A package to identify matched molecular pairs and use them to predict property changes and generate new molecular structures.
mmpdb 3.1 must be installed before use. (Earlier versions of mmpdb could be run in-place, in the top-level directory.) This will also ensure that the SciPy, peewee, and click packages are installed.
To install from PyPI using pip, which comes with Python:
On macOS and other Unix-like systems:
python -m pip install mmpdb
On Windows:
py -m pip install mmpdb
If you are using a virtual environment (eg, with
venv
or
conda
then the installer will place a copy of the relevant files into the
virtual environment's Python package directory, and place the
mmpdb
command-line driver in your path.
If you are not using a virtual environment (and you should be using a
virtual environment) then the installer will place the relevant files
into Python's system directory. If you do not have write permissions
to that directory, or only want to install it for your personal use,
then add the --user
flag at the end of the install command.
To install from source directory, go to the top-level directory then do:
On macOS and other Unix-like systems:
python -m pip install .
On Windows:
py -m pip install .
If you plan to modify the source code and want the installation to use the local directory rather than make a copy into the package directory, then you need an "editable" installation,
On macOS and other Unix-like systems:
python -m pip install -e .
On Windows:
py -m pip install -e .
(Assuming the dependencies are installed then it is possible to use
mmpdb without installation by going to the top-level directory and
using python -m mmpdblib
or, for Windows, py -m mmpdlib
. This is
not recommended.)
The package has been tested on Python 3.9 and 3.10. It should work under newer versions of Python.
You will need a copy of the RDKit cheminformatics toolkit, available from http://rdkit.org/ , which in turn requires NumPy. You will also need SciPy, peewee, and click. The latter three are listed as dependencies in setup.cfg and should be installed automatically.
Optional components you may find useful are:
-
The matched molecular pairs may instead by be stored in a Postgres database. These were tested using the psycopg2 adapter. See
mmpdb help-postgres
for more information. -
The "
--memory
" option in the index command requires the psutil module to get memory use information.
NOTE: mmpdb 2 used a JSON-Lines format for the fragment files, and suggested an optional package with faster JSON parsing. mmpdb 3 no longer uses this format.
The package includes a command-line program named "mmpdb". This support many subcommands. For examples:
-
"
mmpdb fragment
" -- fragment a SMILES file -
"
mmpdb index
" -- find matched molecular pairs in a fragment file
Use the "--help
" option to get more information about any of the
commands. For example, "mmpdb fragment --help
" will print the
command-line arguments, describe how they are used, and show
examples of use.
The subcommands starting with "help-" print additional information about a given topic. Much of the text of this README come from the output of
% mmpdb help-analysis
% mmpdb help-distributed
If you wish to experiment with a simple test set, use
tests/test_data.smi
, with molecular weight and melting point
properties in tests/test_data.csv
.
An open-access publication describing this package has been published in the Journal of Chemical Information and Modeling:
A. Dalke, J. Hert, C. Kramer. mmpdb: An Open-Source Matched Molecular Pair Platform for Large Multiproperty Data Sets. J. Chem. Inf. Model., 2018, 58 (5), pp 902โ910. https://pubs.acs.org/doi/10.1021/acs.jcim.8b00173
For more about the methods to scale mmpdb to larger datasets and generate new molecules, see:
M. Awale, J. Hert, L. Guasch, S. Riniker, C. Kramer. The Playbooks of Medicinal Chemistry Design Moves. J. Chem. Inf. Model., 2021, 61 (2), pp 729-742. https://pubs.acs.org/doi/abs/10.1021/acs.jcim.0c01143
The overall process is:
-
Fragment structures in a SMILES file, to produce fragments.
-
Index the fragments to produces matched molecular pairs. (you might include property information at this point)
-
Load property information.
-
Find transforms for a given structure; and/or
-
Predict a property for a structure given the known property for another structure; and/or
-
Apply 1-cut rules to generate new structures from a given structure.
Some terminology:
A fragmentation cuts 1, 2, or 3 non-ring bonds to convert a structure into a "constant" part and a "variable" part. The substructure in the variable part is a single fragment, and often considered the R-groups, while the constant part contains one fragment for each cut, and it often considered as containing the core.
The matched molecular pair indexing process finds all pairs which have the same constant part, in order to define a transformation from one variable part to another variable part. A "rule" stores information about a transformation, including a list of all the pairs for that rule.
The "rule environment" extends the transformation to include information about the local environment of the attachment points on the constant part. The environment fingerprint is based on the RDKit circular fingerprints for the attachment points, expressed as a canonical SMARTS pattern, and alternatively, as a "pseudo"-SMILES string, which is a bit less precise but easier to understand and visualize.
The fingerprint SMARTS pattern describes the Morgan circular fingerprint invariants around the attachment points. Here's a 2-cut example split across three lines:
[#0;X1;H0;+0;!R:1]-[#6;X4;H1;+0;R](-[#6;X4;H2;+0;R])-[#6;X4;H2;+0;R].
[#0;X1;H0;+0;!R:2]-[#7;X3;H0;+0;R](-[#6;X4;H2;+0;R])-[#6;X4;H2;+0;R].
[#0;X1;H0;+0;!R:3]-[#6;X3;H0;+0;R](:[#6;X3;H1;+0;R]):[#6;X3;H1;+0;R]
The SMARTS modifiers, like "H0" to require no hydrogens, are needed to match the Morgan invariants but are quite the eye-full. The psuedosmiles alternative is:
[*:1]-[CH](-[CH2](~*))-[CH2](~*).
[*:2]-[N](-[CH2](~*))-[CH2](~*).
[*:3]-[c](:[cH](~*)):[cH](~*)
This can be processed by RDKit, if sanitization is disabled, and turned into an image.
CAUTION! The "(~*)
" terms are used to represent the SMARTS connectivity
terms "X", but they do not necessarily all represent distinct atoms!
There is one rule environment for each available radius. Larger radii correspond to more specific environments. The "rule environment statistics" table stores information about the distribution of property changes for all of the pairs which contain the given rule and environment, with one table for each property.
Use "smifrag
" to see how a given SMILES is fragmented. Use "fragment
" to
fragment all of the compounds in a SMILES file.
