nicochigu/openwrt-nanopik2-latest

Nanopik2 Openwrt Firmware

NanopiK2 S905 Openwrt固件【维护中】

固件包	内核版本	固件下载	状态
haiibo_PLUS	stable
haiibo_PLUS	flippy+
haiibo_PLUS	flippy+o
暴躁老哥_高大全	flippy+		手动构建

use ophub/amlogic-s9xxx-openwrt repository OPHUB/openwrt REPO

Kernel use ophub/kernel repository OPHUB/kernel REPO

use haiibo/OpenWrt repository haiibo REPO

use breakings/OpenWrt repository breakings REPO

使用 ophub/amlogic-s9xxx-openwrt 库

使用 haiibo/OpenWrt 库编译的Plus版进行打包

使用 breakings/OpenWrt 库编译的高大全进行打包

恩山无线早期测试

amlogic S905的NanopiK2未在ophub/amlogic-s9xxx-openwrt项目中|armbian已不再为NanopiK2维护

已经从代码中做了部分修改以达到NanopiK2可以正确被引导

---

NanopiK2 固件每周五拉取打包 【此库为Action自动编译上传】

固件分为 stable 和 flippy 和 flippy(+O) 三个内核 自行测试.

指定版本可自行下载安装内核OPHUB/kernel REPO

旧固件链接【天翼云盘】|【Alist】

目前测试较为稳定固件(内核6.0.7)【Github下载】 | 【Onedrives直链】

开发板参数

SoC: Amlogic S905, Quad-core ARM [email protected], DVFS
GPU: Penta-core ARM Mali™-450
RAM: 2GB DDR3
Network Connectivity: 10/100/1000M (RTL8211F)
Wireless：802.11 b/g/n
Bluetooth：4.0 dual mode
Antenna: One onboard porcelain antenna shared by both WiFi and Bluetooth. One individual IPX interface.
IR: Onboard IR receiver
Audio: Via HDMI/Bluetooth
eMMC interface: eMMC socket
I2S: 7-Pin, 2.54mm pitch pin-header
SD: 1 x MicroSD slot
USB Host: 4 x USB 2.0 Host, standard type A
Micro USB: 1 x USB 2.0, OTG, power input and data transmission
HDMI: HDMI 2.0, Type-A. It supports 4K video
GPIO: 40-Pin, 2.54mm pitch pin-header including I2C, ADC, GPIO, UART, PWM, SPDIF and CVBS
Serial debug port: 4-Pin, 2.54mm pitch single-row pin-header
User Key: 1 x power key
LED: 1 x power LED and 1 x status LED
Power Interface: DC jack, MicroUSB
Power Supply: DC 5V/2A
PCB dimension: 56 x 85mm，6-layer, ENIG

更新可使用晶晨宝盒(优先备份)

• 不保证完全无 BUG！

• 不对任何因使用本固件所遭受的任何损失承担责任！

• 如需联系-请致Telegram / Discord-(JackeyTERA#0668)

一些问题

1. Openwrt Docker 使用Bridge桥接模式无法正常访问

或将 Docker => 设置 => DockerMan设置 => 允许访问端口 【设置为eth0】 //因单臂路由器不进行桥接网口时没有brlan这个东西

单臂路由防火墙=>'iptables -t nat -I POSTROUTING -j FULLCONENAT' 或进行VLAN设置