A getting started guide to self-hosting Plausible Community Edition
Contact:
- For release announcements please go to GitHub releases.
- For a question or advice please go to GitHub discussions.
Install • Upgrade • Configure • Integrate • FAQ
Plausible Community Edition (or CE for short) is designed to be self-hosted through Docker. You don't have to be a Docker expert to launch your own instance, but you should have a basic understanding of the command-line and networking to successfully set it up.
The only thing you need to install Plausible CE is a server with Docker. The server must have a CPU with x86_64 or arm64 architecture and support for SSE 4.2 or equivalent NEON instructions. We recommend using a minimum of 4GB of RAM but the requirements will depend on your site traffic.
We've tested this on Digital Ocean (affiliate link) but any hosting provider works. If your server doesn't come with Docker pre-installed, you can follow their docs to install it.
To make your Plausible CE instance accessible on a (sub)domain, you also need to be able to edit your DNS. Plausible CE isn't currently designed for subfolder installations.
To get started quickly, clone the plausible/community-edition repo. It has everything you need to boot up your own Plausible CE server.
console
$ git clone https://github.com/plausible/community-edition hosting
Cloning into 'community-edition'...
remote: Enumerating objects: 280, done.
remote: Counting objects: 100% (146/146), done.
remote: Compressing objects: 100% (74/74), done.
remote: Total 280 (delta 106), reused 86 (delta 71), pack-reused 134
Receiving objects: 100% (280/280), 69.44 KiB | 7.71 MiB/s, done.
Resolving deltas: 100% (136/136), done.
$ ls hosting
README.md clickhouse/ docker-compose.yml images/ plausible-conf.env reverse-proxy/ upgrade/
In the downloaded directory you'll find two important files:
- docker-compose.yml — installs and orchestrates networking between your Plausible CE server, Postgres database, and Clickhouse database for stats.
- plausible-conf.env — configures the Plausible server itself. Full configuration options are documented below.
Right now the latter looks like this:
BASE_URL=replace-me
SECRET_KEY_BASE=replace-me
TOTP_VAULT_KEY=replace-me
Let's do as it asks and populate these required environment variables with our own values.
First we generate the secret key base and TOTP vault key using OpenSSL:
console
$ openssl rand -base64 48
GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz
$ openssl rand -base64 32
dsxvbn3jxDd16az2QpsX5B8O+llxjQ2SJE2i5Bzx38I=
And then we decide on the base URL where the instance would be accessible:
plausible-conf.env
- BASE_URL=replace-me
+ BASE_URL=http://plausible.example.com
- SECRET_KEY_BASE=replace-me
+ SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz
- TOTP_VAULT_KEY=replace-me
+ TOTP_VAULT_KEY=dsxvbn3jxDd16az2QpsX5B8O+llxjQ2SJE2i5Bzx38I=
We can start our instance now but the requests would be served over HTTP. Not cool! Let's configure Caddy to enable HTTPS.
Tip
For other reverse-proxy setups please see reverse-proxy docs.
Don't need reverse proxy?
If you're opting out of a reverse proxy and HTTPS, you'll need to adjust the Plausible service configuration to ensure it's not limited to localhost (127.0.0.1). This change allows the service to be accessible from any network interface:
plausible:
ports:
- - 127.0.0.1:8000:8000
+ - 8000:8000
First we need to point DNS records for our base URL to the IP address of the instance. This is needed for Caddy to issue the TLS certificates.
Then we need to let Caddy know the domain name for which to issue the TLS certificate and the service to redirect the requests to.
reverse-proxy/docker-compose.caddy-gen.yml
plausible:
labels:
- virtual.host: "example.com" # change to your domain name
+ virtual.host: "plausible.example.com"
virtual.port: "8000"
- virtual.tls-email: "[email protected]" # change to your email
+ virtual.tls-email: "[email protected]"
Finally we need to update the base URL to use HTTPS scheme.
plausible-conf.env
- BASE_URL=http://plausible.example.com
+ BASE_URL=https://plausible.example.com
SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz
TOTP_VAULT_KEY=dsxvbn3jxDd16az2QpsX5B8O+llxjQ2SJE2i5Bzx38I=
Now we can start everything together.
