Comments (13)
pmh47
commented on June 10, 2024
Original report: #2 (comment)
from dirt.
pmh47
commented on June 10, 2024
This is due to the python2.7 & python3.5 pip packages for tensorflow-gpu==1.14 being built with gcc 4.8, and dirt being built with a newer compiler. Apparently there is a binary incompatibility that is not remedied by _GLIBCXX_USE_CXX11_ABI. Conversely, their python3.7 package is built with gcc 5.4, which works fine. Unclear why tensorflow versions <= 1.13 all work fine too (presumably luck), given they also use gcc 4.8.
Related: tensorflow/tensorflow#29951
Proper, general fix is to build the op within a docker container derived from tensorflow/tensorflow:custom-op-gpu; this guarantees compatibility with tensorflow's official pip packages.
from dirt.
francoisruty
commented on June 10, 2024
isn't it simpler to switch to python 3.7?
from dirt.
pmh47
commented on June 10, 2024
Yes, for docker; however the issue does affect non-docker installs too in certain cases, contrary to what I first thought.
For a Dockerfile that uses python 3.7 and Ubuntu 16.04, see this gist, which works with tensorflow 1.13.1 and tensorflow 1.14. However, it's not so nice as (i) forcing python 3.7 limits it to tensorflow 1.13 and newer, and (ii) it uses a root-installed non-system python (from ppa:deadsnakes).
from dirt.
francoisruty
commented on June 10, 2024
So I still have the Dockerfile where I had made the edit you had told me regarding OpenGL.
I also changed python to python3.7, and now I use ubuntu 18.04, I build with this command:
sudo docker build -t dirt --build-arg CUDA_BASE_VERSION=10.0 --build-arg CUDNN_VERSION=7.6.0.64 --build-arg UBUNTU_VERSION=18.04 --build-arg TENSORFLOW_VERSION=1.14.0 .
I get:
Step 20/21 : RUN cd ~ && git clone https://github.com/pmh47/dirt.git && pip3 install dirt/
---> Running in 1bc5bdd40c46
Cloning into 'dirt'...
Processing ./dirt
Requirement already satisfied: numpy in /usr/local/lib/python3.6/dist-packages (from dirt==0.3.0)
Requirement already satisfied: tensorflow-gpu>=1.6 in /usr/local/lib/python3.6/dist-packages (from dirt==0.3.0)
Requirement already satisfied: wrapt>=1.11.1 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: tensorboard<1.15.0,>=1.14.0 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: wheel>=0.26 in /usr/lib/python3/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: keras-applications>=1.0.6 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: six>=1.10.0 in /usr/lib/python3/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: absl-py>=0.7.0 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: tensorflow-estimator<1.15.0rc0,>=1.14.0rc0 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: protobuf>=3.6.1 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: grpcio>=1.8.6 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: astor>=0.6.0 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: google-pasta>=0.1.6 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: termcolor>=1.1.0 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: gast>=0.2.0 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: keras-preprocessing>=1.0.5 in /usr/local/lib/python3.6/dist-packages (from tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: werkzeug>=0.11.15 in /usr/local/lib/python3.6/dist-packages (from tensorboard<1.15.0,>=1.14.0->tensorflow-gpu>=1.6->dirt==0.3.0)
Collecting setuptools>=41.0.0 (from tensorboard<1.15.0,>=1.14.0->tensorflow-gpu>=1.6->dirt==0.3.0)
Downloading https://files.pythonhosted.org/packages/ec/51/f45cea425fd5cb0b0380f5b0f048ebc1da5b417e48d304838c02d6288a1e/setuptools-41.0.1-py2.py3-none-any.whl (575kB)
Requirement already satisfied: markdown>=2.6.8 in /usr/local/lib/python3.6/dist-packages (from tensorboard<1.15.0,>=1.14.0->tensorflow-gpu>=1.6->dirt==0.3.0)
Requirement already satisfied: h5py in /usr/local/lib/python3.6/dist-packages (from keras-applications>=1.0.6->tensorflow-gpu>=1.6->dirt==0.3.0)
Installing collected packages: dirt, setuptools
Running setup.py install for dirt: started
Running setup.py install for dirt: finished with status 'error'
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-rbcxbn31-build/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-0lpnv8lc-record/install-record.txt --single-version-externally-managed --compile:
running install
running build
-- The CXX compiler identification is GNU 7.4.0
-- The CUDA compiler identification is NVIDIA 10.0.130
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Check for working CUDA compiler: /usr/local/cuda/bin/nvcc
-- Check for working CUDA compiler: /usr/local/cuda/bin/nvcc -- works
-- Detecting CUDA compiler ABI info
-- Detecting CUDA compiler ABI info - done
CMake Warning (dev) at /usr/local/share/cmake-3.14/Modules/FindOpenGL.cmake:275 (message):
Policy CMP0072 is not set: FindOpenGL prefers GLVND by default when
available. Run "cmake --help-policy CMP0072" for policy details. Use the
cmake_policy command to set the policy and suppress this warning.
FindOpenGL found both a legacy GL library:
OPENGL_gl_LIBRARY: /usr/lib/x86_64-linux-gnu/libGL.so
and GLVND libraries for OpenGL and GLX:
OPENGL_opengl_LIBRARY: /usr/lib/x86_64-linux-gnu/libOpenGL.so
OPENGL_glx_LIBRARY: /usr/lib/x86_64-linux-gnu/libGLX.so
OpenGL_GL_PREFERENCE has not been set to "GLVND" or "LEGACY", so for
compatibility with CMake 3.10 and below the legacy GL library will be used.
Call Stack (most recent call first):
CMakeLists.txt:5 (find_package)
This warning is for project developers. Use -Wno-dev to suppress it.
-- Found OpenGL: /usr/lib/x86_64-linux-gnu/libOpenGL.so
CMake Error at CMakeLists.txt:26 (message):
cannot find either cuda_launch_config.h or gpu_launch_config.h
-- Configuring incomplete, errors occurred!
See also "/tmp/pip-rbcxbn31-build/build/CMakeFiles/CMakeOutput.log".
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-rbcxbn31-build/setup.py", line 50, in <module>
'Programming Language :: Python :: 3.7',
File "/usr/lib/python3/dist-packages/setuptools/__init__.py", line 129, in setup
return distutils.core.setup(**attrs)
File "/usr/lib/python3.6/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.6/distutils/dist.py", line 955, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.6/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/setuptools/command/install.py", line 61, in run
return orig.install.run(self)
File "/usr/lib/python3.6/distutils/command/install.py", line 589, in run
self.run_command('build')
File "/usr/lib/python3.6/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.6/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/tmp/pip-rbcxbn31-build/setup.py", line 24, in run
build_csrc()
File "/tmp/pip-rbcxbn31-build/setup.py", line 18, in build_csrc
subprocess.check_call(['cmake', os.path.join(base_path, 'csrc')], cwd=build_path)
File "/usr/lib/python3.6/subprocess.py", line 311, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['cmake', '/tmp/pip-rbcxbn31-build/csrc']' returned non-zero exit status 1.
from dirt.
pmh47
commented on June 10, 2024
The dockerfile is cloning from github rather than using COPY from your local version, so beware that local changes to CMakeLists / etc. won't be picked up. That said, the repo version works fine for me using a similar configuration, with the dockerfile I posted in a gist before.
Note that your log references python3.6 -- did the python3.7 install work correctly? Are you perhaps using the system pip3 that points at the system python3.6?
I think maybe the error cannot find either cuda_launch_config.h or gpu_launch_config.h is related to that. You could check if the second does in fact exist under /usr/local/lib/python3.7/dist-packages/tensorflow/include/tensorflow/core/util/
from dirt.
francoisruty
commented on June 10, 2024
you're right, I replaced pip commands with pip3, do you know the right syntax to force pip3 to use python 3.7?
is it pip-3.7 install XXX ?
I googled it but it's not very clear, multiple syntaxes are proposed
from dirt.
pmh47
commented on June 10, 2024
It's python3.7 -m pip install ... assuming python3.7 is what your python3.7 binary is called.
from dirt.
francoisruty
commented on June 10, 2024
I have other issues but indeed it works with your gist so it's OK on my side
from dirt.
zhangxuan1918
commented on June 10, 2024
I have similar error when building docker image
cannot find either cuda_launch_config.h or gpu_launch_config.h
any suggestions?
args:
CUDA_BASE_VERSION: 10.0
UBUNTU_VERSION: 18.04
CUDNN_VERSION: 7.6.1.34
TENSORFLOW_VERSION: 2.0.0b0
all logs
ERROR: Complete output from command /usr/bin/python3.7 -u -c 'import setuptools, tokenize;__file__='"'"'/tmp/pip-req-build-nsa0ngpn/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-549ihdtj --python-tag cp37:
ERROR: running bdist_wheel
running build
-- The CXX compiler identification is GNU 7.4.0
-- The CUDA compiler identification is NVIDIA 10.0.130
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Check for working CUDA compiler: /usr/local/cuda/bin/nvcc
-- Check for working CUDA compiler: /usr/local/cuda/bin/nvcc -- works
-- Detecting CUDA compiler ABI info
-- Detecting CUDA compiler ABI info - done
CMake Warning (dev) at /usr/local/share/cmake-3.14/Modules/FindOpenGL.cmake:275 (message):
Policy CMP0072 is not set: FindOpenGL prefers GLVND by default when
available. Run "cmake --help-policy CMP0072" for policy details. Use the
cmake_policy command to set the policy and suppress this warning.
FindOpenGL found both a legacy GL library:
OPENGL_gl_LIBRARY: /usr/lib/x86_64-linux-gnu/libGL.so
and GLVND libraries for OpenGL and GLX:
OPENGL_opengl_LIBRARY: /usr/lib/x86_64-linux-gnu/libOpenGL.so
OPENGL_glx_LIBRARY: /usr/lib/x86_64-linux-gnu/libGLX.so
OpenGL_GL_PREFERENCE has not been set to "GLVND" or "LEGACY", so for
compatibility with CMake 3.10 and below the legacy GL library will be used.
Call Stack (most recent call first):
CMakeLists.txt:5 (find_package)
This warning is for project developers. Use -Wno-dev to suppress it.
-- Found OpenGL: /usr/lib/x86_64-linux-gnu/libOpenGL.so
CMake Error at CMakeLists.txt:26 (message):
cannot find either cuda_launch_config.h or gpu_launch_config.h
-- Configuring incomplete, errors occurred!
See also "/tmp/pip-req-build-nsa0ngpn/build/CMakeFiles/CMakeOutput.log".
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-req-build-nsa0ngpn/setup.py", line 50, in <module>
'Programming Language :: Python :: 3.7',
File "/usr/lib/python3/dist-packages/setuptools/__init__.py", line 129, in setup
return distutils.core.setup(**attrs)
File "/usr/lib/python3.7/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.7/distutils/dist.py", line 966, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.7/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/wheel/bdist_wheel.py", line 204, in run
self.run_command('build')
File "/usr/lib/python3.7/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.7/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/tmp/pip-req-build-nsa0ngpn/setup.py", line 24, in run
build_csrc()
File "/tmp/pip-req-build-nsa0ngpn/setup.py", line 18, in build_csrc
subprocess.check_call(['cmake', os.path.join(base_path, 'csrc')], cwd=build_path)
File "/usr/lib/python3.7/subprocess.py", line 347, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['cmake', '/tmp/pip-req-build-nsa0ngpn/csrc']' returned non-zero exit status 1.
----------------------------------------
ERROR: Failed building wheel for dirt
Running setup.py clean for dirt
Failed to build dirt
Installing collected packages: dirt
Running setup.py install for dirt: started
Running setup.py install for dirt: finished with status 'error'
ERROR: Complete output from command /usr/bin/python3.7 -u -c 'import setuptools, tokenize;__file__='"'"'/tmp/pip-req-build-nsa0ngpn/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-j8000oqc/install-record.txt --single-version-externally-managed --compile:
ERROR: running install
running build
CMake Warning (dev) at /usr/local/share/cmake-3.14/Modules/FindOpenGL.cmake:275 (message):
Policy CMP0072 is not set: FindOpenGL prefers GLVND by default when
available. Run "cmake --help-policy CMP0072" for policy details. Use the
cmake_policy command to set the policy and suppress this warning.
FindOpenGL found both a legacy GL library:
OPENGL_gl_LIBRARY: /usr/lib/x86_64-linux-gnu/libGL.so
and GLVND libraries for OpenGL and GLX:
OPENGL_opengl_LIBRARY: /usr/lib/x86_64-linux-gnu/libOpenGL.so
OPENGL_glx_LIBRARY: /usr/lib/x86_64-linux-gnu/libGLX.so
OpenGL_GL_PREFERENCE has not been set to "GLVND" or "LEGACY", so for
compatibility with CMake 3.10 and below the legacy GL library will be used.
Call Stack (most recent call first):
CMakeLists.txt:5 (find_package)
This warning is for project developers. Use -Wno-dev to suppress it.
CMake Error at CMakeLists.txt:26 (message):
cannot find either cuda_launch_config.h or gpu_launch_config.h
-- Configuring incomplete, errors occurred!
See also "/tmp/pip-req-build-nsa0ngpn/build/CMakeFiles/CMakeOutput.log".
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-req-build-nsa0ngpn/setup.py", line 50, in <module>
'Programming Language :: Python :: 3.7',
File "/usr/lib/python3/dist-packages/setuptools/__init__.py", line 129, in setup
return distutils.core.setup(**attrs)
File "/usr/lib/python3.7/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.7/distutils/dist.py", line 966, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.7/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/setuptools/command/install.py", line 61, in run
return orig.install.run(self)
File "/usr/lib/python3.7/distutils/command/install.py", line 589, in run
self.run_command('build')
File "/usr/lib/python3.7/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.7/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/tmp/pip-req-build-nsa0ngpn/setup.py", line 24, in run
build_csrc()
File "/tmp/pip-req-build-nsa0ngpn/setup.py", line 18, in build_csrc
subprocess.check_call(['cmake', os.path.join(base_path, 'csrc')], cwd=build_path)
File "/usr/lib/python3.7/subprocess.py", line 347, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['cmake', '/tmp/pip-req-build-nsa0ngpn/csrc']' returned non-zero exit status 1.
----------------------------------------
ERROR: Command "/usr/bin/python3.7 -u -c 'import setuptools, tokenize;__file__='"'"'/tmp/pip-req-build-nsa0ngpn/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-j8000oqc/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-req-build-nsa0ngpn/
from dirt.
zhangxuan1918
commented on June 10, 2024
use TENSORFLOW_VERSION=2.0.0-beta1 and python2.7 resolve the issue. However the test is broken
Traceback (most recent call last):
File "/root/dirt/tests/square_test.py", line 54, in <module>
main()
File "/root/dirt/tests/square_test.py", line 41, in main
session = tf.Session()
AttributeError: 'module' object has no attribute 'Session'
from dirt.
pmh47
commented on June 10, 2024
Yes, their 2.0.0b0 release has a bug -- libtensorflow_framework is named wrongly.
I don't officially support 2.0 yet, which is why square_test.py fails. If you want to run the it, patch it within the container (delete lines 41-42 and change .eval() to .numpy() on lines 44-45).
I think it failed under python3 because your python3 tensorflow was installed to the wrong location. If you use this version of the dockerfile it should work as-is. If you want Ubuntu 18.04 rather than 16.04, just change line 4 accordingly, and add python3-distutils to the apt install on line 22.
from dirt.
tpatten
commented on June 10, 2024
I have the same error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3.5 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-h9gn0ti5/setup.py'"'"'; __file__='"'"'/tmp/pip-req-build-h9gn0ti5/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-y6jeexy4
cwd: /tmp/pip-req-build-h9gn0ti5/
Complete output (46 lines):
/usr/lib/python3.5/distutils/dist.py:261: UserWarning: Unknown distribution option: 'python_requires'
warnings.warn(msg)
running bdist_wheel
running build
-- The CXX compiler identification is GNU 5.4.0
-- The CUDA compiler identification is NVIDIA 9.0.176
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Check for working CUDA compiler: /usr/local/cuda/bin/nvcc
-- Check for working CUDA compiler: /usr/local/cuda/bin/nvcc -- works
-- Detecting CUDA compiler ABI info
-- Detecting CUDA compiler ABI info - done
-- Found OpenGL: /usr/local/lib/x86_64-linux-gnu/libOpenGL.so found components: OpenGL EGL
CMake Error at CMakeLists.txt:26 (message):
cannot find either cuda_launch_config.h or gpu_launch_config.h
-- Configuring incomplete, errors occurred!
See also "/tmp/pip-req-build-h9gn0ti5/build/CMakeFiles/CMakeOutput.log".
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-req-build-h9gn0ti5/setup.py", line 50, in <module>
'Programming Language :: Python :: 3.7',
File "/usr/lib/python3.5/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.5/distutils/dist.py", line 955, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/wheel/bdist_wheel.py", line 179, in run
self.run_command('build')
File "/usr/lib/python3.5/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/tmp/pip-req-build-h9gn0ti5/setup.py", line 24, in run
build_csrc()
File "/tmp/pip-req-build-h9gn0ti5/setup.py", line 18, in build_csrc
subprocess.check_call(['cmake', os.path.join(base_path, 'csrc')], cwd=build_path)
File "/usr/lib/python3.5/subprocess.py", line 581, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['cmake', '/tmp/pip-req-build-h9gn0ti5/csrc']' returned non-zero exit status 1
----------------------------------------
ERROR: Failed building wheel for dirt
Running setup.py clean for dirt
Failed to build dirt
Installing collected packages: dirt
Running setup.py install for dirt ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3.5 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-h9gn0ti5/setup.py'"'"'; __file__='"'"'/tmp/pip-req-build-h9gn0ti5/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-gpb031_1/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.5/dirt
cwd: /tmp/pip-req-build-h9gn0ti5/
Complete output (35 lines):
/usr/lib/python3.5/distutils/dist.py:261: UserWarning: Unknown distribution option: 'python_requires'
warnings.warn(msg)
running install
running build
CMake Error at CMakeLists.txt:26 (message):
cannot find either cuda_launch_config.h or gpu_launch_config.h
-- Configuring incomplete, errors occurred!
See also "/tmp/pip-req-build-h9gn0ti5/build/CMakeFiles/CMakeOutput.log".
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-req-build-h9gn0ti5/setup.py", line 50, in <module>
'Programming Language :: Python :: 3.7',
File "/usr/lib/python3.5/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.5/distutils/dist.py", line 955, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/setuptools/command/install.py", line 61, in run
return orig.install.run(self)
File "/usr/lib/python3.5/distutils/command/install.py", line 583, in run
self.run_command('build')
File "/usr/lib/python3.5/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/tmp/pip-req-build-h9gn0ti5/setup.py", line 24, in run
build_csrc()
File "/tmp/pip-req-build-h9gn0ti5/setup.py", line 18, in build_csrc
subprocess.check_call(['cmake', os.path.join(base_path, 'csrc')], cwd=build_path)
File "/usr/lib/python3.5/subprocess.py", line 581, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['cmake', '/tmp/pip-req-build-h9gn0ti5/csrc']' returned non-zero exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /usr/bin/python3.5 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-h9gn0ti5/setup.py'"'"'; __file__='"'"'/tmp/pip-req-build-h9gn0ti5/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-gpb031_1/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.5/dirt Check the logs for full command output.
The culprit if the error cuda_launch_config.h or gpu_launch_config.h.
I am running this in a docker container with
CUDA_BASE_VERSION=9.0
UBUNTU_VERSION=16.04
CUDNN_VERSION=7.6.0.64
TENSORFLOW_VERSION=1.12.0
PYTHON=3.5
Also tried with tensorflow 1.14 and python 3.7, but same error.
Any advice?
from dirt.
Related Issues (20)
- failed to load librasterise.so, 'NoneType' object has no attribute 'rasterise' HOT 2
- How to run it on Win10 HOT 1
- librasterise.so: undefined symbol: cuCtxSetCurrent HOT 1
- NotFoundError: ../dirt/dirt/librasterise.so: undefined symbol: _ZN10tensorflow7s... HOT 1
- Differentiability wrt vertex colors HOT 3
- glsl SDF
- Setup error using colab
- yet another none of 2 egl devices matches the active cuda device HOT 3
- undefined symbol: eglCreateContext HOT 4
- AttributeError: 'NoneType' object has no attribute 'rasterise' HOT 4
- About render normal map HOT 1
- [Error] "This compiler appears to be too old to be supported by Eigen" in building rasterize HOT 2
- Dirt installation and test errors
- Cmake error HOT 1
- Installation errors: Tensorflow-protobuf incompatibility with tensor flow v2.13.0 HOT 17
- dirt/csrc/gl_common.h:46] extensions eglQueryDevicesEXT, eglQueryDeviceAttribEXT and eglGetPlatformDisplayEXT not available
- [Test Error]no egl devices found Aborted (core dumped)
- Does this work on WSL2? HOT 1
- Error while pip install . HOT 1
- error of 'pip install .' HOT 8
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from dirt.