"mmpdb smifrag
" is a diagnostic tool to help understand how a given SMILES
will be fragmented and to experiment with the different fragmentation options.
For example:
% mmpdb smifrag 'c1ccccc1OC'
|------------- variable -------------| |--------------------- constant --------------------
#cuts | enum.label | #heavies | symm.class | smiles | order | #heavies | symm.class | smiles | with-H
------+------------+----------+------------+--------------+-------+----------+------------+------------------+----------
1 | N | 2 | 1 | [*]OC | 0 | 6 | 1 | [*]c1ccccc1 | c1ccccc1
1 | N | 6 | 1 | [*]c1ccccc1 | 0 | 2 | 1 | [*]OC | CO
2 | N | 1 | 11 | [*]O[*] | 01 | 7 | 12 | [*]C.[*]c1ccccc1 | -
1 | N | 1 | 1 | [*]C | 0 | 7 | 1 | [*]Oc1ccccc1 | Oc1ccccc1
1 | N | 7 | 1 | [*]Oc1ccccc1 | 0 | 1 | 1 | [*]C | C
Use "mmpdb fragment
" to fragment a SMILES file and produce a fragment file
for the MMP analysis. Start with the test data file named "test_data.smi"
containing the following structures:
Oc1ccccc1 phenol
Oc1ccccc1O catechol
Oc1ccccc1N 2-aminophenol
Oc1ccccc1Cl 2-chlorophenol
Nc1ccccc1N o-phenylenediamine
Nc1cc(O)ccc1N amidol
Oc1cc(O)ccc1O hydroxyquinol
Nc1ccccc1 phenylamine
C1CCCC1N cyclopentanol
then run the following command generate a fragment database.
% mmpdb fragment test_data.smi -o test_data.fragdb
Fragmentation can take a while. You can save time by asking the code to reuse fragmentations from a previous run. If you do that then the fragment command will reuse the old fragmentation parameters. (You cannot override them with command-line options.). Here is an example:
% mmpdb fragment data_file.smi -o new_data_file.fragdb \
--cache old_data_file.fragdb
The "--cache
" option will greatly improve the fragment performance when
there are only a few changes from the previous run.
The fragmentation algorithm is configured to ignore structures which are too
big or have too many rotatable bonds. There are also options which change
where to make cuts and the number of cuts to make. Use the "--help
" option
on each command for details.
Use "mmpdb help-smiles-format
" for details about to parse different variants
of the SMILES file format.
The "mmpa index
" command indexes the output fragments from "mmpa fragment
"
by their variable fragments, that is, it finds fragmentations with the same
R-groups and puts them together. Here's an example:
% mmpdb index test_data.fragdb -o test_data.mmpdb
The output from this is a SQLite database.
If you have activity/property data and you do not want the database to include structures where there is no data, then you can specify the properties file as well:
% mmpdb index test_data.fragdb -o test_data.mmpdb --properties test_data.csv
Use "mmpdb help-property-format
" for more details about the property file
format.
For more help use "mmpdb index --help
".
Use "mmpdb loadprops
" to add or modify activity/property data in the
database. Here's an example property file named 'test_data.csv' with molecular
weight and melting point properties:
ID MW MP
phenol 94.1 41
catechol 110.1 105
2-aminophenol 109.1 174
2-chlorophenol 128.6 8
o-phenylenediamine 108.1 102
amidol 124.1 *
hydroxyquinol 126.1 140
phenylamine 93.1 -6
cyclopentanol 86.1 -19
The following loads the property data to the MMPDB database file created in the previous section:
% mmpdb loadprops -p test_data.csv test_data.mmpdb
Using dataset: MMPs from 'test_data.fragdb'
Reading properties from 'tests/test_data.csv'
Read 2 properties for 9 compounds from 'tests/test_data.csv'
Imported 9 'MW' records (9 new, 0 updated).
Imported 8 'MP' records (8 new, 0 updated).
Number of rule statistics added: 533 updated: 0 deleted: 0
Loaded all properties and re-computed all rule statistics.
Use "mmpdb help-property-format
" for more details about the property file
format.
For more help use "mmpdb loadprops --help
". Use "mmpdb list
" to see what
properties are already loaded.
Use "mmpdb transform
" to transform an input structure using the rules in a
database. For each transformation, it can estimate the effect on any
properties. The following looks at possible ways to transform 2-pyridone using
the test dataset created in the previous section, and predict the effect on
the "MW" property (the output is reformatted for clarity):
% mmpdb transform --smiles 'c1cccnc1O' test_data.mmpdb --property MW
ID SMILES MW_from_smiles MW_to_smiles MW_radius
1 Clc1ccccn1 [*:1]O [*:1]Cl 1
2 Nc1ccccn1 [*:1]O [*:1]N 1
3 c1ccncc1 [*:1]O [*:1][H] 1
MW_smarts MW_pseudosmiles MW_rule_environment_id
[#0;X1;H0;+0;!R:1]-[#6;X3;H0;+0;R] [*:1]-[#6](~*)(~*) 299
[#0;X1;H0;+0;!R:1]-[#6;X3;H0;+0;R] [*:1]-[#6](~*)(~*) 276
[#0;X1;H0;+0;!R:1]-[#6;X3;H0;+0;R] [*:1]-[#6](~*)(~*) 268
MW_count MW_avg MW_std MW_kurtosis MW_skewness
1 18.5
3 -1 0 0
4 -16 0 0
MW_min MW_q1 MW_median MW_q3 MW_max MW_paired_t MW_p_value
18.5 18.5 18.5 18.5 18.5
-1 -1 -1 -1 -1 1e+08
-16 -16 -16 -16 -16 1e+08
This says that "c1cccnc1O" can be transformed to "Clc1ccccn1" using the transformation [*:1]O>>[*:1]Cl (that is, replace the oxygen with a chlorine). The best transformation match has a radius of 1, which includes the aromatic carbon at the attachment point but not the aromatic nitrogen which is one atom away.
There is only one pair for this transformation, and it predicts a shift in molecular weight of 18.5. This makes sense as the [OH] is replaced with a [Cl].