console
$ docker compose -f docker-compose.yml -f reverse-proxy/docker-compose.caddy-gen.yml up -d
[+] Running 19/19
✔ plausible_db 9 layers [⣿⣿⣿⣿⣿⣿⣿] Pulled
✔ plausible_events_db 7 layers [⣿⣿⣿⣿⣿⣿⣿] Pulled
✔ plausible 7 layers [⣿⣿⣿⣿⣿⣿⣿] Pulled
✔ caddy-gen 8 layers [⣿⣿⣿⣿⣿⣿⣿⣿] Pulled
[+] Running 5/5
✔ Network hosting_default Created
✔ Container hosting-plausible_db-1 Started
✔ Container hosting-plausible_events_db-1 Started
✔ Container hosting-plausible-1 Started
✔ Container caddy-gen Started
It takes some time to start PostgreSQL and ClickHouse, create the databases, and run the migrations. After about fifteen seconds you should be able to access your instance at the base URL and see the registration screen for the admin user.
Tip
If something feels off, make sure to check out the logs with docker compose logs and start a GitHub discussion.
🎉 Happy hosting! 🚀
Next we'll go over how to upgrade the instance when a new release comes out, more things to configure, and how to integrate with Google and others!
Each new release contains information on how to upgrade to it from the previous version. This section outlines the general steps and explains the versioning.
Plausible CE follows semantic versioning: MAJOR.MINOR.PATCH
You can find available Plausible versions on Github packages. The default latest
tag refers to the latest stable release tag. You can also pin your version:
- ghcr.io/plausible/community-edition:v2 pins the major version to
2
but allows minor and patch version upgrades - ghcr.io/plausible/community-edition:v2.1 pins the minor version to
2.1
but allows only patch upgrades
None of the functionality is backported to older versions. If you wish to get the latest bug fixes and security updates you need to upgrade to a newer version.
New versions are published on the releases page and their changes are documented in our Changelog. Please note that database schema changes require running migrations when you're upgrading. However, we consider the schema as an internal API and therefore schema changes aren't considered a breaking change.
We recommend to pin the major version instead of using latest
. Either way the general flow for upgrading between minor version would look like this:
console
$ cd hosting # or wherever you cloned this repo
$ docker compose stop plausible
[+] Running 1/1
✔ Container hosting-plausible-1 Stopped
$ docker compose rm plausible
? Going to remove hosting-plausible-1 Yes
[+] Running 1/0
✔ Container hosting-plausible-1 Removed
$ docker compose -f docker-compose.yml -f reverse-proxy/docker-compose.caddy-gen.yml up -d
[+] Running 8/8
✔ plausible 7 layers [⣿⣿⣿⣿⣿⣿⣿] 0B/0B Pulled 6.4s
✔ 96526aa774ef Pull complete 0.4s
✔ 93631fa7258d Pull complete 0.6s
✔ 06afbc05374b Pull complete 1.6s
✔ 7ddeeadcce1e Pull complete 1.2s
✔ 724ddb9b523f Pull complete 2.8s
✔ 32581b0068b9 Pull complete 1.7s
✔ 4f4fb700ef54 Pull complete 2.0s
[+] Running 4/4
✔ Container hosting-plausible_events_db-1 Running 0.0s
✔ Container hosting-plausible_db-1 Running 0.0s
✔ Container hosting-plausible-1 Started 1.2s
✔ Container caddy-gen Running 0.0s
$ docker images --filter=reference='ghcr.io/plausible/community-edition:*'
REPOSITORY TAG IMAGE ID CREATED SIZE
ghcr.io/plausible/community-edition v2.1 63f7c8708294 6 days ago 83.4MB
ghcr.io/plausible/community-edition v2.1.0-rc.0 2b2735265a65 7 months ago 163MB
$ docker rmi 2b2735265a65
Untagged: ghcr.io/plausible/community-edition:v2.1.0-rc.0
...
Tip
You can omit -f docker-compose.yml -f reverse-proxy/docker-compose.caddy-gen.yml if you are not using Caddy.
Changes in major versions would involve performing a data migration (e.g. v2.0.0) or some other extra step.
Plausible is configured with environment variables, by default supplied via plausible-conf.env env_file.
Warning
Note that if you start a container with one set of ENV vars and then update the ENV vars and restart the container, they won't take effect due to the immutable nature of the containers. The container needs to be recreated.
Here's the minimal configuration file we got from the quick start:
plausible-conf.env
BASE_URL=https://plausible.example.com
SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz
TOTP_VAULT_KEY=dsxvbn3jxDd16az2QpsX5B8O+llxjQ2SJE2i5Bzx38I=
And here's a configuration with some extra options provided:
plausible-conf.env
BASE_URL=https://plausible.example.com
SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz
TOTP_VAULT_KEY=dsxvbn3jxDd16az2QpsX5B8O+llxjQ2SJE2i5Bzx38I=
MAXMIND_LICENSE_KEY=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
MAXMIND_EDITION=GeoLite2-City
GOOGLE_CLIENT_ID=140927866833-002gqg48rl4iku76lbkk0qhu0i0m7bia.apps.googleusercontent.com
GOOGLE_CLIENT_SECRET=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
MAILER_NAME=Plausible
MAILER_EMAIL=[email protected]
MAILER_ADAPTER=Bamboo.Mua
SMTP_HOST_ADDR=smtp.gmail.com
SMTP_HOST_PORT=587
SMTP_USER_NAME=[email protected]
SMTP_USER_PWD="wnqj fkbn jcwc byxk"
DISABLE_REGISTRATION=invite_only
Here're the currently supported ENV vars:
Configures the base URL to use in link generation, doesn't have any defaults and needs to be provided in the ENV vars
plausible-conf.env
BASE_URL=https://plausible.example.com
Note
In production systems, this should be your ingress host (CDN or proxy).
Configures the secret used for sessions in the dashboard, doesn't have any defaults and needs to be provided in the ENV vars, can be generated with OpenSSL:
console
$ openssl rand -base64 48
GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz
plausible-conf.env
SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz
Warning
Don't use this exact value or someone would be able to sign a cookie with user_id=1
and log in as the admin!
Configures the secret used for encrypting TOTP secrets at rest using AES256-GCM, doesn't have any defaults and needs to be provided in the ENV vars, can be generated with OpenSSL:
console
$ openssl rand -base64 32
dsxvbn3jxDd16az2QpsX5B8O+llxjQ2SJE2i5Bzx38I=
plausible-conf.env
TOTP_VAULT_KEY=dsxvbn3jxDd16az2QpsX5B8O+llxjQ2SJE2i5Bzx38I=
Default: true
Restricts registration of new users. Possible values are true
(full restriction), false
(no restriction), and invite_only
(only the invited users can register).
Default: false
When enabled, new users need to verify their email addressby following a link delivered to their mailbox. Please configure your server for SMTP to receive this email. You can find Plausible's SMTP configuration options under below.
If something went wrong you can run this command to verify all users in the database:
console
$ cd hosting # or wherever you cloned this repo
$ docker compose exec plausible_db psql -U postgres -h localhost -d plausible_db -c "UPDATE users SET email_verified = true;"
Default: 0.0.0.0
Configures the IP address to bind the listen socket for the web server.
Warning
Note that setting it to 127.0.0.1
in a container would make the web server unavailable from outside the container.
Default: 8000
Configures the port to bind the listen socket for the web server.
Plausible uses PostgreSQL for storing user data and ClickhouseDB for analytics data. Use the following variables to configure them.
Default: postgres://postgres:postgres@plausible_db:5432/plausible_db
Configures the URL for PostgreSQL database.
Default: http://plausible_events_db:8123/plausible_events_db
Configures the URL for ClickHouse database.
Enables Ecto to use IPv6 when connecting to the PostgreSQL database. Not set by default.
plausible-conf.env
ECTO_IPV6=true
Enables Ecto to use IPv6 when connecting to the ClickHouse database. Not set by default.
plausible-conf.env
ECTO_CH_IPV6=true
For step-by-step integration with Google see below.
The Client ID from the Google API Console for your project. Not set by default.
plausible-conf.env
GOOGLE_CLIENT_ID=140927866833-002gqg48rl4iku76lbkk0qhu0i0m7bia.apps.googleusercontent.com
The Client Secret from the Google API Console for your project. Not set by default.
plausible-conf.env
GOOGLE_CLIENT_SECRET=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
Plausible CE uses the country database created by db-ip for enriching analytics data with visitor countries. The database is shipped within the container image and country data collection happens automatically.
Optionally, you can provide a different database. For example, you can use MaxMind services and enable city-level geolocation:
plausible-conf.env
BASE_URL=https://plausible.example.com
SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz
MAXMIND_LICENSE_KEY=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
MAXMIND_EDITION=GeoLite2-City
Default: /app/lib/plausible-0.0.1/priv/geodb/dbip-country.mmdb.gz
This database is used to lookup GeoName IDs for IP addresses. If not set, defaults to the file shipped within the container image.
Default: /app/lib/location-0.1.0/priv/geonames.lite.csv
This file is used to turn GeoName IDs into human readable strings for display on the dashboard. Defaults to the one shipped within the container image.
If set, this ENV variable takes precedence over IP_GEOLOCATION_DB and makes Plausible download (and keep up to date) a free MaxMind GeoLite2 MMDB of the selected edition. See below for integration instructions.
Default: GeoLite2-City
MaxMind database edition to use (only if MAXMIND_LICENSE_KEY is set)
Plausible CE sends transactional emails e.g. account activation, password reset. In addition, it sends non-transactional emails like weekly or monthly reports.
It uses SMTP with an optional relay by default. Alternatively, you can use other services such as Postmark, Mailgun, Mandrill or Send Grid to send emails.
Here's a short guide on using your Gmail account for email delivery.
Default: Bamboo.SMTPAdapter
Instead of the default, you can replace this with Bamboo.PostmarkAdapter, Bamboo.MailgunAdapter, Bamboo.MandrillAdapter or Bamboo.SendGridAdapter and add the appropriate variables.
Having problems with the default SMTP client?
Please try the new SMTP client introduced in v2.1.0 by setting MAILER_ADAPTER to Bamboo.Mua
. All the SMTP_*
environment variables can stay the same.
plausible-conf.env
BASE_URL=https://plausible.example.com
SECRET_KEY_BASE=PkVcxRgQDfQyhPETlog3vvCrj5LdYFSv4ejPEJHJO+i/37w6RZfRjeVCpJayjUjJMfXsNurcv5upPhTRoD3KgQ==
TOTP_VAULT_KEY=aihU7k+GSBKbcVFuX9VEPyUhuwlKEomqA94/SQQ0NR4=
SMTP_HOST_ADDR=smtp.gmail.com
SMTP_HOST_PORT=587
[email protected]
SMTP_USER_PWD="wnqj fkbn jcwc byxk"
+ MAILER_ADAPTER=Bamboo.Mua
Default: [email protected]
The email id to use for as from address of all communications from Plausible.
The display name for the sender (from).
The host address of your SMTP relay.
Default: 25
The port of your SMTP relay.
The username/email in case SMTP auth is required on your SMTP relay.
The password in case SMTP auth is required on your SMTP relay.
Default: false
Configures whether SMTPS (SMTP over SSL) is enabled for SMTP connection, e.g. when you use port 465.
Default: 2
Number of retries to make until mailer gives up.
Enter your Postmark API key.
Note
You also have to set the MAILER_EMAIL variable which needs to be configured in PostmarkApps sender signatures.
Enter your Mailgun API key.
Enter your Mailgun domain.
Default: https://api.mailgun.net/v3
Mailgun makes a difference in the API base URL between sender domains from within the EU and outside. By default, the base URL is set to https://api.mailgun.net/v3. To override this you can pass https://api.eu.mailgun.net/v3 if you are using an EU domain.
Enter your Mandrill API key.
Enter your SendGrid API key.
Integrating with Google either to get search keywords for hits from Google search or for imports from Universal Analytics can be frustrating.
The following screenshot-annotated guide shows how to do it all in an easy way: just follow the Google-colored arrows!
View the guide
Here's the outline of what we'll do:
Go to Google Cloud console, for example, by clicking Go to console on Google Cloud landing page. If Google asks you to register, just do it.
![](./images/0-google-cloud.png)
Once there, select a project that you want to use for Plausible OAuth app.
![](./images/1-project-select.png)
If you don't have a project already, or if you want to isolate Plausible from all your other Google Cloud things, you should create a new project.
Here's how to create a new Google Cloud project
In the Select a project pop-up, click New project
![](./images/1-project-new.png)
Pick a descriptive name. Organizations don't matter.
![](./images/1-project-create.png)
Once the project is created, select it and make sure all the other steps happen within that project. Google is tricky and sometimes switches you to a "default" project.
![](./images/1-project-created.png)
And just like that, you have a new Google Cloud project! Please do make sure it stays selected.
Search for APIs & Services or something like that.
![](./images/2-app-registration-api-and-services-pick.png)
Then in the left sidebar pick OAuth consent screen to begin the OAuth application registration.
![](./images/2-app-registration-pick.png)
Choose External for the application type since the other one requires a Google Workspace and that costs money.
![](./images/2-app-registration-external.png)
On the next screen pick the name for your application and add your contact information.
![](./images/2-app-registration-consent-screen-0.png)
Scroll down -- skipping optional fields -- and type in your domain name and contact information (again).
![](./images/2-app-registration-consent-screen-1.png)
Skip the scopes.
![](./images/2-app-registration-scopes-skip.png)
Pick yourself as the test user, Google might complain about it but it works.
![](./images/2-app-registration-test-users.png)
Click the final Save and continue and you have the OAuth application registered.
Pick Credentials in the sidebar.
![](./images/3-oauth-client-credentials-pick.png)
Click + Create credentials dropdown and select OAuth client ID
![](./images/3-oauth-client-pick.png)
Pick Web application for the application type, type the name for the client, and add the redirect URL.
![](./images/3-oauth-client-create.png)
That redirect URL should be /auth/google/callback
on your Plausible instance's BASE_URL
![](./images/3-oauth-client-created.png)
Copy these to your plausible-conf.env and make sure to recreate the plausible
container since the ENV vars provided on startup get "baked in"
plausible-conf.env
GOOGLE_CLIENT_ID=974728454958-e1vcqqqs6hmoc394663kjrkgfajrifdg.apps.googleusercontent.com
GOOGLE_CLIENT_SECRET=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
console
$ docker compose stop plausible
[+] Running 1/1
⠿ Container hosting-plausible-1 Stopped
$ docker compose rm plausible
? Going to remove hosting-plausible-1 Yes
[+] Running 1/0
⠿ Container hosting-plausible-1 Removed
$ docker compose -f docker-compose.yml -f reverse-proxy/docker-compose.caddy-gen.yml up -d
[+] Running 4/4
✔ Container hosting-plausible_events_db-1 Running 0.0s
✔ Container hosting-plausible_db-1 Running 0.0s
✔ Container hosting-plausible-1 Started 1.2s
✔ Container caddy-gen Running 0.0s
[+] Running 3/3
⠿ Container hosting-plausible_db-1 Healthy 0.5s
⠿ Container hosting-plausible_events_db-1 Healthy 0.5s
⠿ Container hosting-plausible-1 Started
$ docker compose exec plausible sh -c 'echo $GOOGLE_CLIENT_ID'
974728454958-e1vcqqqs6hmoc394663kjrkgfajrifdg.apps.googleusercontent.com
You can omit -f docker-compose.yml -f reverse-proxy/docker-compose.caddy-gen.yml if you are not using Caddy
Did you notice that during OAuth application registratation there was a note about Authorized URLs saying that they need to be verified? Nevermind, we are doing it now.
Start by navigating to Google Search Console page.
Once there, either ensure that you've already verified your domain by checking the properties in the Select property dropdown on the left or pick one of the two ways to verify it. I only have screenshots for the "Domain" type so that's what I'm picking.
![](./images/4-search-console-new.png)
Whichever you pick, just follow the instruction in the pop-up, they are good.
![](./images/4-search-console-verify.png)
Success looks like this.
![](./images/4-search-console-verified.png)
With that, you are ready to integrate Plausible with Google Search and import Universal Analytics data. You can do both, neither, and anything in between.
Go back to Google Cloud, ensure you have the correct project selected, and search for Google Search Console API
![](./images/5-search-console-api-search.png)
Enable it.
![](./images/5-search-console-api-enable.png)
Go to the site settings on your Plausible dashboard.
![](./images/6-plausible-settings-pick.png)
In the settings select Integrations and press Continue with Google
If you see a warning instead, that means you haven't set the GOOGLE_CLIENT_ID and GOOGLE_CLIENT_SECRET environment variables correctly.
![](./images/6-plausible-settings-search-console.png)
Choose the account that you added as the test user.
![](./images/6-choose-google-account.png)
Trust our own application.
![](./images/6-continue.png)
Trust more.
![](./images/6-sign-in-copycat.png)
Allow viewing Search Console data.
![](./images/6-view-search-console-data.png)
Pick the property from Search Console.
![](./images/6-property.png)
And now we should be able to drilldown into Google search terms like on plausible.io
Exporting historical data from Google requires enabling multiple APIs:
![](./images/6-enabled-apis.png)
Gotta Catch ‘Em All!
Go back to Google Cloud, ensure you have the correct project selected, and search for Google Analytics API
![](./images/7-analytics-api-search.png)
Enable it.
![](./images/7-analytics-api-enable.png)
Next search for Google Analytics Reporting API
![](./images/7-analytics-reporting-api-search.png)
And enable it.
![](./images/7-analytics-reporting-api-enable.png)
Now search for Google Analytics Admin API
![](./images/7-analytics-admin-api-search.png)
And also enable it.
![](./images/7-analytics-admin-api-enable.png)
Finally search for Google Analytics Data API
![](./images/7-analytics-data-api-search.png)
And enable it!
![](./images/7-analytics-data-api-enable.png)
Phew!
Go to the site settings on your Plausible dashboard.
![](./images/6-plausible-settings-pick.png)
In the Imports & Exports settings section press on the Google Analytics button.
If you see a warning instead, that means you haven't set the GOOGLE_CLIENT_ID and GOOGLE_CLIENT_SECRET environment variables correctly.
![](./images/6-data-import.png)
Choose the account that you added as the test user.
![](./images/6-choose-google-account.png)
Trust our own application.
![](./images/6-continue.png)
Trust more.
![](./images/6-data-continue.png)
Pick the view to import.
![](./images/6-pick-view.png)
And then follow the Plausible directions.
![](./images/6-import-continue.png)
Confirm everything's in order and start the import.
![](./images/6-import.png)
You'll receive an email once the data is imported.
To use MaxMind you need to create an account here. Once you have your account details, you can add MAXMIND_LICENSE_KEY and MAXMIND_EDITION environmental variables to your plausible-conf.env and the databases would be automatically downloaded and kept up to date. Note that using city-level databases like MaxMind's GeoLite2-City requires ~1GB more RAM.
How do I access Plausible from terminal?
You can start an Interactive Elixir session from within the plausible
container:
console
$ cd hosting # or wherever you cloned this repo
$ docker compose exec plausible bin/plausible remote
iex> Application.get_all_env :plausible
[
{PlausibleWeb.Endpoint,
[
live_view: [signing_salt: "f+bZg/crMtgjZJJY7X6OwIWc3XJR2C5Y"],
pubsub_server: Plausible.PubSub,
render_errors: [
view: PlausibleWeb.ErrorView,
layout: {PlausibleWeb.LayoutView, "base_error.html"},
accepts: ["html", "json"]
]
# etc.
# use ^C^C (ctrl+ctrl) to exit
How do I access ClickHouse from terminal?
You can start a clickhouse client
session from within the plausible_events_db
container:
console
$ cd hosting # or wherever you cloned this repo
$ docker compose exec plausible_events_db clickhouse client --database plausible_events_db
:) show tables
-- ┌─name───────────────────────┐
-- │ events │
-- │ events_v2 │
-- │ imported_browsers │
-- │ imported_devices │
-- │ imported_entry_pages │
-- │ imported_exit_pages │
-- │ imported_locations │
-- │ imported_operating_systems │
-- │ imported_pages │
-- │ imported_sources │
-- │ imported_visitors │
-- │ ingest_counters │
-- │ schema_migrations │
-- │ sessions │
-- │ sessions_v2 │
-- └────────────────────────────┘
:) exit
-- Bye
How do I access PostgreSQL from terminal?
