notabene00/homeyconz

deCONZ app for Athom Homey smart home controller

homeyconz's Issues

HomeyCONZ crashes when activating scene created in Phoscon

When i activate a scene that is created in phoscon the HomeyCONZ app crashes.
Deconz ver 2.05.72
Homey ver 3.2.1
HomeyCONZ ver 0.13.4
This problem is not new for me but i havent figured out why it crashed until today.
Could someone confirm this or is it just me having this problem?

Philips Motion Sensor

Hey,

I thought the Philips Motion Sensor was supported? I suddenly disappeared.. 😅

Is this all ready working on Homey?

Hello!

Sorry for spamming you here with creating a bug report but I saw no other way to contact you.

I am using a homey for some time now and it great. Only the current zigbee implementation is so bad, so I ordered a conbee 2 stick and a raspberry pi 4 to run home assistant and connect that to homey using the home assistent app for homey wich I have installed using CLI.

But than I saw you app on github! Will this app communicate directly to the DeCONZ software wich can be installed on the pi without using home assistant? And, is this app already finished and working? Or still work in progress.. I'm really curious!

Best regards,
Marcel

Error: Cannot find module '../../node_modules/nbhttp'

Describe the bug:
I was running an older version of HomeyCONZ and decided to upgrade. Did a git pull and a homey app install. But the app crashed with the following stacktrace.

module.js:550
    throw err;
    ^

Error: Cannot find module '../../node_modules/nbhttp'
    at Function.Module._resolveFilename (module.js:548:15)
    at Function.Module._load (module.js:475:25)
    at Module.require (module.js:597:17)
    at Module.require (/opt/homey-client/system/manager/ManagerApps/bootstrap/sdk/v2/index.js:1:253)
    at require (internal/module.js:11:18)
    at Object.<anonymous> (/drivers/Driver.js:4:18)
    at Module._compile (module.js:653:30)
    at Object.Module._extensions..js (module.js:664:10)
    at Module.load (module.js:566:32)
    at tryModuleLoad (module.js:506:12)

--- INFO: ru.notabene.deconz has been killed ---

I tried installing an older version of HomeyCONZ but got the same issue. Might be related to the new homey CLI.

How to reproduce:

1. Update homey CLI to latest npm install -g homey
2. Pull latest updates from HomeyCONZ
3. Run homey app run

How it should work:
Install without error.

Bitron Wandthermostat mit Relais 902010/32

Device name:
Bitron Wandthermostat mit Relais 902010/32

Device link:
https://manuals.smabit.eu/lde/av2010_32.html

Device modelid:
902010/32

Device capabilities:
Heizen/Kühlen/Aus

State report example:

Just installed deCONZ 0.13.4 on Homey 4.0.0 and App is crashing when started

Describe the bug:
When installed the app crashed directly
not able to start at all

How to reproduce:
Try to restart App
App Shows App had Stopped unexpectedly

Have tried reinstalling but unfortunately it did not help

─────────────── Logging stdout & stderr ───────────────
module.js:550
throw err;
^

Error: Cannot find module '../../node_modules/nbhttp'
at Function.Module._resolveFilename (module.js:548:15)
at Function.Module._load (module.js:475:25)
at Module.require (module.js:597:17)
at Module.require (/opt/homey-client/system/manager/ManagerApps/bootstrap/sdk/v2/index.js:1:253)
at require (internal/module.js:11:18)
at Object. (/drivers/Driver.js:4:18)
at Module._compile (module.js:653:30)
at Object.Module._extensions..js (module.js:664:10)
at Module.load (module.js:566:32)
at tryModuleLoad (module.js:506:12)

--- INFO: ru.notabene.deconz has been killed ---

Thx for your help

Xiaomi motion sensor reset after 5 seconds

Hello,

I have modified all my xiaomi motion (with and without light metering) sensors to get a motion alarm of 5 seconds. Is it possible to implement the possibility to turning the motion alarm off after 5 seconds?

Best regards Jan Willem

groups do not update their status after reboot deconz.

After a reboot of the homeyconz app in homey or rebooting deconz the homeyconz app gives a red triangle at all of the groups.
All of the separate lights and plugs etc keeps working fine without the red triangle.
The groups are updated in their status on or off but with a red triangle and you can't controll the groups anymore.
To get it working again you have to reboot homey and all of the groups are working again.

