probablyrusty/macstadium-aws-vpn-master

Master Terraform repo (with modules) for creating a VPN between a MacStadium Private Cloud and an AWS VPC

MacStadium AWS VPN

MacStadium AWS VPN is a project which, using HashiCorp's Terraform, automates the setup of a persistent VPN tunnel between a MacStadium Hosted Mac Private Cloud and an AWS VPC.

Essentially, this project can be used with Terraform to automatically perform all of the following in a single process:

• (Optionally) create a basic AWS VPC with an Internet Gateway and single subnet.
• (Optionally) create a Virtual Private Gateway and attach it to the VPC
• Create an AWS IPSec VPN suitable for persistent tunneling between MacStadium and AWS
• Configure a MacStadium Cisco firewall (part of the Hosted Mac Private Cloud offering) to use this AWS VPN
• (Optionally) create one or more test EC2 instances in the AWS VPC
• (Optionally) create one or more test VMs in the MacStadium Hosted Mac Private Cloud

Three use cases are supported:

1. Build Everything: "I want to start from scratch in AWS. Have the automation create a VPC for me and all the related accoutrements. Then build the AWS VPN and configure my MacStadium Cisco firewall to use it."

2. VPC Already Exists: "I already have a VPC. Please just have the automation create a Virtual Private Gateway and the VPN in AWS. I'll supply ID for my VPC snd the ID(s) for one or more existing route tables in my VPC that I want to route to and from MacStadium."

3. Gateway Aleady Exists: "I already have a VPC and I also already have a Virtual Private Gateway created and attached to it. I want the automation to only create the VPN between AWS and MacStadium. I'll supply the ID of the existing AWS Virtual Private Gateway that is already in use for my VPC."

The general process of deploying this automation is not only simple and straightforward, it is exactly the same for all three use cases:

1. Customize some variables

2. Run terraform apply

3. Profit

Before You Begin

First some prerequisites:

• Ideally, Git should be installed, if it is not already.

• You should have a local copy of this repo on your own computer. One very easy way to obtain it is simply to clone it from GitHub:

   git clone https://github.com/ProbablyRusty/macstadium-aws-vpn.git

• You'll definitely need to have Terraform installed. One easy way to do that on a Mac would be to use Homebrew as follows:

   brew install terraform

• AWS API Credentials with sufficient privileges for creating VPC and EC2 resources for the AWS account you will be working with will be needed.

• Several credentials and technical details about your MacStadium Hosted Mac Private Cloud will be needed as well. Typically, all of this information is supplied by MacStadium in a custom spreadsheet document titled YourName_IP_PLAN.xlsx, or something similar. Contact MacStadium with questions.

• When you run terraform apply in Step 2 (below), your computer will need to be connected to the per-user IPSec VPN your MacStadium Cisco firewall, which is enabled by default as part of your Hosted Mac Private Cloud. MacStadium has posted setup instructions on how to accomplish that. Again, make sure you are connected to this VPN from your computer prior to proceeding with Step 2 (below).

Step 1: Customize Variables

This project includes a variables template file which you will need to customize for your specific use case, credentials, and specifications before applying the automation.

Each variable in the my-variables.hcl file is documented in-line within that file. For convenience and easy reference, each of those variables (and its explanatory comment) is additionally included in an Appendix at the end of this ReadMe.

But generally, you will simply need to edit each variable with appropriate values in this file prior to proceeding.

Note that the needed_in_aws variable corresponds to the three supported use cases summarized at the beginning of this ReadMe, and should be set accordingly to your particular use case. Here are some specifics on what that means:

Which Use Case?	Value To Use For needed_in_aws	Creates VPC	Creates Gateway	Creates VPN	AWS Test Instances	MacStadium Test VMs
Build Everything	create_vpc	Yes	Yes	Yes	Optional	Optional
VPC Already Exists	create_gateway	No	Yes	Yes	No	Optional
Gateway Aleady Exists	just_vpn	No	No	Yes	No	Optional

Step 2: Run Terraform

Okay, so now that you have taken care of perquisites and also set custom values for all appropriate variables, you can now proceed.

First, cd into the directory of this project, if you haven't already:

cd macstadium-aws-vpn

Next, ask Terraform to fetch any modules which are referenced in this project:

terraform get

Now, although technically this is not a necessary step, it is good practice to try terraform plan prior to actually building or configuring anything. This command will evaluate the process and let you know what Terraform would do if you ran terraform apply, but it will not actually perform any of those actions at this stage. Specifically, using your custom variables, you would do this:

terraform plan -var-file=my-variables.hcl

Errors after this command might indicate connectivity problems, credentials problems, or any number of other problems regarding the variable values you supplied. (Remember, your computer does need to be connected to your MacStadium Cisco IPSec VPN.) To the extent you are able, remedy any issues, and try terraform plan again.

If and when the terraform plan is successful, you should see something like this:

Plan: 21 to add, 0 to change, 0 to destroy.

Okay, great! You can now proceed to terraform apply, which will actually create resources and configure infrastructure. (Note that this will create real resources in AWS, which will incur costs from AWS.) Just as you did with terraform plan you will want to use your own custom variables values when running terraform apply:

terraform apply -var-file=my-variables.hcl

While the actual configuration process and specific resources created will vary based on the custom variables values you supplied, in any event, this will take some time. Terraform provides reasonably verbose output during all of its activity.

Just as with the terraform plan, if and when the process completes successfully, you should expect to see something like this:

Apply complete! Resources: 21 added, 0 changed, 0 destroyed.

At this point, your VPN between your AWS VPC and your MacStadium Hosted Mac Private Cloud should be fully configured, up and running, and ready for traffic between the two networks.

If, perhaps, you were only testing and now want to reverse the whole process, you can run terraform destroy to cleanly destroy all resources and remove all configurations Terraform created (including configuration of your MacStadium Cisco firewall):

terraform destroy -var-file=my-variables.hcl

Step 3: Profit

Nice work! There is no Step 3.

Appendix: Reference List of Variables

• needed_in_aws
• aws_vpc_cidr
• existing_vpc_id
• existing_vgw_id
• vpc_route_table_ids
• aws_region
• aws_access_key
• aws_secret_key
• macstadium_cidr
• cisco_inside_1_ip_address
• cisco_wan_ip_address
• cisco_firewall_username
• cisco_firewall_password
• macstadium_vcenter_management_username
• macstadium_vcenter_management_password
• macstadium_vcenter_management_ip_address
• macstadium_vcenter_datacenter_name
• macstadium_vcenter_cluster_name
• macstadium_vcenter_datastore_name
• create_macstadium_test_instances
• macstadium_vcenter_vm_template_name
• number_of_aws_test_instances
• number_of_macstadium_test_instances

Variable: needed_in_aws

This value determines which AWS resources need to be created as part of this automated process. The three supported values are: create_vpc, create_gateway, and just_vpn.

Set to create_vpc if you want to create a new AWS VPC, AWS Virtual Private Gateway, AWS VPN, and (optionally) one or more t2.nano Amazon Linux test Instances inside of this new AWS VPC. This is the best option if you currently have no infrastructure in AWS, or if you want to demo or experiment with this automated process.

Set to create_gateway if you already have an existing AWS VPC, and you want to create an AWS Virtual Private Gateway and AWS VPN for this already-existing AWS VPC, for which you will supply the VPC ID and one or more already-existing Route Table IDs inside your VPC. (See the existing_vpc_id and vpc_route_table_ids variables below.)

Set to just vpn if you already have an existing AWS VPC and AWS Virtual Private Gateway, and you simply want to create an AWS VPN for this already-existing AWS Virtual Private Gateway, for which you will supply the Virtual Private Gateway ID and VPC ID. (See the existing_vgw_id and existing_vpc_id variables below.)

Variable: aws_vpc_cidr

If you set the needed_in_aws variable to create_gateway or just_vpn, then this is is network for your existing AWS VPC. (This needs to be in CIDR notation, for example: 172.20.0.0/16.)

Otherwise, if you set needed_in_aws to create_vpc, then this is the desired network for your new AWS VPC that will be created. (Again, this needs to be in CIDR notation, for example: 172.20.0.0/16.))

If you set needed_in_aws to create_gateway or just_vpn, then you need to provide a VPC ID (for example: vpc-1234abcd) of an already-existing VPC (located in the AWS Region you specified).

If you set needed_in_aws to create_vpc, then you may set this to none, since a brand new VPC will be automatically created.

Variable: existing_vpc_id

If you set needed_in_aws to create_gateway or just_vpn, then you need to provide a VPC ID (for example: vpc-1234abcd) of an already-existing VPC (located in the AWS Region you specified).

If you set needed_in_aws to create_vpc, then you may set this to none, since a brand new VPC will be automatically created.