You can start a psql
session from within the plausible_db
container:
console
$ cd hosting # or wherever you cloned this repo
$ docker compose exec plausible_db psql -U postgres -h localhost -d plausible_db
plausible_db=# \d
-- Schema | Name | Type | Owner
-- --------+------------------------------------------------+----------+----------
-- public | api_keys | table | postgres
-- public | api_keys_id_seq | sequence | postgres
-- public | check_stats_emails | table | postgres
-- public | check_stats_emails_id_seq | sequence | postgres
-- public | create_site_emails | table | postgres
-- public | create_site_emails_id_seq | sequence | postgres
-- public | email_activation_codes | table | postgres
-- public | email_activation_codes_id_seq | sequence | postgres
-- public | email_verification_codes | table | postgres
-- public | enterprise_plans | table | postgres
-- public | enterprise_plans_id_seq | sequence | postgres
-- public | feedback_emails | table | postgres
-- public | feedback_emails_id_seq | sequence | postgres
-- public | fun_with_flags_toggles | table | postgres
-- public | fun_with_flags_toggles_id_seq | sequence | postgres
-- public | funnel_steps | table | postgres
-- public | funnel_steps_id_seq | sequence | postgres
-- public | funnels | table | postgres
-- public | funnels_id_seq | sequence | postgres
-- public | goals | table | postgres
-- public | goals_id_seq | sequence | postgres
-- public | google_auth | table | postgres
-- public | google_auth_id_seq | sequence | postgres
-- public | intro_emails | table | postgres
-- public | intro_emails_id_seq | sequence | postgres
-- public | invitations | table | postgres
-- public | invitations_id_seq | sequence | postgres
-- public | monthly_reports | table | postgres
-- public | monthly_reports_id_seq | sequence | postgres
-- public | oban_jobs | table | postgres
-- public | oban_jobs_id_seq | sequence | postgres
-- public | oban_peers | table | postgres
-- public | plugins_api_tokens | table | postgres
-- public | salts | table | postgres
-- public | salts_id_seq | sequence | postgres
-- public | schema_migrations | table | postgres
-- public | sent_accept_traffic_until_notifications | table | postgres
-- public | sent_accept_traffic_until_notifications_id_seq | sequence | postgres
-- public | sent_monthly_reports | table | postgres
-- public | sent_monthly_reports_id_seq | sequence | postgres
-- public | sent_renewal_notifications | table | postgres
-- public | sent_renewal_notifications_id_seq | sequence | postgres
-- public | sent_weekly_reports | table | postgres
-- public | sent_weekly_reports_id_seq | sequence | postgres
-- public | setup_help_emails | table | postgres
-- public | setup_help_emails_id_seq | sequence | postgres
-- public | setup_success_emails | table | postgres
-- public | setup_success_emails_id_seq | sequence | postgres
-- public | shared_links | table | postgres
-- public | shared_links_id_seq | sequence | postgres
-- public | shield_rules_ip | table | postgres
-- public | site_imports | table | postgres
-- public | site_imports_id_seq | sequence | postgres
-- public | site_memberships | table | postgres
-- public | site_memberships_id_seq | sequence | postgres
-- public | site_user_preferences | table | postgres
-- public | site_user_preferences_id_seq | sequence | postgres
-- public | sites | table | postgres
-- public | sites_id_seq | sequence | postgres
-- public | spike_notifications | table | postgres
-- public | spike_notifications_id_seq | sequence | postgres
-- public | subscriptions | table | postgres
-- public | subscriptions_id_seq | sequence | postgres
-- public | totp_recovery_codes | table | postgres
-- public | totp_recovery_codes_id_seq | sequence | postgres
-- public | users | table | postgres
-- public | users_id_seq | sequence | postgres
-- public | weekly_reports | table | postgres
-- public | weekly_reports_id_seq | sequence | postgres
plausible_db=# exit