Smart Switch WXKG11LM Rev 2 and wall switch WXKG03LM not recognized in app.

Love your app it is working great with only a few minor bugs.
Just got 2 new aqara buttons revision 2 and they are not recognized in the homey app.
The version WXKG11LM version 20161128 works and is recognized but the WXKG11LM rev 2 version 20180525 is not recognized.
Also got 4 aqara wireless wall switches WXKG03LM 2018 versions and are not recognized in the app in homey.
The wall switch with 2 buttons (WXKG02LM rev 2 version 20180809) are working great.
Hope there is a way to add Support for these devices.

Trådfri color light

Describe the bug:
When Trådfri color bulbs are present in Deconz and I try to add any light, color or ordinary, via homeyconz it becomes unresponsive and unable to add any light. It will often say that it can’t find any lights and time out, when I kept trying to add them i crashed the app after a few attempts and had to restart it. As soon as colored light was removed from deconz the app works and can add lights again.

innr FL 130 C Ledstrip changing color ramdom

Describe the bug:
when added to homey, you can choose for random color in a flow. this does not seem to work. so adding the light and changing the color and dimming al work fine in the phoscon app as wel in homey deconz. but the random color picker does not seem to work.
How to reproduce:

How it should work:
every time the light comes on the color wil be different.

--->

Screenshots:

Additional context:

Add install instructions to readme

npm i -g athom-cli
athom app install

and so on

Hue color light not able to change color

I have just installed your app on my homey to controle devices on deCONZ. It works really great en i am verry thankfull for this great app.

I heave a little problem and that's that i can not change the color of my hue color bulb's. Only from white to warm white.

Hope you can fix this.

Best regards
Jan Willem Visser

Xiaomi/aqara vibration sensor

Hi,

I hope you can add support for the aqara vibration sensor.

The ID is lumi.vibration.aq1

Website: https://www.aliexpress.com/item/32892903643.html

Here is some more information from developer.athom.com:

"type":string"EndDevice"
"ieeeAddr":string"0x00158d0002a92083"
"nwkAddr":int61572
"manufId":int4151
"epList":[...]2 items
"status":string"offline"
"joinTime":NULL
"name":string"Aqara Vibration Sensor"
"profileId":string"260"
"deviceId":string"10"
"manufacturerName":string"LUMI"
"productId":string"lumi.vibration.aq1"

Trådfri motion sensor

Device name:

Trådfri motion sensor

Device link:

https://www.ikea.com/gb/en/p/tradfri-wireless-motion-sensor-white-70429913/

Device modelid:

TRADFRI motion sensor

Device capabilities:

Motion, binary luminance sensor

State report example:

state:
      { dark: true,
        lastupdated: '2019-07-14T21:08:45',
        presence: false }

Xiaomi/aqara double button switch with batteries

Hi,

I hope you can add support for the dubble switch on batteries from xiaomi.

The ID is lumi.sensor_86sw2Un

Here is a link to the github page of the homey app: https://github.com/TedTolboom/com.xiaomi-mi-zigbee/blob/master/config/drivers/sensor_86sw2Un.json

And here some more info from developer.athom.com:

"type":string"EndDevice"
"ieeeAddr":string"0x00158d000164042f"
"nwkAddr":int34540
"manufId":int4151
"epList":[...]3 items
"status":string"offline"
"joinTime":NULL
"name":string"Schakelaar bed"
"profileId":string"260"
"deviceId":string"24321"
"manufacturerName":string"LUMI"
"productId":string"lumi.sensor_86sw2Un"

BTW, I believe that there are 2 different versions of this switch. A 2016 and a 2018 version. I dont know the difference, but in the homey app there are 2 off them.

Best regards,
Marcel

Change waiting for credentials mechanism

Replace timer with Homey.ManagerSettings.on('set', callback)

[Feature suggestion] Add "Request API key" button in app

Setup:
Intel NUC with hass.io 0.103.5 running on a Proxmox VE (Debian Buster) with the deCONZ hass.io addon (v 5.0) - have connection between the USB-stick (ConBee v1, updated fw) and hass.io.

