###New development of Hue plugin for use in smarthome.py (C) Michael Würtenberger 2014, 2015 version 1.6 develop Updated on v1.7 Hue API
Philips hue bridge, multiple bridges allowed
Typical configuration for 3 bridges
[HUE]
class_name = HUE
class_path = plugins.hue
hue_user = 38f625a739562a8bd261ab9c7f5e62c8, 38f625a739562a8bd261ab9c7f5e62c8, 38f625a739562a8bd261ab9c7f5e62c8
hue_ip = 192.168.2.2,192.168.2.3,192.168.2.4
hue_port = 80,80,80
cycle_lamps = 3
cycle_bridges = 30
default_transitionTime = 0.4
Minimal configuration for single bridge an default settings
[HUE]
class_name = HUE
class_path = plugins.hue
hue_user = 38f625a739562a8bd261ab9c7f5e62c8
hue_ip = 192.168.2.2
A user name for the hue bridge. Usually this is a hash value of 32 hexadecimal digits. If you would like to use more than on bridge, you have to specify all ip addresses, ports and users accordingly. All users are separated with comma (',') ! If the user/hash is not yet authorized, you can use sh.hue.authorizeuser() (via interactive shell or via logic) to authorize it. The link button must be pressed before.
IP or host name of the hue bridge. There is no default, please us a valid ip address. If you would like to use more than on bridge, you have to specify all ip addresses, ports and users accordingly. All ip's are separated with comma (',') !
Port number of the hue bridge. Default 80. Normally there is no need to change that. If you would like to use more than on bridge, you have to specify all ip addresses, ports and users accordingly. All ports are separated with comma (',') !
Cycle in seconds to how often update the state of the lights in smarthome. Default value is 10 seconds. Note: The hue bridge has no notification feature. Therefore changes can only be detected via polling.
Cycle in seconds to how often update the state of the bridges in smarthome. Default value is 60 seconds Note: The hue bridge has no notification feature. Therefore changes can only be detected via polling.
Time in seconds how fast check states of the lamps are changed through the bridge itself. If you don't set a value in the item, this value is used. Note: The hue bridge has no notification feature. Therefore changes can only be detected via polling.
Specify the number of the hue_bridge_id. Via this parameter the right hue connection is established. The numbers start with 0. There must be no missing number in between !
Specify the lamp id. Via this parameter the right lamp on the hue connection is established. The numbers are the corresponding numbers of the lamp Id in the bridge. They normally start with 0. There must be a hue_bridge_id attached to this item as well. If not, a default value of 0 will be set.
Specify the group id. Via this parameter the right group on the hue connection is established. The numbers are the corresponding numbers of the lgroup Id in the bridge. They normally start with 1. There must be a hue_bridge_id attached to this item as well. If not, a default value of 1 will be set.
Specify the lamp type because of different color garamut parameters Default would be 0 if not defined. There are currently two groups of lamps: Group 0 consists of hue bulb lamps, there hue_lamp_type = 0 Group 1 consists of LivingColors Bloom, Aura and Iris lamps, there hue_lamp_type = 1 Group 2 consists of standard - non known type recommended by Philips, there hue_lamp_type = 2
Please refer to the specs of the API 1.4 of the hue at http://www.developers.meethue.com/documentation/lights-api. Readable means you can set a hue_listen attribute in a item with the corresponding name Writable means you can set a hue_send attribute in a item with the corresponding name
All Attributes for the Light state (besides 'on') can only be set, if the light is on!
Attribute Type Range Readable Writable 'on' bool False / True yes yes 'bri' num 0-255 yes yes 'hue' num 0-65535 yes yes 'sat' num 0-255 yes yes 'ct' num 153 - 500 yes yes 'alert' str 'none' or 'select' or 'lselect' yes yes 'effect' str 'none' or 'colorloop' yes yes 'reachable' bool False / True yes no 'hue_transitionTime' num 0-65535 no yes 'col_r' num 0-255 no yes 'col_g' num 0-255 no yes 'col_b' num 0-255 no yes
Instead of implementing the 'xy' state attribute, 'col_r', 'col_g' and 'col_b' have been implemented to allow the color control directly from a SmartVISU widget (e.g. Colordisc).
For a basic control of the the lights you only need to implement the first 4 to 5 attributes of the Lights API ('on', 'bri', 'hue', 'sat' and 'ct'). The rest of the attributes is only needed, if you want to do MORE.
Attribute Type Range Readable Writable 'type' str text yes no 'name' str text yes no 'modelid' str text yes no 'uniqueid' str text yes no 'manufacturername' str text yes no 'swversion' str text yes no
Attribute Type Range Readable Writable 'scene' str scene name in bridge no yes
Attribute Type Range Readable Writable 'bridge_name' str text yes no 'swupdate' dict object yes no 'whitelist' dict object yes no 'apiversion' str text yes no 'bridge_swversion' str text yes no 'linkbutton' bool False / True yes no 'ipaddress' str text yes no 'mac' str text yes no 'netmask' str text yes no 'gateway' str text yes no 'dhcp' bool False / True yes no 'portalservices' bool False / True yes no 'portalconnection' str text yes no 'portalstate' dict object yes no 'UTC' str text yes no 'localtime' str text yes no 'timezone' str text yes no 'zigbeechannel' num 1-13 yes no 'errorstatus' bool False / True yes no
Attribute Type Range Readable Writable 'errorstatus' bool False / True yes no
errorstatus represents the status of the link between sm.hy plugin and bridge. A status True reflects and error state in the communication.