Variable: existing_vgw_id

If you set needed_in_aws to just_vpn, then you need to provide a Virtual Private Gateway ID (for example: vgw-1234abcd) of an already-existing Virtual Private Gateway (located in the AWS Region you specified).

If you set needed_in_aws to create_vpc or create_gateway, then you may set this to none, since a brand new Virtual Private Gateway will be automatically created.

Variable: vpc_route_table_ids

If you set needed_in_aws to create_gateway, then you need to provide a comma-separated list of already-existing Route Table IDs (for example: rtb-1234abcd,rtb-9876dcba) that reside in the VPC you specified in existing_vpc_id. You only need to include the IDs for Route Tables for that you want to include for routing traffic between AWS and MacStadium. If you only have one Route Table in the VPC (or choose to only include one Route Table here), then just specify the single Route Table ID without any commas.

If you set needed_in_aws to create_vpc, then you may set this to none, since a brand new Route Table will be automatically created in the brand new VPC which will also be automatically created.

If you set needed_in_aws to just_vpn, then you may also set this to none, since only an AWS VPN will by created and simply attached to your already-existing Virtual Private Gateway. Further management of your Route Tables will be your repsonsibility in this scenario.

Variable: aws_region

AWS Region where your VPC is (or will be) located (for example, us-east-1).

Variable: aws_access_key

AWS Access Key ID for a valid pair of API credentials for your AWS asccount (for example: AKIAI44QH8DHBEXAMPLE).

Variable: aws_secret_key

AWS Secret Key for a valid pair of API credentials for your AWS asccount (for example: wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY).

Variable: macstadium_cidr

Network for the Private-1 network of the MacStadium Private Cloud in CIDR notation, (for example: 10.254.20.0/24), provided by MacStadium in your IP_PLAN document.

Variable: cisco_inside_1_ip_address

IP address for the Cisco firewall's Inside-1 interface, provided by MacStadium in your IP_PLAN document.

Variable: cisco_wan_ip_address

IP address for the Cisco firewall's WAN interface, provided by MacStadium in your IP_PLAN document.

Variable: cisco_firewall_username

Username for the MacStadium Cisco firewall, provided by MacStadium in your IP_PLAN document.

Variable: cisco_firewall_password

Password for the MacStadium Cisco firewall, provided by MacStadium in your IP_PLAN document.

Variable: macstadium_vcenter_management_username

Username for MacStadium VCenter management, provided by MacStadium in your IP_PLAN document.

Variable: macstadium_vcenter_management_password

Password for MacStadium VCenter management, provided by MacStadium in your IP_PLAN document.

Variable: macstadium_vcenter_management_ip_address

IP address for MacStadium VCenter management, provided by MacStadium in your IP_PLAN document.

Variable: macstadium_vcenter_datacenter_name

Name of your MacStadium VCenter datacenter, provided by MacStadium, (for example: MacStadium - VEGAS).

Variable: macstadium_vcenter_cluster_name

Name of your MacStadium VCenter cluster, provided by MacStadium, (for example: XSERVE_Cluster).

Variable: macstadium_vcenter_datastore_name

Name of your MacStadium VCenter data store, provided by MacStadium, (for example: 1TB_SSD).

Variable: create_macstadium_test_instances

Set to true if you want to create test VMs in your MacStadium Private Cloud. Otherwise set to false. Note that if you do set this to true, you will need an already-existing VM template in your Private Cloud from which to clone these test VMs.

Variable: macstadium_vcenter_vm_template_name

Name of of a Virtual Machine Template, previously uploaded or created by you in VCenter, (for example: centos). If you set create_macstadium_test_instances to false, then you may set this to none.

Variable: number_of_aws_test_instances

If you set needed_in_aws to create_vpc, then specify the number of Amazon Linux test instances you would like to automatically create inside this new VPC. Note that a brand new private SSH key to access the ec2-user account on these Instances will be generated in this directory on your local machine. That key file will be named macstadium_aws_key. Also note that if you do not want to create any Amazon Linux test instances in this scenario, you may set this value to 0.

Variable: number_of_macstadium_test_instances

If you set create_macstadium_test_instances to true, then specify the number of test VMs you would like to automatically create inside of your MacStadium Private Cloud. This VMs will need to be based on a Virtual Machine Template which you previously have uploaded or created by you in VCenter (see: macstadium_vcenter_vm_template_name).