This project is used to establish a TCP/UDP port mapping from ISP NAT public address to local private address. If all layers of NAT are full cones (NAT-1), any host can access internal services through the mapped public address. In bind mode, all traffic does not go through this program.
git clone --recursive git://github.com/heiher/natmap
cd natmap
make
# statically link
make ENABLE_STATIC=1
# cross compile
make CROSS_PREFIX=${cross-toolchain}/bin/x86_64-unknown-linux-
# android
mkdir natmap
cd natmap
git clone --recursive git://github.com/heiher/natmap jni
ndk-build
Usage:
natmap [options]
Options:
-4 use IPv4
-6 use IPv6
-u UDP mode
-d run as daemon
-i <interface> network interface
-k <interval> seconds between each keep-alive
-s <address> domain name or address to STUN server
-h <address> domain name or address to HTTP server
-e <path> script path for notify mapped address
Bind options:
-b <port> port number for binding
Forward options:
-t <address> domain name or address to forward target
-p <port> port number to forward target
# TCP
natmap -s stun.stunprotocol.org -h example.com -b 80
# UDP
natmap -u -s stun.stunprotocol.org -b 443
In TCP mode, this program will establishs a TCP port mapping in two steps:
- Establish a connection with the HTTP server from the specified bind port and keep-alive.
- Establish a connection with the STUN server from the same port and obtain the public address.
And this program will call the script specified by the argument to inform the public address after the port mapping is established. and the script can update to the DNS record for external access.
Please note that you need to open the firewall to allow access to the bind port.
Goto Network -> Firewall -> Traffic Rules
Add a traffic rule:
- Protocol: TCP/UDP
- Source zone: wan
- Destination zone: Device (input)
- Destination port: [bind port]
- Action: accept
- Others: keep default values
If the port binding fails, because it is already in use. This program will try to find out which local service process takes up the port and enable reuse port remotely. This works in Linux kernel 5.6 and later, and needs to run as root.
# TCP
natmap -s stun.stunprotocol.org -h example.com -b 80 -t 10.0.0.2 -p 80
# UDP
natmap -u -s stun.stunprotocol.org -b 443 -t 10.0.0.2 -p 443
Similar to bind mode, this program will listening on bound port and accepts the incoming connections and forward to target address.
Another way is to use firewall's DNAT to forward, and this way should uses bind mode.
Goto Network -> Firewall -> Port Forwards
Add a port forward rule:
- Protocol: TCP/UDP
- Source zone: wan
- External port: [bind port]
- Destination zone: lan
- Internal IP address: 10.0.0.2
- Internal port: 80
- Others: keep default values
{public-addr} {public-port} {ip4p} {private-port} {protocol}
- argv[0]: Script path
- argv[1]: Public address (IPv4/IPv6)
- argv[2]: Public port
- argv[3]: IP4P
- argv[4]: Bind port (private port)
- argv[5]: Protocol (TCP/UDP)
The IP4P address format uses IPv6 special addresses to encode IPv4 addresses and ports for easy distribution through DNS AAAA records.
2001::{port}:{ipv4-hi16}:{ipv4-lo16}
- hev - https://hev.cc
- mike wang - https://github.com/mikewang000000
- muink - https://github.com/muink
- tianling shen - https://github.com/1715173329
MIT