Specifies the writable attribute which is send to the lamp when this item is altered. In addition to hue_send an hue_lamp_id and hue_bridge_id (optional for one bridge) has to be set.
Specifies the readable attribute which is updated on a scheduled timer from the lamps and bridges. In addition to hue_send an hue_lamp_id and hue_bridge_id (optional for one bridge) has to be set.
This parameter specifies the time, which the lamp take to reach the a newly set value. This is done by interpolation of the values inside the lamp. This parameter is optional. If not set the time default is 0.1 second. In addition to hue_send an hue_lamp_id and hue_bridge_id has to be set. This could be done in upper layers. If it's missing the parameter is removed.
If you would like to use a DPT3 dimmer, you have to specify a subitem to the dimmed hue item. To this subitem you link the knx DPT3 part. You can control the dimming via some parameters, which have to be specified in this subitem.
DPT3 dimming could be use with every item which has the type = num (even if it's not hue related !)
If you are using the DPT3 dimmer, please take into account that there is a lower limit of timing. A lower value than 0.2 seconds should be avoided, regarding the performance of the overall system. Nevertheless to get nice and smooth results of dimming, please set the parameters of hue_transitionTime and hue_dim_time equally. In that case, the lamp interpolates the transition as quick as the steps of the dimmer function happen. If the lamp is set to off (e.g. attribute 'on' = False), changes could be not written to the lamp. Warnings in the log will appear. The lamp doesn't support this behaviour. In case of starting dimming the brightness of the lamp, the plugin automatically sets the lamp on and starts dimming with the last value.
Parameter which determines the maximum of the dimmer range. Without this parameter DPT3 dimming will not work.
Parameter which determines the step size. In addition to hue_dim_max this parameter has to be set. If not a warning will be written and a default value of 25 will be set.
Parameter which determines the time, the dimmer takes for making on step. In addition to hue_dim_max this parameter has to be set. If not a warning will be written and a default value of 1 will be set.
[keller]
[[hue]]
# if hue_lamp_id and hue_bridge_id is not set, it is searched in a higher layer
hue_lamp_id = 1
hue_bridge_id = 0
hue_lamp_type = 0
[[[bridge_name]]]
type = str
hue_listen = bridge_name
[[[zigbeechannel]]]
type = num
hue_listen = zigbeechannel
[[[mac]]]
type = str
hue_listen = mac
[[[dhcp]]]
type = bool
hue_listen = dhcp
[[[ipaddress]]]
type = str
hue_listen = ipaddress
[[[netmask]]]
type = str
hue_listen = netmask
[[[gateway]]]
type = str
hue_listen = gateway
[[[utc]]]
type = str
hue_listen = UTC
[[[localtime]]]
type = str
hue_listen = localtime
[[[timezone]]]
type = str
hue_listen = timezone
[[[whitelist]]]
type = dict
hue_listen = whitelist
[[[bridge_swversion]]]
type = str
hue_listen = bridge_swversion
[[[apiversion]]]
type = str
hue_listen = apiversion
[[[swupdate]]]
type = dict
hue_listen = swupdate
[[[linkbutton]]]
type = bool
hue_listen = linkbutton
[[[portalservices]]]
type = bool
hue_listen = portalservices
[[[portalconnection]]]
type = str
hue_listen = portalconnection
[[[portalstate]]]
type = dict
hue_listen = portalstate
[[[power]]]
type = bool
hue_send = on
hue_listen = on
knx_dpt = 1
knx_cache = 8/0/1
[[[reachable]]]
type = bool
hue_listen = reachable
[[[ct]]]
type = num
hue_send = ct
hue_listen = ct
[[[scene]]]
type = str
hue_send = scene
enforce_updates = true
[[[bri]]]
type = num
cache = on
hue_send = bri
hue_listen = bri
hue_transitionTime = 0.2
[[[[dim]]]]
type = list
knx_dpt = 3
knx_listen = 8/0/2
hue_dim_max = 255
hue_dim_step = 10
hue_dim_time = 0.2
[[[sat]]]
type = num
cache = on
hue_send = sat
hue_listen = sat
[[[col_r]]]
type = num
cache = on
hue_send = col_r
[[[col_g]]]
type = num
cache = on
hue_send = col_g
[[[col_b]]]
type = num
cache = on
hue_send = col_b
[[[hue]]]
type = num
cache = on
hue_send = hue
hue_listen = hue
hue_transitionTime = 0.2
[[[[dim]]]]
type = list
knx_dpt = 3
knx_listen = 8/0/12
hue_dim_max = 65535
hue_dim_step = 2000
hue_dim_time = 0.2
[[[effect]]]
type = str
hue_send = effect
hue_listen = effect
[[[alert]]]
type = str
hue_send = alert
hue_listen = alert
[[[modeltype]]]
type = str
hue_listen = type
[[[lampname]]]
type = str
hue_listen = name
[[[modelid]]]
type = str
hue_listen = modelid
[[[swversion]]]
type = str
hue_listen = swversion
Please note that knx_cache is wrong in the old example for [[[dim]]], the right setting is knx_listen
No logic attributes.
Drops the list of stored scenes in the bridge. Parameter the bridge id as string !
sh.hue.get_config(hue_bridge_id)
Authorizes the user configured by hue_user config property. You have to press the link button.
sh.hue.authorizeuser()
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent