanelGroup, which should never be touched
Vector2 Position { get; }: returns the anchored position of the group. Anchor of a group is located at its bottom-left corner
Vector2 Size { get; }: returns the size of the group
Vector2 MinSize { get; }: returns the minimum size of the group. This value is calculated runtime recursively using the minimum size values of the docked panels' tabs
int Count { get; }: returns the number of elements (panels or child panel groups) in this group
IPanelGroupElement this[int index] { get; }: returns the element at the specified index in this group
void AddElement( IPanelGroupElement element ): adds an element to the end of the elements list. There is no RemoveElement function. Instead, when something changes in the layout (a panel is created/destroyed/moved between groups etc.), Dynamic Panels Canvas is notified and the whole layout is recalculated in LateUpdate. During this calculation, elements that belong to other groups are removed from their previous groups automatically
void AddElementBefore( IPanelGroupElement pivot, IPanelGroupElement element ): inserts an element in front of a specified element in this group
void AddElementAfter( IPanelGroupElement pivot, IPanelGroupElement element ): inserts an element after a specified element in this group
void DockToRoot( Direction direction ): docks the panel group to an edge of the Dynamic Panels Canvas
void DockToPanel( IPanelGroupElement anchor, Direction direction ): docks the panel group to another panel or panel group. It is not possible to dock a panel group to a free panel
void ResizeTo( Vector2 newSize ): resizes the panel group. This change affects the panels inside the group and may affect the adjacent panels. Make sure to dock the panel group to an element in the layout before calling this function
bool IsInSameDirection( Direction direction ): if this group is horizontal, returns true if direction is Left or Right. Otherwise, returns true if direction is Top or Bottom
IPanelGroupElement GetSurroundingElement( Direction direction ): if there is an element in the group's specified vicinity, returns it
void PrintHierarchy(): prints the hierarchical tree of this group to the console. May be useful for debugging purposes
string ID { get; set; }: a unique identifier for this canvas. It is used in the serialization system
void ForceRebuildLayoutImmediate(): immediately rebuilds the layout of the Dynamic Panels Canvas, if it is dirty. This process involves a couple of steps: elements in groups are validated (elements that no longer belong to that group are removed, empty child groups are deleted, etc.), minimum sizes are calculated, bounds of the elements are recalculated and so on. This step is quite processor intensive and therefore is not immediately called when e.g. a group is changed. Rather, it is called on LateUpdate to process everything in a batch (it is only called if something has changed). But this brings out an issue: if you are modifying the layout via Scripting API, you won't be able to access the correct size/position/minimum size values of layout elements (panels/panel groups), resize them in the same frame that you modify them (resizes happen instantly and do not count as modification, but the layout should be up-to-date) or iterate through the elements of a panel group correctly. To solve this issue, you can simply call this function after modifying the layout to rebuild it immediately
void SaveLayout(): shorthand for PanelSerialization.SerializeCanvas
void LoadLayout(): shorthand for PanelSerialization.DeserializeCanvas
This helper class can save&load the layout of a dynamic canvas via binary serialization at runtime. In the serialized data, tabs are referenced by their IDs, so these IDs should remain consistent. To test serialization in Unity editor while in Play mode, right click the DynamicPanelsCanvas component and select "Save Layout" or "Load Layout".
static byte[] SerializeCanvasToArray( DynamicPanelsCanvas canvas ): serializes the current state of the panels inside the canvas and returns the serialized data. You are responsible for storing this data in a storage
static void DeserializeCanvasFromArray( DynamicPanelsCanvas canvas, byte[] data ): deserializes the serialized data and restores the saved state of the panels
static void SerializeCanvas( DynamicPanelsCanvas canvas ): internally calls SerializeCanvasToArray and saves the data to PlayerPrefs (using the ID of the canvas as key)
static void DeserializeCanvas( DynamicPanelsCanvas canvas ): if a saved data for the canvas exists in PlayerPrefs, loads it and then calls DeserializeCanvasFromArray internally
Notification center raises certain events during panels' lifecycle. It also holds a reference to each alive panel and therefore, can be used to iterate over all panels conveniently.
static event PanelDelegate OnPanelCreated: raised when a new panel is created. PanelDelegate takes a Panel parameter
static event PanelDelegate OnPanelDestroyed: raised when a panel is destroyed
static event PanelDelegate OnPanelBecameActive: raised when a panel becomes active in the hierarchy
static event PanelDelegate OnPanelBecameInactive: raised when a panel becomes inactive in the hierarchy
static int NumberOfPanels { get; }: returns the number of alive panels (including inactive panels)
static Panel GetPanel( int panelIndex ): returns a panel (it can be inactive)
static bool TryGetTab( string tabID, out PanelTab tab ): checks whether or not a tab with the specified ID exists and returns it in the tab parameter
The following example code creates 3 panels -one with 2 tabs- and generates a L-shaped layout with them. The final output can be seen in the following picture:
using UnityEngine;
using DynamicPanels;
public class PanelCreator : MonoBehaviour
{
public DynamicPanelsCanvas canvas;
public RectTransform content1, content2, content3, content4;
public string tabLabel1, tabLabel2, tabLabel3, tabLabel4;
public Sprite tabIcon1, tabIcon2, tabIcon3, tabIcon4;
void Start()
{
// Create 3 panels
Panel panel1 = PanelUtils.CreatePanelFor( content1, canvas );
Panel panel2 = PanelUtils.CreatePanelFor( content2, canvas );
Panel panel3 = PanelUtils.CreatePanelFor( content3, canvas );
// Add a second tab to the first panel
panel1.AddTab( content4 );
// Set the labels and the (optional) icons of the tabs
panel1[0].Icon = tabIcon1; // first tab
panel1[0].Label = tabLabel1;
panel1[1].Icon = tabIcon4; // second tab
panel1[1].Label = tabLabel4;
panel2[0].Icon = tabIcon2;
panel2[0].Label = tabLabel2;
panel3[0].Icon = tabIcon3;
panel3[0].Label = tabLabel3;
// Set the minimum sizes of the contents associated with the tabs
panel1[0].MinSize = new Vector2( 300f, 300f ); // first tab
panel1[1].MinSize = new Vector2( 300f, 300f ); // second tab
panel2[0].MinSize = new Vector2( 300f, 300f );
panel3[0].MinSize = new Vector2( 300f, 300f );
// Create a vertical panel group
PanelGroup groupLeftVertical = new PanelGroup( canvas, Direction.Top ); // elements are always arranged from bottom to top
groupLeftVertical.AddElement( panel1 ); // bottom panel
groupLeftVertical.AddElement( panel2 ); // top panel
// Dock the elements to the Dynamic Panels Canvas (the order is important)
panel3.DockToRoot( Direction.Bottom );
groupLeftVertical.DockToRoot( Direction.Left );
// Rebuild the layout before attempting to resize elements or read their correct sizes/minimum sizes
canvas.ForceRebuildLayoutImmediate();
// It is recommended to manually resize layout elements that are created by code and docked.
// Otherwise, their sizes will not be deterministic. In this case, we are resizing them to their minimum size
groupLeftVertical.ResizeTo( new Vector2( groupLeftVertical.MinSize.x, groupLeftVertical.Size.y ) );
panel3.ResizeTo( new Vector2( panel3.Size.x, panel3.MinSize.y ) );
}
}
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent