palashmon / learn-node-pm Goto Github PK
View Code? Open in Web Editor NEWLearning to build applications and APIs with @wesbos
Home Page: https://learnnode.com/
Learning to build applications and APIs with @wesbos
Home Page: https://learnnode.com/
Dependency | webpack |
---|---|
Current Version | 3.4.1 |
Type | devDependency |
There might be a bunch of new features, fixes and perf improvements that might help us.
Let us look into these changes and try to get onto the latest version of webpack.
🚨 You need to enable Continuous Integration on all branches of this repository. 🚨
To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because we are using your CI build statuses to figure out when to notify you about breaking changes.
Since we did not receive a CI status on the greenkeeper/initial
branch, we assume that you still need to configure it.
If you have already set up a CI for this repository, you might need to check your configuration. Make sure it will run on all new branches. If you don’t want it to run on every branch, you can whitelist branches starting with greenkeeper/
.
We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.
Once you have installed CI on this repository, you’ll need to re-trigger Greenkeeper’s initial Pull Request. To do this, please delete the greenkeeper/initial
branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organiszation’s settings page, under Installed GitHub Apps.
🚨 You need to enable Continuous Integration on all branches of this repository. 🚨
To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because we are using your CI build statuses to figure out when to notify you about breaking changes.
Since we did not receive a CI status on the greenkeeper/initial
branch, we assume that you still need to configure it.
If you have already set up a CI for this repository, you might need to check your configuration. Make sure it will run on all new branches. If you don’t want it to run on every branch, you can whitelist branches starting with greenkeeper/
.
We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.
Once you have installed CI on this repository, you’ll need to re-trigger Greenkeeper’s initial Pull Request. To do this, please delete the greenkeeper/initial
branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organiszation’s settings page, under Installed GitHub Apps.
This issue lists Renovate updates and detected dependencies. Read the Dependency Dashboard docs to learn more.
These updates are awaiting their schedule. Click on a checkbox to get an update now.
.github/workflows/main.yml
actions/checkout v4
actions/setup-node v4
package.json
axios ^1.6.4
body-parser ^1.18.0
connect-flash ^0.1.1
connect-mongo ^3.0.0
cookie-parser ^1.4.3
dompurify ^2.0.0
dotenv ^8.0.0
es6-promisify ^6.0.0
express ^4.15.2
express-session ^1.15.1
express-validator ^6.0.0
faker ^4.1.0
forever ^4.0.0
glob ^9.0.0
html-to-text ^6.0.0
jimp ^0.22.3
juice ^7.0.0
md5 ^2.2.1
moment ^2.18.1
mongoose ^6.0.4
mongoose-mongodb-errors ^0.0.2
multer ^1.3.0
nodemailer ^6.0.0
passport ^0.7.0
passport-local ^1.0.0
passport-local-mongoose ^6.0.0
pug ^3.0.1
slugs ^0.1.3
uuid ^8.0.0
validator ^13.0.0
snyk ^1.319.1
autoprefixer ^9.0.0
babel-core 7.0.0-bridge.0
babel-loader ^8.0.0
babel-preset-env 2.0.0-beta.2
concurrently ^5.0.0
css-loader ^3.0.0
extract-text-webpack-plugin ^3.0.0
node-sass ^9.0.0
nodemon ^2.0.0
postcss-loader ^3.0.0
sass-loader ^8.0.0
webpack ^3.11.0
webpack-bundle-analyzer >=3.3.2
node >= 7.6.0
To see what happens to your code in Node.js 10, Greenkeeper has created a branch with the following changes:
.travis.yml
package.json
files, so that was left aloneIf you’re interested in upgrading this repo to Node.js 10, you can open a PR with these changes. Please note that this issue is just intended as a friendly reminder and the PR as a possible starting point for getting your code running on Node.js 10.
Greenkeeper has checked the engines
key in any package.json
file, the .nvmrc
file, and the .travis.yml
file, if present.
engines
was only updated if it defined a single version, not a range..nvmrc
was updated to Node.js 10.travis.yml
was only changed if there was a root-level node_js
that didn’t already include Node.js 10, such as node
or lts/*
. In this case, the new version was appended to the list. We didn’t touch job or matrix configurations because these tend to be quite specific and complex, and it’s difficult to infer what the intentions were.For many simpler .travis.yml
configurations, this PR should suffice as-is, but depending on what you’re doing it may require additional work or may not be applicable at all. We’re also aware that you may have good reasons to not update to Node.js 10, which is why this was sent as an issue and not a pull request. Feel free to delete it without comment, I’m a humble robot and won’t feel rejected 🤖
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
Dependency | webpack |
---|---|
Current Version | 2.2.1 |
Type | devDependency |
There might be a bunch of new features, fixes and perf improvements that might help us.
Let us look into these changes and try to get onto the latest version of webpack.
Branch | Build failing 🚨 |
---|---|
Dependency | dompurify |
Current Version | 1.0.2 |
Type | dependency |
This version is covered by your current version range and after updating it in your project the build failed.
dompurify is a direct dependency of this project, and it is very likely causing it to break. If other packages depend on yours, this update is probably also breaking those in turn.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
Update extract-text-webpack-plugin to 3.0.0
# For webpack 3
npm i -D extract-text-webpack-plugin
# For webpack 2
npm i -D [email protected]
# For webpack 1
npm i -D [email protected]
Branch | Build failing 🚨 |
---|---|
Dependency |
[autoprefixer](https://github.com/postcss/autoprefixer)
|
Current Version | 8.6.2 |
Type | devDependency |
This version is covered by your current version range and after updating it in your project the build failed.
autoprefixer is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
grid
option for grid properties in autoprefixer --info
.There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.