nm17/kicad-lpd_wireless_modules

Wireless transmitter & receiver modules Symbol and Footprint repo for KiCad for 433mhz (also includes eval boards for development use)

kicad-lpd_wireless_modules's Issues

Add new modules

• https://aliexpress.ru/item/32932216351.html
• https://aliexpress.ru/item/32827496282.html https://www.hoperf.com/modules/rf_transceiver/RFM69W.html
• 3 more...

Decide if footprints should strictly follow KLC or not

Make proper Courtyards

https://klc.kicad.org/footprint/f5/f5.3/

A fully enclosed Component courtyard must be drawn on the F.CrtYd layer, with the following parameters:

• Courtyard uses 0.05mm line width
• All courtyard line elements are placed on a 0.01mm grid
• If the component requires a courtyard on the back of the PCB, a corresponding courtyard must be provided on the B.CrtYd layer.
• Where the courtyard depends on the dimensions of the physical part body, clearance is calculated from the nominal part dimensions.

Courtyard clearance should adhere to the following requirements:

• Unless otherwise specified, clearance is 0.25mm
• Components smaller than 0603 should have a clearance of 0.15mm
• Connectors should have a clearance of 0.5mm, in addition to the clearance required for mating of connector
• Canned capacitors should have a clearance of 0.5mm
• Crystals should have a clearance of 0.5mm
• BGA devices should have a clearance of 1.0mm