On the other hand, there are three pairs which transform it to pyridine. The standard deviation of course is 0 because it's a simple molecular weight calculation. The 1e+08.0 is the mmpdb way of writing "positive infinity".
Melting point is more complicated. The following shows that in the transformation of 2-pyridone to pyridine there are still 3 matched pairs and in this case the average shift is -93C with a standard deviation of 76.727C:
% mmpdb transform --smiles 'c1cccnc1O' test_data.mmpdb --property MP
ID SMILES MP_from_smiles MP_to_smiles MP_radius
1 Clc1ccccn1 [*:1]O [*:1]Cl 1
2 Nc1ccccn1 [*:1]O [*:1]N 1
3 c1ccncc1 [*:1]O [*:1][H] 1
MP_smarts MP_pseudosmiles MP_rule_environment_id
[#0;X1;H0;+0;!R:1]-[#6;X3;H0;+0;R] [*:1]-[#6](~*)(~*) 299
[#0;X1;H0;+0;!R:1]-[#6;X3;H0;+0;R] [*:1]-[#6](~*)(~*) 276
[#0;X1;H0;+0;!R:1]-[#6;X3;H0;+0;R] [*:1]-[#6](~*)(~*) 268
MP_count MP_avg MP_std MP_kurtosis MP_skewness
1 -97
3 -16.667 75.235 -1.5 -0.33764
3 -93 76.727 -1.5 -0.32397
MP_min MP_q1 MP_median MP_q3 MP_max MP_paired_t MP_p_value
-97 -97 -97 -97 -97
-72 -65.75 -47 40 69 0.3837 0.73815
-180 -151 -64 -42.25 -35 -2.0994 0.17062
You might try enabling the "--explain
" option to see why the algorithm
selected a given tranformation.
For more help use "mmpdb transform --help
".
Use "mmpdb predict
" to predict the property change in a transformation from
a given reference structure to a given query structure. Use this when you want
to limit the transform results when you know the starting and ending
structures. The following predicts the effect on molecular weight in
transforming 2-pyridone to pyridone:
% mmpdb predict --smiles 'c1cccnc1' --reference 'c1cccnc1O' \
test_data.mmpdb --property MP
predicted delta: -93 +/- 76.7268
This is the same MP_value and MP_std from the previous section using
'transform
'.
The reference value may also be included in the calulation, to give a predicted value.
% mmpdb predict --smiles 'c1cccnc1' --reference 'c1cccnc1O' \
test_data.mmpdb --property MP --value -41.6
predicted delta: -93 predicted value: -134.6 +/- 76.7268
I'll redo the calculation with the molecular weight property, and have mmpdb do the trival calculation of adding the known weight to the predicted delta:
% mmpdb predict --smiles 'c1cccnc1' --reference 'c1cccnc1O' \
test_data.mmpdb --property MW --value 95.1
predicted delta: -16 predicted value: 79.1 +/- 0
You might try enabling the "--explain
" option to see why the algorithm
selected a given transformation, or use "--save-details
" to save the list
of possible rules to the file pred_detail_rules.txt
and to save the list of
rule pairs to pred_detail_pairs.txt
.
The rules in a MMP database give a sort of "playbook" about the transformations which might be explored in medicinal chemistry. These rule can be applied to a given structure to generate new related structures, following a method related to the transform command but ignoring any property information. Here's an example using the default radius of 0, which means the environment fingerprint is ignored. (The columns have been re-formatted for the documentation.)
% mmpdb generate --smiles 'c1ccccc1C(O)C' test_data.mmpdb
start constant from_smiles to_smiles r pseudosmiles final
CC(O)c1ccccc1 *C(C)c1ccccc1 [*:1]O [*:1][H] 0 [*:1](~*) CCc1ccccc1
CC(O)c1ccccc1 *C(C)c1ccccc1 [*:1]O [*:1]N 0 [*:1](~*) CC(N)c1ccccc1
CC(O)c1ccccc1 *C(C)c1ccccc1 [*:1]O [*:1]Cl 0 [*:1](~*) CC(Cl)c1ccccc1
CC(O)c1ccccc1 *C(C)O [*:1]c1ccccc1 [*:1]c1ccccc1O 0 [*:1](~*) CC(O)c1ccccc1O
CC(O)c1ccccc1 *C(C)O [*:1]c1ccccc1 [*:1]c1ccccc1N 0 [*:1](~*) CC(O)c1ccccc1N
CC(O)c1ccccc1 *C(C)O [*:1]c1ccccc1 [*:1]c1cc(O)ccc1N 0 [*:1](~*) CC(O)c1cc(O)ccc1N
CC(O)c1ccccc1 *C(C)O [*:1]c1ccccc1 [*:1]c1ccc(O)cc1N 0 [*:1](~*) CC(O)c1ccc(O)cc1N
CC(O)c1ccccc1 *C(C)O [*:1]c1ccccc1 [*:1]C1CCCC1 0 [*:1](~*) CC(O)C1CCCC1
CC(O)c1ccccc1 *C(C)O [*:1]c1ccccc1 [*:1]c1ccccc1Cl 0 [*:1](~*) CC(O)c1ccccc1Cl
CC(O)c1ccccc1 *C(C)O [*:1]c1ccccc1 [*:1]c1ccc(N)c(N)c1 0 [*:1](~*) CC(O)c1ccc(N)c(N)c1
CC(O)c1ccccc1 *C(C)O [*:1]c1ccccc1 [*:1]c1cc(O)ccc1O 0 [*:1](~*) CC(O)c1cc(O)ccc1O
CC(O)c1ccccc1 *C(C)O [*:1]c1ccccc1 [*:1]c1ccc(O)c(O)c1 0 [*:1](~*) CC(O)c1ccc(O)c(O)c1
CC(O)c1ccccc1 *C(C)O [*:1]c1ccccc1 [*:1]c1ccc(O)cc1O 0 [*:1](~*) CC(O)c1ccc(O)cc1O
#pairs pair_from_id pair_from_smiles pair_to_id pair_to_smiles
4 2-aminophenol Nc1ccccc1O phenylamine Nc1ccccc1
3 phenol Oc1ccccc1 phenylamine Nc1ccccc1
1 catechol Oc1ccccc1O 2-chlorophenol Oc1ccccc1Cl
2 phenylamine Nc1ccccc1 2-aminophenol Nc1ccccc1O
2 phenylamine Nc1ccccc1 o-phenylenediamine Nc1ccccc1N
1 phenylamine Nc1ccccc1 amidol Nc1ccc(O)cc1N
1 phenylamine Nc1ccccc1 amidol Nc1ccc(O)cc1N
1 phenylamine Nc1ccccc1 cyclopentanol NC1CCCC1
1 phenol Oc1ccccc1 2-chlorophenol Oc1ccccc1Cl
1 phenol Oc1ccccc1 amidol Nc1ccc(O)cc1N
1 phenol Oc1ccccc1 hydroxyquinol Oc1ccc(O)c(O)c1
1 phenol Oc1ccccc1 hydroxyquinol Oc1ccc(O)c(O)c1
1 phenol Oc1ccccc1 hydroxyquinol Oc1ccc(O)c(O)c1
The second half the output shows the number of known pairs for the given rule
environment (use --min-pairs N
to require at least N pairs), and gives a
representative pair from the dataset.
In the above example, all of the fragmentations in the specified --smiles
are used. Alternatively, you may specify --smiles
and one of --constant
or
--query
to use that specific fragmentation, or use --constant
and
--query
(without --smiles
) to specify the exact pair.
There is also an option to generate --subqueries
. This generates all of the
unique 1-cut fragmentations of the query, and uses them as additional queries.
I'll use the --constant
to specify the phynol group, leaving the
aminomethanol available as the query. I'll use --subqueries
to include
fragments of the query. I'll limit the output --columns
to the start and
final SMILES structures, and the number of pairs. I'll use --explain
to
display debug information, and finally, I'll use --no-header
to make the
output a bit less complicated:
% mmpdb generate --smiles 'c1ccccc1C(O)N' --constant '*c1ccccc1' test_data.mmpdb \
--subqueries --columns start,final,#pairs --explain --no-header
Number of subqueries: 4
Subqueries are: ['*CN', '*CO', '*N', '*O']
Using constant SMILES *c1ccccc1 with radius 0.
Environment SMARTS: [#0;X1;H0;+0;!R:1] pseudoSMILES: [*:1](~*)
Number of matching environment rules: 42
Query SMILES [*:1]C(N)O is not a rule_smiles in the database.
Query SMILES [*:1]CN is not a rule_smiles in the database.
Query SMILES [*:1]CO is not a rule_smiles in the database.
Nc1ccccc1 Oc1ccccc1 3
Nc1ccccc1 c1ccccc1 2
Nc1ccccc1 Clc1ccccc1 1
Number of rules for [*:1]N: 3
Oc1ccccc1 c1ccccc1 4
Oc1ccccc1 Nc1ccccc1 3
Oc1ccccc1 Clc1ccccc1 1
Number of rules for [*:1]O: 3
These commands enable MMP generation on a distributed compute cluster, rather than a single machine.
NOTE: This method does not support properties, and you must use the SQLite- based "mmpdb" files, not Postgres databases. The Postgres wiki mentions pgloader as a possible tool to have Postgres load a SQLite database.
These examples assume you work in a queueing environment with a shared file system, and a queueing system which lets you submit a command and a list of filenames, to enqueue the command once for each filename.
This documentation will use the command 'qsub' as a wrapper around GNU Parallel:
alias qsub="parallel --no-notice -j 1 --max-procs 4"
This alias suppresses the request to cite GNU parallel in scientific papers, and has it process one filename at a time, with at most 4 processes in parallel.
I'll pass the filenames to process via stdin, like this example:
% ls /etc/passwd ~/.bashrc | qsub wc
2 5 88 /Users/dalke/.bashrc
120 322 7630 /etc/passwd
This output shows that wc
received only a single filename because with two
filenames it also shows a 'total' line.
% wc /etc/passwd ~/.bashrc
120 322 7630 /etc/passwd
2 5 88 /Users/dalke/.bashrc
122 327 7718 total
NOTE: This method can also be used to process larger data sets on a single
machine because the mmpdb merge
step uses less memory than the mmpdb index
.
The fragment
command supports multi-processing with the -j
flag, which
scales to about 4 or 8 processors. For larger data sets you can break the
SMILES dataset into multiple files, fragment each file indepenently, then
merge the results.
These steps are:
- smi_split - split the SMILES file into smaller files
- fragment - fragment the each smaller SMILES file into its own fragb file.
- fragdb_merge - merge the smaller fragdb files together.
I'll start with a SMILES file containing a header and 20267 SMILES lines:
% head -3 ChEMBL_CYP3A4_hERG.smi
SMILES CMPD_CHEMBLID
[2H]C([2H])([2H])Oc1cc(ncc1C#N)C(O)CN2CCN(C[C@H](O)c3ccc4C(=O)OCc4c3C)CC2 CHEMBL3612928
[2H]C([2H])(N[C@H]1C[S+]([O-])C[C@@H](Cc2cc(F)c(N)c(O[C@H](COC)C(F)(F)F)c2)[C@@H]1O)c3cccc(c3)C(C)(C)C CHEMBL2425617
% wc -l ChEMBL_CYP3A4_hERG.smi
20268 ChEMBL_CYP3A4_hERG.smi
By default the "smi_split" command splits a SMILES file into 10 files. (Use
-n
or --num-files
to change the number of files, or use --num-records
to
have N records per file.)
% mmpdb smi_split ChEMBL_CYP3A4_hERG.smi
Created 10 SMILES files containing 20268 SMILES records.
That "20268 SMILES record" shows that all 20268 lines were used to generate
SMILES records, which is a mistake as it includes the header line. I'll re-do
the command with --has-header
to have it skip the header:
% mmpdb smi_split ChEMBL_CYP3A4_hERG.smi --has-header
Created 10 SMILES files containing 20267 SMILES records.
By default this generates files which look like:
% ls -l ChEMBL_CYP3A4_hERG.*.smi
-rw-r--r-- 1 dalke admin 141307 Feb 10 15:10 ChEMBL_CYP3A4_hERG.0000.smi
-rw-r--r-- 1 dalke admin 152002 Feb 10 15:10 ChEMBL_CYP3A4_hERG.0001.smi
-rw-r--r-- 1 dalke admin 127397 Feb 10 15:10 ChEMBL_CYP3A4_hERG.0002.smi
-rw-r--r-- 1 dalke admin 137930 Feb 10 15:10 ChEMBL_CYP3A4_hERG.0003.smi
-rw-r--r-- 1 dalke admin 130585 Feb 10 15:10 ChEMBL_CYP3A4_hERG.0004.smi
-rw-r--r-- 1 dalke admin 150072 Feb 10 15:10 ChEMBL_CYP3A4_hERG.0005.smi
-rw-r--r-- 1 dalke admin 139620 Feb 10 15:10 ChEMBL_CYP3A4_hERG.0006.smi
-rw-r--r-- 1 dalke admin 133347 Feb 10 15:10 ChEMBL_CYP3A4_hERG.0007.smi
-rw-r--r-- 1 dalke admin 131310 Feb 10 15:10 ChEMBL_CYP3A4_hERG.0008.smi
-rw-r--r-- 1 dalke admin 129344 Feb 10 15:10 ChEMBL_CYP3A4_hERG.0009.smi
The output filenames are determined by the --template
option, which defaults
to {prefix}.{i:04}.smi
, where i
is the output file index. See smi_split --help
for details.
These files can be fragmented in parallel:
% ls ChEMBL_CYP3A4_hERG.*.smi | qsub mmpdb fragment -j 1
I used the -j 1
flag to have mmpdb fragment
use only a single thread,
otherwise each of the four fragment commands will use 4 threads even though my
laptop only has 4 cores. You should adjust the value to match the resources
available on your compute node.
The parallel
command doesn't forward output until the program is done, so it
takes a while to see messages like:
Using 'ChEMBL_CYP3A4_hERG.0002.fragdb' as the default --output file.
Fragmented record 249/2026 (12.3%)[15:04:16] Conflicting single bond
directions around double bond at index 5.
[15:04:16] BondStereo set to STEREONONE and single bond directions set to NONE.
If no -o
/--output
is specified, the fragment
command uses a named based
on the input name, for example, if the input file is
ChEMBL_CYP3A4_hERG.0002.smi
then the default output file is
ChEMBL_CYP3A4_hERG.0002.mmpdb
.
NOTE: This step is only needed if you want to use the merged file as a
--cache
for new fragmentation. The fragdb_constants
and fragdb_partition
commands can work directly on the un-merged fragdb files.
About 28 minutes later I have 10 fragdb files:
% ls -l ChEMBL_CYP3A4_hERG.*.fragdb
-rw-r--r-- 1 dalke admin 17862656 Feb 10 15:17 ChEMBL_CYP3A4_hERG.0000.fragdb
-rw-r--r-- 1 dalke admin 38285312 Feb 10 15:27 ChEMBL_CYP3A4_hERG.0001.fragdb
-rw-r--r-- 1 dalke admin 15024128 Feb 10 15:16 ChEMBL_CYP3A4_hERG.0002.fragdb
-rw-r--r-- 1 dalke admin 15929344 Feb 10 15:16 ChEMBL_CYP3A4_hERG.0003.fragdb
-rw-r--r-- 1 dalke admin 18063360 Feb 10 15:23 ChEMBL_CYP3A4_hERG.0004.fragdb
-rw-r--r-- 1 dalke admin 20586496 Feb 10 15:24 ChEMBL_CYP3A4_hERG.0005.fragdb
-rw-r--r-- 1 dalke admin 24911872 Feb 10 15:26 ChEMBL_CYP3A4_hERG.0006.fragdb
-rw-r--r-- 1 dalke admin 16875520 Feb 10 15:28 ChEMBL_CYP3A4_hERG.0007.fragdb
-rw-r--r-- 1 dalke admin 12451840 Feb 10 15:28 ChEMBL_CYP3A4_hERG.0008.fragdb
-rw-r--r-- 1 dalke admin 11010048 Feb 10 15:29 ChEMBL_CYP3A4_hERG.0009.fragdb
I'll merge these with the fragdb_merge
command:
% mmpdb fragdb_merge ChEMBL_CYP3A4_hERG.*.fragdb -o ChEMBL_CYP3A4_hERG.fragdb
Merge complete. #files: 10 #records: 18759 #error records: 1501
This took about 4 seconds.
The merged file can be used a a cache file for future fragmentations, such as:
% ls ChEMBL_CYP3A4_hERG.*.smi | \
qsub mmpdb fragment --cache ChEMBL_CYP3A4_hERG.fragdb -j 1
This re-build using cache takes about 20 seconds.
The mmpdb index
command is single-threaded. It's possible to parallelize
indexing by partitioning the fragments with the same constant SMILES into
their own fragdb data sets, indexing those files, then merging the results
back into a full MMP database.
Note: the merge command can only be used to merge MMP databases with distinct constants. It cannot be used to merge arbitrary MMP databases.
Note: the MMP database only stores aggregate information about pair properties, and the aggregate values cannot be meaningfully merged, so the merge command will ignore any properties in the database.
The mmpdb fragdb_partition
command splits one or more fragment databases
into N smaller files. All of the fragmentations with the same constant are in
the same file.
NOTE: the fragdb files from the fragment
command have a slightly different
structure than the ones from the partition
command. The fragment fragdb
files only contain the input records that were fragmented. Each partition
fragdb file contains all of the input records from the input fragment
file(s). This is needed to handle 1-cut hydrogen matched molecular pairs.
If you specify multiple fragdb files then by default the results are put into files matching the template "partition.{i:04d}.fragdb", as in the following:
% mmpdb fragdb_partition ChEMBL_CYP3A4_hERG.*.fragdb
Analyzed 'ChEMBL_CYP3A4_hERG.0000.fragdb': #constants: 48895 #fragmentations: 109087
Analyzed 'ChEMBL_CYP3A4_hERG.0001.fragdb': #constants: 70915 #fragmentations: 212777
Analyzed 'ChEMBL_CYP3A4_hERG.0002.fragdb': #constants: 52370 #fragmentations: 100594
Analyzed 'ChEMBL_CYP3A4_hERG.0003.fragdb': #constants: 49021 #fragmentations: 103350
Analyzed 'ChEMBL_CYP3A4_hERG.0004.fragdb': #constants: 52318 #fragmentations: 112930
Analyzed 'ChEMBL_CYP3A4_hERG.0005.fragdb': #constants: 55977 #fragmentations: 123463
Analyzed 'ChEMBL_CYP3A4_hERG.0006.fragdb': #constants: 64083 #fragmentations: 164259
Analyzed 'ChEMBL_CYP3A4_hERG.0007.fragdb': #constants: 51605 #fragmentations: 114113
Analyzed 'ChEMBL_CYP3A4_hERG.0008.fragdb': #constants: 44149 #fragmentations: 80613
Analyzed 'ChEMBL_CYP3A4_hERG.0009.fragdb': #constants: 35889 #fragmentations: 69029
Analyzed 10 databases. Found #constants: 467865 #fragmentations: 1190215
Exporting 1 constants to 'partition.0000.fragdb' (#1/10, weight: 334589647)
Exporting 1 constants to 'partition.0001.fragdb' (#2/10, weight: 270409141)
Exporting 1 constants to 'partition.0002.fragdb' (#3/10, weight: 225664391)
Exporting 1 constants to 'partition.0003.fragdb' (#4/10, weight: 117895691)
Exporting 77977 constants to 'partition.0004.fragdb' (#5/10, weight: 52836587)
Exporting 77978 constants to 'partition.0005.fragdb' (#6/10, weight: 52836587)
Exporting 77975 constants to 'partition.0006.fragdb' (#7/10, weight: 52836586)
Exporting 77976 constants to 'partition.0007.fragdb' (#8/10, weight: 52836586)
Exporting 77977 constants to 'partition.0008.fragdb' (#9/10, weight: 52836586)
Exporting 77978 constants to 'partition.0009.fragdb' (#10/10, weight: 52836586)
The command's --template
option lets you specify how to generate the output
filenames.
Why are there so few constants in first files and so many in the other? And what are the "weight"s?
I'll use the fragdb_constants
command to show the distinct constants in each
file and the number of occurrences.
% mmpdb fragdb_constants partition.0000.fragdb
constant N
*C 25869
That's a lot of methyls (25,869 to be precise).
The indexing command does N*(N-1)/2
indexing comparisions, plus a 1-cut
hydrogen match, so the cost estimate for the methyls is 25869*(25869-1)/2+1 = 334589647
, which is the weight
value listed above.
I'll next list the three most common and least constants in ChEMBL_CYP3A4_hERG.0004.fragdb:
% mmpdb fragdb_constants partition.0004.fragdb --limit 3
constant N
*C.*C.*OC 7076
*C.*Cl 4388
*C.*C.*CC 3261
% mmpdb fragdb_constants partition.0004.fragdb | tail -3
*n1nnnc1SCC(=O)Nc1nc(-c2ccc(Cl)cc2)cs1 1
*n1nnnc1SCc1nc(N)nc(N2CCOCC2)n1 1
*n1s/c(=N/C)nc1-c1ccccc1 1
The values of N are much smaller, so the corresponding weight is significantly smaller.
By default the partition command tries to split the constants evenly (by
weight) across -n
/ --num-files
files, defaulting to 10, which combined
with the quadratic weighting is why the first few files have only a single,
very common, constant, and why all of the "1" counts are used to fill space in
the remaining files
You can alternatively use --max-weight
to set an upper bound for the weights
in each file. In this example I'll use the merged fragdb file from the
previous step:
% mmpdb fragdb_partition ChEMBL_CYP3A4_hERG.fragdb --max-weight 50000000
Analyzed 'ChEMBL_CYP3A4_hERG.fragdb': #constants: 467865 #fragmentations: 1190215
Exporting 1 constants to 'ChEMBL_CYP3A4_hERG-partition.0000.fragdb' (#1/11, weight: 334589647)
Exporting 1 constants to 'ChEMBL_CYP3A4_hERG-partition.0001.fragdb' (#2/11, weight: 270409141)
Exporting 1 constants to 'ChEMBL_CYP3A4_hERG-partition.0002.fragdb' (#3/11, weight: 225664391)
Exporting 1 constants to 'ChEMBL_CYP3A4_hERG-partition.0003.fragdb' (#4/11, weight: 117895691)
Exporting 10 constants to 'ChEMBL_CYP3A4_hERG-partition.0004.fragdb' (#5/11, weight: 49918518)
Exporting 11 constants to 'ChEMBL_CYP3A4_hERG-partition.0005.fragdb' (#6/11, weight: 49916276)
Exporting 13 constants to 'ChEMBL_CYP3A4_hERG-partition.0006.fragdb' (#7/11, weight: 49899719)
Exporting 7 constants to 'ChEMBL_CYP3A4_hERG-partition.0007.fragdb' (#8/11, weight: 49896681)
Exporting 43 constants to 'ChEMBL_CYP3A4_hERG-partition.0008.fragdb' (#9/11, weight: 49893145)
Exporting 9 constants to 'ChEMBL_CYP3A4_hERG-partition.0009.fragdb' (#10/11, weight: 49879752)
Exporting 467768 constants to 'ChEMBL_CYP3A4_hERG-partition.0010.fragdb' (#11/11, weight: 17615427)
If you specify a single fragdb filename then the default output template is "{prefix}-partition.{i:04}.fragdb" where "{prefix}" is the part of the fragdb filename before its extension. The idea is to help organize those files together.
Odds are, you don't want to index the most common fragments. The next two sections help limits which constants are used.
As you saw, the mmpdb fragdb_constants
command can be used to list the
constants. It can also be used to list a subset of the constants.
The count for each constant quickly decreases to something a bit more manageable.
% mmpdb fragdb_constants ChEMBL_CYP3A4_hERG.*.fragdb --limit 20
constant N
*C 25869
*C.*C 23256
*C.*C.*C 21245
*C.*C.*O 15356
*C.*O 8125
*C.*C.*OC 7076
*C.*OC 6878
*F 6201
*C.*F 6198
*C.*c1ccccc1 5124
*C.*O.*O 5117
*c1ccccc1 5073
*OC 4944
*Cl 4436
*C.*Cl 4388
*O 4300
*F.*F 4281
*C.*F.*F 3935
*C.*C.*F 3656
*F.*F.*F 3496
I'll select those constants which occur only 2,000 matches or fewer, and limit the output to the first 5.
% mmpdb fragdb_constants ChEMBL_CYP3A4_hERG.*.fragdb --max-count 2000 --limit 5
constant N
*C.*CC.*O 1954
*C.*C(F)(F)F 1915
*C.*C.*OC(C)=O 1895
*C(F)(F)F 1892
*Cl.*Cl 1738
or count the number of constants which only occur once (the 1-cut constants
might match with a hydrogen substitution while the others will never match).
I'll use --no-header
so the number of lines of output matches the number of
constants:
% mmpdb fragdb_constants ChEMBL_CYP3A4_hERG.fragdb --max-count 1 --no-header | wc -l
370524
These frequent constants are for small fragments. I'll limit the selection to constants where each part of the constant has at least 5 heavy atoms:
% mmpdb fragdb_constants ChEMBL_CYP3A4_hERG.*.fragdb --min-heavies-per-const-frag 5 --limit 4
constant N
*c1ccccc1 5073
*c1ccccc1.*c1ccccc1 1116
*Cc1ccccc1 1050
*c1ccc(F)cc1 921
I'll also require N
be between 10 and 1000.
% mmpdb fragdb_constants ChEMBL_CYP3A4_hERG.*.fragdb --min-heavies-per-const-frag 5 \
--min-count 10 --max-count 1000 --no-header | wc -l
1940
That's a much more tractable size for this example.
As you saw earlier, the mmpdb fragdb_partition
command by default partitions
on all constants. Alternatively, use the --constants
flag to pass in a list
of constants to use. This can be a file name, or -
to accept constants from
stdin, as in the following three lines:
% mmpdb fragdb_constants ChEMBL_CYP3A4_hERG.*.fragdb --min-heavies-per-const-frag 5 \
--min-count 10 --max-count 1000 | \
mmpdb fragdb_partition ChEMBL_CYP3A4_hERG.*.fragdb --constants -
Exporting 1 constants to 'ChEMBL_CYP3A4_hERG.0000.fragdb' (weight: 423661)
Exporting 1 constants to 'ChEMBL_CYP3A4_hERG.0001.fragdb' (weight: 382376)
Exporting 109 constants to 'ChEMBL_CYP3A4_hERG.0002.fragdb' (weight: 382044)
Exporting 261 constants to 'ChEMBL_CYP3A4_hERG.0003.fragdb' (weight: 382013)
Exporting 261 constants to 'ChEMBL_CYP3A4_hERG.0004.fragdb' (weight: 382013)
Exporting 260 constants to 'ChEMBL_CYP3A4_hERG.0005.fragdb' (weight: 382010)
Exporting 261 constants to 'ChEMBL_CYP3A4_hERG.0006.fragdb' (weight: 382010)
Exporting 262 constants to 'ChEMBL_CYP3A4_hERG.0007.fragdb' (weight: 382010)
Exporting 262 constants to 'ChEMBL_CYP3A4_hERG.0008.fragdb' (weight: 382009)
Exporting 262 constants to 'ChEMBL_CYP3A4_hERG.0009.fragdb' (weight: 382003)
Note: the --constants
parser expects the first line to be a header, which is
why I don't use --no-header
in the fragdb_constants
command.
Alternatively, also use --no-header
in the fragdb_partition
command if the
input does not have a header.
Partioning large data sets may take significant time because the export process is single-threaded.
The fragdb_partition
command can be configured to export only subset of the
partitions using a simple round-robin scheme. If you specify --task-id n
and
--num-tasks N
then the given fragdb_partition will only export partitions
i
such that i % N == n
.
The expected approach is to create a single constants files which will be shared by multiple partition commands.
% mmpdb fragdb_constants ChEMBL_CYP3A4_hERG.*.fragdb --min-heavies-per-const-frag 5 \
--min-count 10 --max-count 1000 -o constants.dat
The following splits the job across two partition commands, with task ids 0 and 1, respectively:
% mmpdb fragdb_partition ChEMBL_CYP3A4_hERG.*.fragdb --constants constants.dat --task-id 0 --num-tasks 2
Exporting 1 constants to 'partition.0000.fragdb' (#1/10, weight: 423661)
Exporting 109 constants to 'partition.0002.fragdb' (#3/10, weight: 382044)
Exporting 261 constants to 'partition.0004.fragdb' (#5/10, weight: 382013)
Exporting 261 constants to 'partition.0006.fragdb' (#7/10, weight: 382010)
Exporting 262 constants to 'partition.0008.fragdb' (#9/10, weight: 382009)
% mmpdb fragdb_partition ChEMBL_CYP3A4_hERG.*.fragdb --constants constants.dat --task-id 1 --num-tasks 2
Exporting 1 constants to 'partition.0001.fragdb' (#2/10, weight: 382376)
Exporting 261 constants to 'partition.0003.fragdb' (#4/10, weight: 382013)
Exporting 260 constants to 'partition.0005.fragdb' (#6/10, weight: 382010)
Exporting 262 constants to 'partition.0007.fragdb' (#8/10, weight: 382010)
Exporting 262 constants to 'partition.0009.fragdb' (#10/10, weight: 382003)
Use the --dry-run
option to get an idea of how many files will be created:
% mmpdb fragdb_partition ChEMBL_CYP3A4_hERG.*.fragdb --constants constants.dat --dry-run
i #constants weight filename
0 10 423661 'partition.0000.fragdb'
1 10 382376 'partition.0001.fragdb'
2 10 382044 'partition.0002.fragdb'
3 10 382013 'partition.0003.fragdb'
4 10 382013 'partition.0004.fragdb'
5 10 382010 'partition.0005.fragdb'
6 10 382010 'partition.0006.fragdb'
7 10 382010 'partition.0007.fragdb'
8 10 382009 'partition.0008.fragdb'
9 10 382003 'partition.0009.fragdb'
The partitioned fragdb files can be indexed in parallel:
% ls partition.*.fragdb | qsub mmpdb index
WARNING: No --output filename specified. Saving to 'partition.0000.mmpdb'.