Problem:
When running "autodiscover" in HomeyCONZ it says "Succesfully discovered gateway" (yes, has activated "Authenticate app" in the Phoscon webinterface) - but it doesn't get a API-key...
It detects the internal ip-adress (172.30.33.0) in HomeyCONZ - I can change it in the HomeyCONZ-app to the ip-adress of my NUC (192.168.1.3) and set the ports as they are in the addon - but then have to manually get the API key using command prompt...

Suggestion:
Adding a button in the app that makes it possible to fill in the IP address and ports and then request an API key via the app (thereby eliminating the need for going via the command promt to get it...)

Xiaomi Aqara button

Hi! Me again..

I hope you can add support for this sensor.. I allready added someone to homey with your addon, but it seems this one is just a different one.. The one that is supported has ID: WXKG11LM, the one I am not able to connect is the WXKG12LM. I think the difference is that the latest one has also a shake sensor in it.

Here is a link: https://www.aliexpress.com/item/32924164840.html

I have no other information. If you need more, please let me know.

Best regards,
Marcel

HomeyConz started crashing

Hard crash every few hours

Feature request - Group support

Please add group support for devices.
This way it would be easier to turn a collection of bulbs (all kitchen etc) on.

https://dresden-elektronik.github.io/deconz-rest-doc/groups/#setstate

After last update no motion detection anymore

Today i have installed the new software but now al my motion sensores (hue and xiaomi) won't detect motion anymore. Also after remove en re-add the sensors to homey.

Homey rolled out Homey+ backups, but not for CLI apps

Hi! In the first place; congratulations with the birth of your kid! Must have been a really rollercoster for you the last couple of months! I hope everything is fine with you and your family.

I have a question.. Homey has rolled out the Homey+ service, wich contains for now Homey backups. This is awesome as all devices and flows are stored in the cloud for when something happend to homey. Everything can be stored back...

Almost... Because only official apps and devices are backed up. Apps that are installed by CLI, like Homeyconz are not backuped. In my case, almost all my devices are connected to Deconz, so the backup function is almost useless for me..

So my request; I hope you want to publish this app officially in the homey appstore.. What are your thoughts about this?

Cheers,
Marcel

Friends of Hue

Hi,

Any chance to get Friends of Hue Switch inside?
https://phoscon.de/de/support#pairing-friends-of-hue-switch

Thanks

Colour picker not working on Ikea Trådfri bulb (E27 CWS opal 600lm LED1624G9)

Describe the bug:

• Changing colour using the colour picker in Homey doesn't change the colour of the light on the bulb.
• Switching the bulb on/off and changing dim-level via Homey works perfect
• Changing colour via deCONZ/Phoscon webinterface works perfect

How it should work:

Additional context:

• HomeyCONZ version as of Dec. 30th 2019
• deCONZ/Phoscon running as addon (v. 5.0) on hass.io (0.103.5) in a Proxmox VM (Debian Buster) on Intel Nuc with a ConBee (fw 2.05.72)

Philips hue motion sensor

Hi!

I hope you can add support for the Philips hue motion sensors.

I have connected 5 of them now directly to the hue bridge, but like to add them to deconz because of the delay when I connect them to the bridge and than to homey.

I have no further information about the sensors. Do you need any other info?

Here is a link: https://www2.meethue.com/en-us/p/hue-motion-sensor/046677473389

There is also an outdoor version wich I consider to buy: https://www2.meethue.com/nl-nl/p/hue-buitensensor/8718699625474

Regards,
Marcel

Philips Iris light doesn't have color

While the other error is fixed by using app runn, the philips iris light still doesnt have color options in homey

this is the information i have:
"18":{"etag":"457ef0f9fbed5cb1d9b335aa3b79f080","hascolor":true,"manufacturername":"Philips","modelid":"LLC010","name":"Philips Hue Iris","state":{"alert":"none","bri":109,"colormode":"xy","effect":"none","hue":9046,"on":true,"reachable":true,"sat":173,"xy":[0.5412,0.4007]},"swversion":"420067D5","type":"Color light","uniqueid":"00:17:88:01:00:11:e2:c7-0b"},

if you need other info please let me know how to get it.

thank you in advance!

Why not put the app in the store?

Describe the bug:
This is a great plus for homey, but I cannot find it in the official store. Is there a particular reason it isn't there?

How to reproduce:
go apps, click on add, search for "homeyConz" or "deconz" or just "conz" -> no app could be found.

