nondescriptpointer/oe_content

Drupal module that contains the corporate entity types in Drupal.

OpenEuropa Content

This is a Drupal module that contains the European Commission corporate entity types.

The module uses the RDF SKOS module to provide SKOS modelling for the Publications Office taxonomy vocabularies. These are directly made available in the dependent RDF triple store.

All content types are organised into sub-modules. These content types can be set to be translatable by overriding the language.content_setting configuration.

This module provides a sub-module (oe_content_entity) with a set of Corporate content entities to be used. Check out the README of the module.

The module sets the "Content Owner" field value automatically when new content is created. The default "Content Owner" field value can be set in the "Basic site settings" administrative page. This functionality is available only if OpenEuropa Corporate Site Information is enabled.

Table of contents:

• Requirements
• Installation
• Usage
• Development setup
• Contributing
• Versioning

Requirements

This depends on the following software:

• PHP >=7.2
• Virtuoso (or equivalent) triple store which contains the RDF representations of the following Publications Office (OP) vocabularies: Corporate Bodies, Target Audiences, Organisation Types, Resource Types, Eurovoc

Installation

Install the package and its dependencies:

composer require openeuropa/oe_content

It is strongly recommended to use the provisioned Docker image for Virtuoso that contains already the OP vocabularies. To do this, add the image to your docker.compose.yml file:

  sparql:
    image: openeuropa/triple-store-dev
    environment:
    - SPARQL_UPDATE=true
    - DBA_PASSWORD=dba
    ports:
      - "8890:8890"

Otherwise, make sure you have the triple store instance running and have imported those vocabularies.

Next, if you are using the Task Runner to set up your site, add the runner.yml configuration for connecting to the triple store. Under the drupal key:

  sparql:
    host: "sparql"
    port: "8890"

Still in the runner.yml, add the instruction to create the Drupal settings for connecting to the triple store. Under the drupal.settings.databases key:

  sparql_default:
    default:
      prefix: ""
      host: ${drupal.sparql.host}
      port: ${drupal.sparql.port}
      namespace: 'Drupal\Driver\Database\sparql'
      driver: 'sparql'

Then you can proceed with the regular Task Runner commands for setting up the site.

Otherwise, ensure that in your site's setting.php file you have the connection information to your own triple store instance:

$databases["sparql_default"] = array(
  'default' => array(
    'prefix' => '',
    'host' => 'your-triple-store-host',
    'port' => '8890',
    'namespace' => 'Drupal\\Driver\\Database\\sparql',
    'driver' => 'sparql'
  )
);

Usage

OpenEuropa Content

If you want to use OpenEuropa Content, enable the module:

drush en oe_content

Development setup

Requirements

• Virtuoso 7 (Triplestore database)

Initial setup

You can build the test site by running the following steps.

• Install Virtuoso. The easiest way to do this is by using the OpenEuropa Triple store development Docker container which also pre-imports the main Europa vocabularies.

• Install all the composer dependencies:

composer install

• Customize build settings by copying runner.yml.dist to runner.yml and changing relevant values, like your database credentials.

This will also symlink the theme in the proper directory within the test site and perform token substitution in test configuration files such as behat.yml.dist.

• Install test site by running:

./vendor/bin/run drupal:site-install

Your test site will be available at ./build.

Please note: project files and directories are symlinked within the test site by using the OpenEuropa Task Runner's Drupal project symlink command.

If you add a new file or directory in the root of the project, you need to re-run drupal:site-setup in order to make sure they are be correctly symlinked.

If you don't want to re-run a full site setup for that, you can simply run:

$ ./vendor/bin/run drupal:symlink-project

Using Docker Compose

Alternatively, you can build a development site using Docker and Docker Compose with the provided configuration.

Docker provides the necessary services and tools such as a web server and a database server to get the site running, regardless of your local host configuration.

Requirements:

• Docker
• Docker Compose

Configuration

By default, Docker Compose reads two files, a docker-compose.yml and an optional docker-compose.override.yml file. By convention, the docker-compose.yml contains your base configuration and it's provided by default. The override file, as its name implies, can contain configuration overrides for existing services or entirely new services. If a service is defined in both files, Docker Compose merges the configurations.

Find more information on Docker Compose extension mechanism on the official Docker Compose documentation.

Usage

To start, run:

docker-compose up

It's advised to not daemonize docker-compose so you can turn it off (CTRL+C) quickly when you're done working. However, if you'd like to daemonize it, you have to add the flag -d:

docker-compose up -d

Then:

docker-compose exec web composer install
docker-compose exec web ./vendor/bin/run drupal:site-install

Using default configuration, the development site files should be available in the build directory and the development site should be available at: http://127.0.0.1:8080/build.

Running the tests

To run the grumphp checks:

docker-compose exec web ./vendor/bin/grumphp run

To run the phpunit tests:

docker-compose exec web ./vendor/bin/phpunit

To run the behat tests:

docker-compose exec web ./vendor/bin/behat

Step debugging

To enable step debugging from the command line, pass the XDEBUG_SESSION environment variable with any value to the container:

docker-compose exec -e XDEBUG_SESSION=1 web <your command>

Please note that, starting from XDebug 3, a connection error message will be outputted in the console if the variable is set but your client is not listening for debugging connections. The error message will cause false negatives for PHPUnit tests.

To initiate step debugging from the browser, set the correct cookie using a browser extension or a bookmarklet like the ones generated at https://www.jetbrains.com/phpstorm/marklets/.

Working with content

The project ships with the following Task Runner commands to work with content in the RDF store, they require Docker Compose services to be up and running.

Purge all data:

docker-compose exec sparql ./vendor/bin/robo purge

Or, if you can run commands on your host machine:

./vendor/bin/run sparql:purge

Import default data:

docker-compose exec sparql ./vendor/bin/robo import

Or, if you can run commands on your host machine:

./vendor/bin/run sparql:import

Reset all data, i.e. run purge and import:

docker-compose exec sparql ./vendor/bin/robo purge
docker-compose exec sparql ./vendor/bin/robo import

Or, if you can run commands on your host machine:

./vendor/bin/run sparql:reset

Contributing

Please read the full documentation for details on our code of conduct, and the process for submitting pull requests to us.

Versioning

We use SemVer for versioning. For the available versions, see the tags on this repository.