ppooll-dev / ppooll Goto Github PK
View Code? Open in Web Editor NEWppooll (formerly lloopp) is an audio & video performance environment written in max/MSP.
Home Page: https://ppooll.klingt.org/
License: MIT License
ppooll (formerly lloopp) is an audio & video performance environment written in max/MSP.
Home Page: https://ppooll.klingt.org/
License: MIT License
peqbank~ (external by CNMAT) crashes often
maybe skip that act?
I was using ppooll today for quite a while, and if I changed the volume on my audio interface (an Apogee Duet 2) after not doing so for a while, all of the sound would stop and I would get the spinning ball on my mac. Eventually, I could turn host@ on and off and sound would come back on. Very strange, it was sort of like something went to sleep and I woke it up by turning the knob on the Duet. I haven't had this issue with previous versions of ppooll (l can't say for sure if it's since the overall 8.5 update, but I think so). Latest source code and Max. Thanks for your help!
suspected reason: scripted audio inlets or ho_st output channel changes
some good ideas:
allow usage of mc-buffers
questions: how to deal with different input channel count vs. buffer channel count?
proposal: record into available channels, drop excess channels
@klausfilip @the-steech
i can't seem to delete yesterday's test branches – any clues?
mc-ify in the process if easily doable …
in the meanwhile, i was adding "mix adds" in ll.blues.
@jpsteccato please try it.
i hope its behaving the same like in the early days.
review orphaned help patchers
either remove them or replace the original corresponding act with a working version
"period" sequencer act wraps transport ramp weirdly instead of offsetting phase when a phase offset value is provided.
get this error, when loading matriarch@:
js: can't find file createGains.js
@jpsteccato you're already nearly there …
😊
as far as i understand it is not possible to set single values for ll_numer in multislider-mode. am i correct, @klausfilip ?
(something like "set/select 2 0.78787" as exists in cycling's multislider)
in acts:
pp_world - version of jit.world@
jit.slide@_copy ?
hardplayJS ?
jit.videoplanesP ?
I spent some time with these acts today and I had repeated issues routing the outputs for both of them. For matrix@, primarily in stereo mode, after adding a couple outputs (to delay and reverb for example), the matrix pretty quickly did not route the outputs to where they should go. Adding a third output would push it into the #2 spot (i.e., adding reverb as the third output would make it so that it was #2 in the matrix).
I had a similar experience with matriarch@. It worked well for a time, but eventually (I think after the 5th or 6th output) multiple routings seemed broken (either going to the wrong place or nowhere at all). I hope I explained this ok, thank you for your help.
PS- I'm on latest max and ppooll code, Mac running Catalina
test by routing audio from any act to host channels 3 & 4, and check monitor in rec@ when set to "adoutput" mode
I am having an issue with the channel output of numerous acts. Stereo sound generators (i.e., flop@, benjolino@, etc.) open with "2" in the bottom right output count, but will play in mono. Changing the output to "1" will send out stereo audio. Some effects acts (freeverb@ and gverb@ are ones I've tried) don't allow me to change the number to "1", so just stay mono. Wanted to share that, thanks for all the hard work!
PS- Using a Mac on Catalina, with latest Max and build of ppooll
its not enough to hide the "s" screen button in ho_st.
an environment, that has "screen 1" will just show the screen window.
we need to disable screen in live.ppooll completely.
a thought:
the js ll.live.check_envi_type is looking for @LiVe or not, but only at loading an act.
i guess this should be a global variable at loadbang in ho_st.
this is essential for some patches where actname is requested after loading.
we need a strategy to know if we are in live or not.
Hi there,
I am trying to use random@, and I've found that it is malfunctioning for me. It is not sending out the desired result to other acts (it doesn't seem to be sending anything at all), and it will also erase all data for each randomizer if either another randomizer is selected (alt-clicking on another number) or the number slider is changed on the far left. This is new behavior as of the last couple of days (I'm not sure what has changed, but I just now deleted all ppooll data and reinstalled Max, so it's all the freshest stuff). Thanks!
please have a look, if this seems correct...
apparently there is a new binary by volker böhm here:
https://github.com/v7b1/max-thirdParty_externals
to be tested
There are quite a few @cts missing, that are unstable and buggy - and fixed versions already have been made in the #act-share in the ppooll discord. Acts i've noticed already: forbiddenplannet (vocoder is broken), the new ll.blues is very problematic, changing send amounts from one act to another is very unpredictable, if you want to upload some of the best acts from the discord, i'd really reccomend taking a look at the efx acts they are wonderful and could use some love! Thank you once again ppooll, the elites of music production software!
add missing help patchers:
but show up after second try.
ll.blues seems to force-mix output to stereo at the minimum, even if i 1 channel is specified as output in "chans" variable.
dict: file not found: notfound …/Max 8/Library/ppooll_presets/****/_.json
happens with apparently every opened act.
does not seem to hinder the act's functionality …
🤔
i created a new branch called "presets.json" (bad name, sorry)
but this is only for you wizards to test my work, i did on some things:
I was trying to clone latest from the repo and I got this error:
error: invalid path 'patchers/abstractions/filip/ll.pnew?.maxpat'
fatal: unable to checkout working tree
warning: Clone succeeded, but checkout failed.
I'm not sure if I need to do something different or if there's some other workaround? Filenames with ?
and several other characters are illegal under Windows. However, in the .ZIP file download of my ppooll 8.5.1
release and this same file is named this: ll.pnew_.maxpat
Could we change the repo filenames for this and others to not have characters which Windows does not allow? Or is there some other way we can work nicely between OSes?
update _act_overview
maybe: put act overview cellblock contents in external file for easier updateability
@klausfilip are these ready to be deleted?
should we set the maximum property in any "number of channels" selection across ppooll acts/ll.blues?
for example: ho_st "chan" ll_num slider, i think the max should be set to 1024 channels
ho_st stereo mixdown should (imo) eliminiate mc-output and ONLY produce stereo output. else people can use other means to produce an extra stereo mix.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.