WARNING: No --output filename specified. Saving to 'partition.0001.mmpdb'.
WARNING: No --output filename specified. Saving to 'partition.0002.mmpdb'.
WARNING: No --output filename specified. Saving to 'partition.0003.mmpdb'.
WARNING: No --output filename specified. Saving to 'partition.0004.mmpdb'.
WARNING: No --output filename specified. Saving to 'partition.0005.mmpdb'.
WARNING: No --output filename specified. Saving to 'partition.0006.mmpdb'.
WARNING: No --output filename specified. Saving to 'partition.0007.mmpdb'.
WARNING: No --output filename specified. Saving to 'partition.0008.mmpdb'.
WARNING: No --output filename specified. Saving to 'partition.0009.mmpdb'.
(If you don't like these warning messages, use the --quiet
flag.)
The last step is to merge the partitioned mmpdb files with the merge
option,
which only works if no two mmpdb files share the same constant:
% mmpdb merge partition.*.mmpdb -o ChEMBL_CYP3A4_hERG_distributed.mmpdb
[Stage 1/7] Merging compound records ...
[Stage 1/7] Merged 4428 compound records in 0.046 seconds.
[Stage 2/7] Merging rule_smiles tables ...
[Stage 2/7] Merged 3159 rule_smiles records in 0.030 seconds.
[Stage 3/7] Merging rule tables ...
[Stage 3/7] Merged 21282 rule records in 0.072 seconds.
[Stage 4/7] Merging environment_fingerprint records ...
[Stage 4/7] Merged 1753 environment_fingerprint records in 0.035 seconds.
[Stage 5/7] Merging rule environment records ...
[Stage 5/7] Merged 143661 rule environment records in 0.47 seconds.
[Stage 6/7] Merging constant_smiles and pair records ...
[Stage 6/7] Merged 893 constant SMILES and 203856 pair records in 0.26 seconds
[Stage 7/7] Indexed and analyzed the merged records in 0.33 seconds.
Merged 10 files in 1.3 seconds.
Let's take a look:
% mmpdb list ChEMBL_CYP3A4_hERG_distributed.mmpdb
Name #cmpds #rules #pairs #envs #stats |-------- Title --------| Properties
ChEMBL_CYP3A4_hERG_distributed.mmpdb 4428 21282 203856 143661 0 Merged MMPs from 10 files <none>
Finally, I'll cross-check this with a normal mmpdb index
. I need to create
the same subset
% mmpdb fragdb_partition ChEMBL_CYP3A4_hERG.fragdb --constants constants.dat \
-n 1 --template ChEMBL_CYP3A4_hERG_subset.fragdb
Exporting 1940 constants to 'ChEMBL_CYP3A4_hERG_subset.fragdb' (#1/1, weight: 3862149)
Then index the subset:
% mmpdb index ChEMBL_CYP3A4_hERG_subset.fragdb
WARNING: No --output filename specified. Saving to 'ChEMBL_CYP3A4_hERG_subset.mmpdb'.
And finally, compare the two:
% mmpdb list ChEMBL_CYP3A4_hERG_subset.mmpdb ChEMBL_CYP3A4_hERG_distributed.mmpdb
Name #cmpds #rules #pairs #envs #stats |----------------- Title ------------------| Properties
ChEMBL_CYP3A4_hERG_subset.mmpdb 4428 21282 203856 143661 0 MMPs from 'ChEMBL_CYP3A4_hERG_subset.fragdb' <none>
ChEMBL_CYP3A4_hERG_distributed.mmpdb 4428 21282 203856 143661 0 Merged MMPs from 10 files <none>
They are the same, except for the title.
The project started as a fork of the matched molecular pair program 'mmpa' written by Jameed Hussain, then at GlaxoSmithKline Research & Development Ltd.. Many thanks to them for contributing the code to the RDKit project under a free software license.
Since then it has gone through two rewrites before the 1.0 release. Major changes to the first version included:
-
performance improvements,
-
support for property prediction
-
environmental fingerprints
That version supported both MySQL and SQLite, and used the third-party "peewee.py" and "playhouse" code to help with for database portability. Many thanks to Charlies Leifer for that software.
The second version dropped MySQL support but added APSW support, which was already available in the peewee/playhouse modules. The major goals in version 2 were:
-
better support for chiral structures
-
canonical variable fragments, so the transforms are canonical on both the left-hand and right-hand sides. (Previously only the entire transform was canonical.)
The project then forked into three branches:
-
The public GitHub branch, with a few improvements by Christian Kramer
-
Andrew Dalke's crowd-funded branch which:
- replaced the Morgan fingerprint-based hashed environment fingerprint with its canonical SMARTS equivalent, and a "pseudo-SMILES" which might be used in depictions
- added Postgres support
- added export methods to tab-separated and database dump formats
- Mahendra Awale's improvements for:
- large-database mmpdb generation by partitioning on fragment constants
- playbook generation
Roche funded Andrew Dalke to merge these three branches, resulting in mmpdb 3.0.
The mmpdb package is copyright 2015-2023 by F. Hoffmann-La Roche Ltd and Andrew Dalke Scientific AB, and distributed under the 3-clause BSD license. See LICENSE for details.
The software derives from software which is copyright 2012-2013 by GlaxoSmithKline Research & Development Ltd., and distributed under the 3-clause BSD license. To the best of our knowledge, mmpdb does not contain any of the mmpa original source code. We thank the authors for releasing this package and include their license in the credits. See LICENSE for details.
The file fileio.py originates from chemfp and is therefore copyright by Andrew Dalke Scientific AB under the MIT license. See LICENSE for details. Modifications to this file are covered under the mmpdb license.