Giter Site home page Giter Site logo

media-stack's Introduction

Install media stack

There are two media stacks available.

stack-1 This stack contains Jellyfin, Radarr, Sonarr, Jackett and Transmission.

stack-2 This stack contains Jellyfin, Radarr, Sonarr, Prowlarr, qBitTorrent and VPN.

Any one of them can be deployed using --profile option with docker-compose.

docker network create mynetwork

# Install Jellyfin, Radarr, Sonarr, Jackett and Transmission stack
docker-compose --profile stack-1 up -d

# Or, Install Jellyfin, Radarr, Sonarr, Prowlarr, qBitTorrent and VPN stack
## By default NordVPN is configured. This can be changed to ExpressVPN, SurfShark, OpenVPN or Wireguard VPN by updating docker-compose.yml file. It uses OpenVPN type for all providers.

VPN_SERVICE_PROVIDER=nordvpn OPENVPN_USER=openvpn-username OPENVPN_PASSWORD=openvpn-password SERVER_REGIONS=Switzerland docker-compose --profile stack-2 up -d

docker-compose -f docker-compose-nginx.yml up -d # OPTIONAL to use Nginx as reverse proxy

Configure Transmission / qBittorrent

For qBitTorrent,

  • Open qBitTorrent at http://localhost:5080. Default username:password is admin:adminadmin
  • Go to Tools --> Options --> WebUI --> Change password

For qBiTorrent / Transmission

  • From backend, Run below commands
# docker exec -it transmission bash # Get inside transmission container, OR
docker exec -it qbittorrent bash # Get inside qBittorrent container

mkdir /downloads/movies /downloads/tvshows
chown 1000:1000 /downloads/movies /downloads/tvshows

Add indexer to Jackett

  • Open Jackett UI at http://localhost:9117
  • Add indexer
  • Search for torrent indexer (e.g. the pirates bay, YTS)
  • Add selected

Configure Radarr

  • Open Radarr at http://localhost:7878
  • Settings --> Media Management --> Check mark "Movies deleted from disk are automatically unmonitored in Radarr" under File management section --> Save
  • Settings --> Indexers --> Add --> Add Rarbg indexer --> Add minimum seeder (4) --> Test --> Save
  • Settings --> Indexers --> Add --> Torznab --> Follow steps from Jackett to add indexer
  • Settings --> Download clients --> Transmission --> Add Host (transmission / qbittorrent) and port (9091 / 5080) --> Username and password if added --> Test --> Save Note: If VPN is enabled, then transmission / qbittorrent is reachable on vpn's service name
  • Settings --> General --> Enable advance setting --> Select AUthentication and add username and password

Add a movie

  • Movies --> Search for a movie --> Add Root folder (/downloads) --> Quality profile --> Add movie
  • Go to transmission (http://localhost:9091) and see if movie is getting downloaded.

Configure Jellyfin

  • Open Jellyfin at http://localhost:8096
  • Configure as it asks for first time.
  • Add media library folder and choose /data/movies/

Configure Jackett

  • Add admin password

Configure Prowlarr

  • Open Prowlarr at http://localhost:9696
  • Settings --> General --> Authentications --> Select AUthentication and add username and password
  • Add Indexers, Indexers --> Add Indexer --> Search for indexer --> Choose base URL --> Test and Save
  • Add application, Settings --> Apps --> Add application --> Choose Sonarr or Radarr or any apps to link --> Prowlarr server (http://localhost:9696) --> Radarr server (http://localhost:7878) --> API Key --> Test and Save
  • This will add indexers in respective apps automatically.

Apply SSL in Nginx

  • Open port 80 and 443.
  • Get inside Nginx container and install certbot and certbot-nginx apk add certbot certbot-nginx
  • Add URL in server block. e.g. server_name localhost armdev.navratangupta.in; in /etc/nginx/conf.d/default.conf
  • Run certbot --nginx and provide details asked.

Configure Nginx

  • Get inside Nginx container
  • cd /etc/nginx/conf.d
  • Add proxies as per below for all tools.
  • OR, copy nginx.conf file to /etc/nginx/conf.d/default.conf and make necessary changes

docker cp nginx.conf nginx:/etc/nginx/conf.d/default.conf && docker exec -it nginx nginx -s reload

  • Close ports of other tools in firewall/security groups except port 80 and 443.