INNR SP120

Device name:
INNR SP120

Device link:
http://www.innrlighting.com/nl/service/#faq-290

Device modelid:
SP 120

Device capabilities:
On/off/power/energy

State report example:
"type":

string"Router"

"ieeeAddr":

string"0x00158d0003273daa"

"nwkAddr":

int63239

"manufId":

int4454

"manufName":

string"innr"

"powerSource":

string"Mains (single phase)"

"modelId":

string"SP 120"

"epList":[

...

]

2 items

"status":

string"online"

"joinTime":

int1574989941

"name":

string"Telefoon lader"

"profileId":

string"49246"

"deviceId":

string"16"

"manufacturerName":

string"innr"

"productId":

string"SP 120"

Deconz Scenes

Device name:
Built in Scenes Phoscon / Deconz

Is it possible to sync the scenes ?

So I can say “set lights to ”

[Enhancement] Add power use cards

I'm trying to replace the original app for deConz but i'm missing the energy changed cards
e.g. plugs power has changed, if this AND power if < X THEN etc.

side support for aqara cube

Hi!

I have a request.. Adding support for wich side the aqara cube is on.. I think you've told me that is is a lot of work to add this.. But is it not only adding 6 extra commands? It will be really usefull as it will extend the possibilitys of this device endless.

For now I'm using the cube to the xiaomi/aqara app on homey as this is supported there but offcourse I do prefer using all my devices running your app. I hope you will reconsider this..

Thanks!

Support for IKEA TRÅDFRI remote control

Is it possible to add support for the TRÅDFRI remote control ?

     },
     "ep":1,
     "etag":"15fbe698572d6a2e13aaa6d023200b10",
     "manufacturername":"IKEA of Sweden",
     "mode":3,
     "modelid":"TRADFRI remote control",
     "name":"TRÅDFRI remote control",
     "state":{
        "buttonevent":1002,
        "lastupdated":"2019-11-23T12:40:19"
     },
     "swversion":"1.2.214",
     "type":"ZHASwitch",
     "uniqueid":"00:0d:6f:ff:fe:18:e5:a7-01-1000"
  },
  "11":{
     "config":{
        "battery":100,
        "duration":90,
        "on":true,
        "reachable":true,
        "temperature":null
     },

Adding Lights doesn’t work anymore

hey, i’m trying to add lights the Phillips Playbar and the Philips Bloom light but i get a “Timeout after 3000 seconds” how do i get some info to see whats happening?

Adding light/plug crashes app

When adding a light or plug, the app crashes. In this case I'm trying to add a INNR SP120 plug that has a light and 2 sensor capabilities (sensor ID 3 & 4).

See crashlog:

id: '4',
r: 'sensors',
state:
{ current: 0,
lastupdated: '2019-12-13T11:20:42',
power: 0,
voltage: 235 },
t: 'event',
uniqueid: '00:15:8d:00:03:61:93:20-01-0b04' }
2019-12-13 12:20:58 [log] [deCONZ] Update for unregistered device { e: 'changed',
id: '3',
r: 'sensors',
state: { consumption: 0, lastupdated: '2019-12-13T11:20:58' },
t: 'event',
uniqueid: '00:15:8d:00:03:61:93:20-01-0702' }
/drivers/Driver.js:57
let filteredSensors = Object.entries(sensors).filter(d => d[1].uniqueid.startsWith(mac))
^

TypeError: Cannot convert undefined or null to object
at Function.entries ()
at Object.entries.filter.map (/drivers/Driver.js:57:35)
at Array.map ()
at getSensorsList (/drivers/Driver.js:51:80)
at http.get (/drivers/Driver.js:22:4)
at IncomingMessage.response.on (/node_modules/nbhttp.js:15:4)
at emitNone (events.js:111:20)
at IncomingMessage.emit (events.js:208:7)
at endReadableNT (_stream_readable.js:1064:12)
at _combinedTickCallback (internal/process/next_tick.js:139:11)

--- INFO: ru.notabene.deconz has been killed ---

App version 0.11.5

Philips hue remote dimmer switch

Hi,

I hope you can add support for tephilips hue dimmer switch:

https://www2.meethue.com/nl-nl/p/hue-dimmer-switch/8718696743157

If you need any other information, please let me know.

Best regards,
Marcel