pmmcmullen94/rfm12b

RFM12B library

NOTE: not actively maintained

This library is not actively maintained anymore but is kept for reference and can still be used with RFM12b transceivers.

RFM12B Library

By Felix Rusu ([email protected])
Based on the RFM12 driver from jeelabs.com (2009-02-09 [email protected])
http://opensource.org/licenses/mit-license.php

Features:

• easy API with a few simple functions for basic usage
• 127 possible nodes on 256 possible networks
• 128 bytes max message length
• customizable transmit power (8 levels) for low-power transmission control
• customizable air-Kbps rate allows fine tuning the transmission reliability vs speed (transmitting slower is more reliable but takes more time which implies more power usage)
• Sleep/Wakeup functionality for power saving
• Low battery detector with customizable low voltage threshold
• Interrupt driven
• Support for targeted ACK instead of broadcasted ACK (possible because of the new source byte in the header) encryption with XXTEA algorithm by David Wheeler, adapted from http://en.wikipedia.org/wiki/XXTEA Support for these chips: ATMega8 family (ATmega168, ATMega328) ATMega2560, ATMega1280, ATMega644P, ATTiny84, ATTiny44, ATMega32u4. So far only tested on ATMega 328/P
• wireless programming (for more info click here, here and here)
• the library needed for wireless programming is now here, install it in your Arduino/libraries folder (WirelessHEX for RFM12B)

Installation

Copy the content of this library in the "Arduino/libraries/RFM12B" folder.
To find your Arduino folder go to File>Preferences in the Arduino IDE.
See this tutorial on Arduino libraries.

Saple usage

• Sender
• Receiver
• More examples in the Examples folder

TODOs (in order of priority):

• Support automatic ACK handling
• Refactor changing the SPI CS signal
• Add support for hosting multiple radios on 1 MCU