Radarr Nginx reverse proxy

  • Settings --> General --> URL Base --> Add base (/radarr)
  • Add below proxy in nginx configuration
location /radarr {
    proxy_pass http://radarr:7878;
    proxy_set_header Host $host;
    proxy_set_header X-Real-IP $remote_addr;
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    proxy_http_version 1.1;
    proxy_set_header Upgrade $http_upgrade;
    proxy_set_header Connection $http_connection;
  }
  • Restart containers.

Sonarr Nginx reverse proxy

  • Settings --> General --> URL Base --> Add base (/sonarr)
  • Add below proxy in nginx configuration
location /radarr {
    proxy_pass http://sonarr:8989;
    proxy_set_header Host $host;
    proxy_set_header X-Real-IP $remote_addr;
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    proxy_http_version 1.1;
    proxy_set_header Upgrade $http_upgrade;
    proxy_set_header Connection $http_connection;
  }

Prowlarr Nginx reverse proxy

  • Settings --> General --> URL Base --> Add base (/prowlarr)
  • Add below proxy in nginx configuration

This may need to change configurations in indexers and base in URL.

location /prowlarr {
    proxy_pass http://prowlarr:9696;
    proxy_set_header Host $host;
    proxy_set_header X-Real-IP $remote_addr;
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    proxy_http_version 1.1;
    proxy_set_header Upgrade $http_upgrade;
    proxy_set_header Connection $http_connection;
  }
  • Restart containers.

Jackett Nginx reverse proxy

  • Get inside jackett container and go to /config/Jackett/
  • Add "BasePathOverride": "/jackett" in ServerConfig.json file.
  • Add below proxy
location /jackett/ {
    proxy_pass         http://jackett:9117;
    proxy_http_version 1.1;
    proxy_set_header   Upgrade $http_upgrade;
    proxy_set_header   Connection keep-alive;
    proxy_cache_bypass $http_upgrade;
    proxy_set_header   X-Forwarded-For $proxy_add_x_forwarded_for;
    proxy_set_header   X-Forwarded-Proto $scheme;
    proxy_set_header   X-Forwarded-Host $http_host;
}
  • Restart containers

Transmission Nginx reverse proxy

  • Add below proxy in Nginx config
location ^~ /transmission {
      
          proxy_set_header X-Real-IP $remote_addr;
          proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
          proxy_set_header Host $http_host;
          proxy_set_header X-NginX-Proxy true;
          proxy_http_version 1.1;
          proxy_set_header Connection "";
          proxy_pass_header X-Transmission-Session-Id;
          add_header   Front-End-Https   on;
      
          location /transmission/rpc {
              proxy_pass http://transmission:9091;
          }
      
          location /transmission/web/ {
              proxy_pass http://transmission:9091;
          }
      
          location /transmission/upload {
              proxy_pass http://transmission:9091;
          }
          
          location /transmission {
              return 301 https://$host/transmission/web;
          }
}

Note: If VPN is enabled, then transmission is reachable on vpn's service name

qBittorrent Nginx proxy

location /qbt/ {
    proxy_pass         http://qbittorrent:5080/;
    proxy_http_version 1.1;

    proxy_set_header   Host               http://qbittorrent:5080;
    proxy_set_header   X-Forwarded-Host   $http_host;
    proxy_set_header   X-Forwarded-For    $remote_addr;
    proxy_cookie_path  /                  "/; Secure";
}

Note: If VPN is enabled, then qbittorrent is reachable on vpn's service name

Jellyfin Nginx proxy

  • Add base URL, Admin Dashboard -> Networking -> Base URL (/jellyfin)
  • Add below config in Ngix config
 location /jellyfin {
        return 302 $scheme://$host/jellyfin/;
    }

    location /jellyfin/ {

        proxy_pass http://jellyfin:8096/jellyfin/;

        proxy_pass_request_headers on;

        proxy_set_header Host $host;

        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-Forwarded-Proto $scheme;
        proxy_set_header X-Forwarded-Host $http_host;

        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection $http_connection;

        # Disable buffering when the nginx proxy gets very resource heavy upon streaming
        proxy_buffering off;
    }
  • Restart containers

media-stack's People

Contributors

navilg avatar robinflikkema avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    ๐Ÿ–– Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. ๐Ÿ“Š๐Ÿ“ˆ๐ŸŽ‰

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google โค๏ธ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.