nrfmesh/nrf52_mesh

nRF52 custom RF mesh sensors and dongle firmware using nRF SDK

nrf52_mesh's Issues

did not manage to enable serial and UART LOG

serial is using UART 0
log is using UART 0
activating NRFX UART 1 produces a compiler error with NRFX activations

read params before writing them

make paramw
Mainly to notify if they were matching so no write is required

MySensors

Are you aware of the MySensors project? It seems that you are re-creating it.

Raspberry

Will run on raspberry zero w ?
If not, can i use the raspberry virtual box image with ble ?
I have here a lot of nrf52 modules

nrf_serial_read with DMA example

usage of read always triggers an event after 2 characters,

In some rough tracking I noted that the EasyDMA RX.MAXCNT is configured on the call of the read itself, is that configuration permanent ?
Why do a call to read on init fails

First compile

I hope to make some tests soon. Do you recomenda segger Studio, zephyr platformio ou nrfconnect visual code ?

Design files ... Motion_tag ?

Are they available?

Thanks!

Randy

missing filtering of broadcast and p2p notifications

the user should not get all p2p messages if not directed to the current node

set back CRC usage