nemeus/arduino-nemeus-lib

Nemeus Library for Arduino (Smart IoT Sensor Architecture)

arduino-nemeus-lib

Nemeus Library for Arduino (Smart IoT Sensor Architecture)

Smart IoT Sensor

The Smart IOT sensor is dedicated to prototyping IoT applications using wireless technologies such as SigFox™, LoRa™, Bluetooth™ Low Energy, GPS/GNSS. In order to offer the fastest development time for application’s proof of concept, this product is 100% compatible with the Arduino IDE. The board is made out of an host Atmel ARM Cortex M0+ MCU directly driving on-market, industry certified modules to enable connectivity. Sensors such as BMP280 (temperature/pressure) and ADXL-345 (accelerometer) are directly available on the board to meet user's application, as well as GPIO, including SPI and I2C to cover the widest range of peripherals.

Examples

LoRaWAN_ReadDevPerso

Example for getting the device personnal parameters.

LoRa_01_send_frame_in_ABP

Example sending frame in main loop using LoRaWAN in ABP mode.

LoRa_02_send_frame_OTAA

Example sending frame in main loop using LoRaWAN in OTAA mode.

Radio_01_send_Temp_Press

Example using RF radio to send temperature and pressure get from BMP085 Barometric Pressure & Temp Sensor.

Radio_02_receive_RF_frame

Example using RF radio to receive LoRa frames.

Sigfox_01_send_frame

Example sending frame in main loop using Sigfox.

basic_accel

Example for the accelerometer printing in main loop the current acceleration on 3 axes to the serial.

basic_ble

Displays BLE received characters to the serial monitor, and loopback them. Sends received characters from serial monitor to BLE master.

basic_gps

Example for the GPS printing the coordonates as soon as a fix is found.

basic_pushbutton

Example for the Push Button lighting up the LED when button is pressed.

basic_radio_fsk_cont_tx

Example using RF radio to perform continuous FSK transmit.

basic_rgbled

Blinks quickly every color in loop and print it to the serial monitor.

basic_temp

Prints temperature, pressure and altitude to the serial monitor.

multi_01

Example used to test main features of the arduino board.