a temperature monitoring system based on arduino.
Atmos reads three sensor, calculates average temperature and removes
the sensor which has a wrong value.
It also shows simple messages:
Temp High
if temperature is higher than the top threshold.
Temp Low
if temperature is lower than the down threshold.
Temp OK
if temperature is in between top and down thresholds.
the thresholds can be configured via settings menu.
Arduino Port Number | Part |
---|---|
13 | LCD(D7) |
12 | LCD(D6) |
11 | LCD(D5) |
10 | LCD(D4) |
9 | LCD(E) |
8 | LCD(RS) |
7-0 | KeyPad |
A0-A2 | Sensors |
Entering settings menu can be done by pressing A
. Atmos will ask a password, default is 123467
.
By pressing B
or C
thresholds can be configured, decimal values are accepted. At any state A
act as Cancel
, D
as Enter
and B
as Back
.